TOOLS (6)

-€2.65

DRAG SPECIALTIES 6-in-1 Spoke Wrench — Standard style

Compact 6-in-1 spoke wrench that fits all standard spokes, perfect for quick wheel adjustments.

€7.49 €10.14

-€13.22

JIMS Rear Axle Installation Guide Tool — JIMS, Rear Axle, Black

Tool for aligning rear wheel, caliper brackets, hubs and spacers on Big Twin models with hollow 1" (25 mm) standard axles. Made in the USA.

€51.42 €64.64

-€1.90

DRAG SPECIALTIES Softail Shock Preload Adjuster Tool — Silver

Makes preload adjustments much easier on Softail rear suspension.

€5.35 €7.25

-€6.53

DRAG SPECIALTIES Heavy-Duty Chain Breaker — for chains 420–630, Black, Red

Compact tool with a compression screw for fast pin removal; fits a wide range of common chain sizes.

€18.47 €25.00

-€4.94

DRAG SPECIALTIES Shock Spanner Wrench — Silver, Zinc-Plated Steel

Heavy-duty shock wrench for easy rear shock spring preload adjustment.

€13.95 €18.89

Clutch Hub Puller — 10" stud, E84 Big Twin fit, Black

-€13.56

DRAG SPECIALTIES Clutch Hub Puller — 10" stud, E84 Big Twin fit, Black

Removes clutch hubs without removing the transmission end cover; 10" stud; fits E84 Big Twin models.

€38.32 €51.88

Primary Locking Bar — Primary Belt Drive, Primary Chain Drive, Black

-€9.57

JIMS Primary Locking Bar — Primary Belt Drive, Primary Chain Drive,...

Immobilizes the primary drive for safe tightening and loosening during maintenance. Prevents rotor and magnet damage.

€37.23 €46.80

Primary Locking Bar — Primary (drive), Black

-€9.57

JIMS Primary Locking Bar — Primary (drive), Black

Immobilizes the primary drive; allows torque-wrench tightening or breaker-bar loosening; prevents rotor and magnet damage; made in the U.S.A.

€37.23 €46.80

-€5.71

DRAG SPECIALTIES Jumper Cable — 12-gauge, 183 cm (6'), Black, Red

Durable coating and rubber-encased grips for safer, more efficient jumps. 12-gauge cable.

€16.14 €21.85

-€32.08

JIMS M8 Shifter Shaft Bushing Remover & Installer — 5512, Black, Kit

Toolset for quick removal and precise installation of shifter shaft bushings to the correct depth.

€124.76 €156.84

Crankshaft Bearing Tool — Right, Crankcase, Black

-€65.63
Out of Stock

JIMS Crankshaft Bearing Tool — Right, Crankcase, Black

Removes and installs right crankcase bearings without damaging the case.

€255.20 €320.83

-€2.20

DRAG SPECIALTIES Cargo Net — 38 cm (15") x 38 cm (15"), plastic hooks, black

Elastic cargo net with 2.5" x 2.5" mesh; secures loads quickly and stores compactly.

€6.23 €8.43

-€21.49

JIMS Evolution Cylinder Stud Assembly Tool — Engine

Captive ball-bearing assembly tool set 1" from top for precise stud installs; fits all Evolution Big Twin and XL models. Made in the U.S.A.

€83.58 €105.07

-€17.00
Out of Stock

JIMS Primary Locking Bar — Front engine sprocket, Black

Immobilizes the primary drive for clutch and primary-drive service. Allows torque-wrench tightening or breaker-bar loosening. Made in the U.S.A.

€66.14 €83.14

-€29.18
Out of Stock

JIMS Cruise Drive Vise Stand — Black, Blue

Aligns transmission gears and shafts for safe, damage-free installation; speeds and simplifies assembly.

€113.50 €142.68

-€12.99

JIMS Shifter Shaft Sleeve Tool — For 5-Speed Transmission, Black

Removes and installs shifter shaft sleeves, assemblies and drums. Made in the USA.

€50.45 €63.44

Main Drive Gear Bearing/Seal Installation Tool — Cruise Drive, 6-speed, Black

-€38.43
Out of Stock

JIMS Main Drive Gear Bearing/Seal Installation Tool — Cruise Drive,...

Precision installer for main drive gear bearings and seal; prevents marring and seats components to correct depth using a one-ton press. Made in USA.

€149.48 €187.91

-€56.85

JIMS Transmission Door Puller — Blue

Removes transmission door with gears and shaft attached. Will not damage door bearings. Made in the USA.

€221.03 €277.88

-€395.75

JIMS Timken® Case Bearing Tool — Engine Case, Steel, Black, PN 959

Precision insert sleeve and complete installation hardware to restore case bearing fitment. Requires hand tools and a two-ton press. Timken bearing not included.

€1,539.00 €1,934.75

Balancer Shaft Removal Tool — Left side, engine case, Black

-€72.29

JIMS Balancer Shaft Removal Tool — Left side, engine case, Black

Removes front and rear counter‑balancer shaft bearing assemblies from the left engine case; fits 96" and 110" Beta® engines. Made in the U.S.A.

€281.14 €353.43

Bearing and Race Puller Tool — Pinion shaft, flywheel bearing race, Black

-€109.87
Out of Stock

JIMS Bearing and Race Puller Tool — Pinion shaft, flywheel bearing...

Precision tool for removing press-fit bearings and gears from motorcycle pinion and flywheel shafts. Multi-use and made in the U.S.A.

€427.30 €537.17

Sealed Wheel Bearing Removal/Installation Kit — 3/4", 1", 25 mm

-€114.88

JIMS Sealed Wheel Bearing Removal/Installation Kit — 3/4", 1", 25 mm

Removes and installs 3/4" , 1" and 25 mm sealed wheel bearings, with or without ABS. Made in the USA.

€446.75 €561.63

Starter Jackshaft Seal Installer Tool — Jackshaft, Black

-€40.67

JIMS Starter Jackshaft Seal Installer Tool — Jackshaft, Black

Installs the starter jackshaft seal without distortion; fits the seal in the upper part of the inner primary of Big Twins. Made in the U.S.A.

€158.18 €198.85

Harley Davidson Cruise Drive 6-Speed Main Drive Gear Remover Tool — Black

-€64.36

JIMS Harley Davidson Cruise Drive 6-Speed Main Drive Gear Remover...

Removes the main drive gear from the main bearing while in the transmission case without requiring an arbor press.

€250.28 €314.64

-€62.84

JIMS Inner Primary Bearing and Seal Remover/Installer Tool — Black kit

Safely removes and installs the inner primary bearing and seal without harming bearings. Made in the USA.

€244.42 €307.26

-€18.28

JIMS O² Sensor Tool — Socket, Silver

Removes and installs oxygen sensors on fuel-injected models. Withstands up to 125 ft.-lbs. Made in the USA.

€71.09 €89.37

Transmission Case Shifter Shaft Seal Installer — For 6-Speed Transmission, Blue

-€12.27

JIMS Transmission Case Shifter Shaft Seal Installer — For 6-Speed...

Precision tool that aligns and installs shifter seals to the correct depth.

€47.70 €59.97

Bearing Adapter — Sprocket shaft fit for '06 Harley-Davidson Dyna Glide, '07-'17 Twin Cam

-€28.65
Out of Stock

JIMS Bearing Adapter — Sprocket shaft fit for '06 Harley-Davidson...

Allows installation of a shaft bearing on '06 Harley-Davidson Dyna Glide and '07-'17 Twin Cam; fits sprocket shaft applications and works with compatible bearing tools.

€111.41 €140.06

Transmission Case Shifter Shaft Seal Installer — For 5-Speed Transmission, Blue

-€12.56

JIMS Transmission Case Shifter Shaft Seal Installer — For 5-Speed...

Makes installing shifter shaft seals precise and effortless. Aligns and centers the seal to the correct depth for reliable fitment. Made in the USA.

€48.85 €61.41

-€20.47

JIMS Shifter Shaft Sleeve Tool — 6-speed transmission, Black

Removes and installs shifter shaft sleeves, assemblies and drums; improves alignment and speeds installation. Made in the USA.

€79.61 €100.08

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company