TOOLS (6)

-€57.61
Out of Stock

JIMS Transmission Sprocket Locknut Wrench — Black

Extra-long two-piece wrench designed to remove the hex nut at the end of the main drive gear. Inner collar retains wrench to nut for safer work.

€224.02 €281.63

Balancer Shaft Removal Tool — Left side, engine case, Black

-€72.29
Out of Stock

JIMS Balancer Shaft Removal Tool — Left side, engine case, Black

Removes front and rear counter‑balancer shaft bearing assemblies from the left engine case; fits 96" and 110" Beta® engines. Made in the U.S.A.

€281.14 €353.43

Bearing and Race Puller Tool — Pinion shaft, flywheel bearing race, Black

-€109.87
Out of Stock

JIMS Bearing and Race Puller Tool — Pinion shaft, flywheel bearing...

Precision tool for removing press-fit bearings and gears from motorcycle pinion and flywheel shafts. Multi-use and made in the U.S.A.

€427.30 €537.17

Sealed Wheel Bearing Removal/Installation Kit — 3/4", 1", 25 mm

-€114.88
Out of Stock

JIMS Sealed Wheel Bearing Removal/Installation Kit — 3/4", 1", 25 mm

Removes and installs 3/4" , 1" and 25 mm sealed wheel bearings, with or without ABS. Made in the USA.

€446.75 €561.63

Starter Jackshaft Seal Installer Tool — Jackshaft, Black

-€40.67
Out of Stock

JIMS Starter Jackshaft Seal Installer Tool — Jackshaft, Black

Installs the starter jackshaft seal without distortion; fits the seal in the upper part of the inner primary of Big Twins. Made in the U.S.A.

€158.18 €198.85

Harley Davidson Cruise Drive 6-Speed Main Drive Gear Remover Tool — Black

-€64.36
Out of Stock

JIMS Harley Davidson Cruise Drive 6-Speed Main Drive Gear Remover...

Removes the main drive gear from the main bearing while in the transmission case without requiring an arbor press.

€250.28 €314.64

-€62.84
Out of Stock

JIMS Inner Primary Bearing and Seal Remover/Installer Tool — Black kit

Safely removes and installs the inner primary bearing and seal without harming bearings. Made in the USA.

€244.42 €307.26

-€18.28
Out of Stock

JIMS O² Sensor Tool — Socket, Silver

Removes and installs oxygen sensors on fuel-injected models. Withstands up to 125 ft.-lbs. Made in the USA.

€71.09 €89.37

Transmission Case Shifter Shaft Seal Installer — For 6-Speed Transmission, Blue

-€12.27
Out of Stock

JIMS Transmission Case Shifter Shaft Seal Installer — For 6-Speed...

Precision tool that aligns and installs shifter seals to the correct depth.

€47.70 €59.97

Bearing Adapter — Sprocket shaft fit for '06 Harley-Davidson Dyna Glide, '07-'17 Twin Cam

-€28.65
Out of Stock

JIMS Bearing Adapter — Sprocket shaft fit for '06 Harley-Davidson...

Allows installation of a shaft bearing on '06 Harley-Davidson Dyna Glide and '07-'17 Twin Cam; fits sprocket shaft applications and works with compatible bearing tools.

€111.41 €140.06

Transmission Case Shifter Shaft Seal Installer — For 5-Speed Transmission, Blue

-€12.56
Out of Stock

JIMS Transmission Case Shifter Shaft Seal Installer — For 5-Speed...

Makes installing shifter shaft seals precise and effortless. Aligns and centers the seal to the correct depth for reliable fitment. Made in the USA.

€48.85 €61.41

-€20.47
Out of Stock

JIMS Shifter Shaft Sleeve Tool — 6-speed transmission, Black

Removes and installs shifter shaft sleeves, assemblies and drums; improves alignment and speeds installation. Made in the USA.

€79.61 €100.08

-€41.24
Out of Stock

JIMS Engine Rotator — flywheel assembly, Black

Rotates the flywheel and piston assembly for pushrod adjustments, engine builds, and clearance checks. Not for use with impact wrenches.

€160.35 €201.59

-€81.19
Out of Stock

JIMS 5 & 6-Speed Countershaft Bearing Remover/Installer Tool — Black

Removes and installs closed-end countershaft bearings on 5- and 6-speed transmissions without a press.

€315.80 €396.99

Replacement Sleeve for Timken® Case Bearing Tool — Steel, Silver, Kit

-€60.93
Out of Stock

JIMS Replacement Sleeve for Timken® Case Bearing Tool — Steel,...

Several times stronger than stock aluminum case material; restores bearing support. Made in the USA.

€236.94 €297.87

Inner Primary Bearing and Seal Removal and Installation Tool — Black, Chrome

-€69.45
Out of Stock

JIMS Inner Primary Bearing and Seal Removal and Installation Tool —...

Precision tool for removal and installation of inner primary bearings and seals; eliminates the need for a press and reduces risk of part damage.

€270.08 €339.53

Inner Primary Bearing and Seal Remover/Installer Tool — 967-4, Black

-€25.05
Out of Stock

JIMS Inner Primary Bearing and Seal Remover/Installer Tool — 967-4,...

Removes and installs the inner primary bearing and seal that the transmission mainshaft passes through by pushing on the bearing's outer perimeter to protect new bearings. Made in the USA.

€97.41 €122.46

Inner Primary Bearing and Seal Remover/Installer Tool — 967-5, Black

-€8.91
Out of Stock

JIMS Inner Primary Bearing and Seal Remover/Installer Tool — 967-5,...

Removes and installs inner primary bearings and seals by pushing on the bearing's outer perimeter to prevent damage to new bearings. Made in the USA.

€34.64 €43.55

5-Speed Main Case Seal Installer Tool — Blue

-€23.44
Out of Stock

JIMS 5-Speed Main Case Seal Installer Tool — Blue

Ensures correct alignment and seal protection during installation.

Made in the USA.

€91.16 €114.60

Ultimate Clutch Adjusting Tool — Blue, Chrome, '85-'20 Big Twins

-€20.57
Out of Stock

JIMS Ultimate Clutch Adjusting Tool — Blue, Chrome, '85-'20 Big Twins

Quickly and accurately tighten the clutch adjusting screw jam nut without moving the screw. Includes Allen wrench that stores in the handle. Made in the USA. Fits all '85-'20 Big Twins with mechanical clutch.

€79.99 €100.56

Shifter Mechanism Sleeve Remover/Installation Tool — Cruise Drive Big Twin fit, Black

-€30.54
Out of Stock

JIMS Shifter Mechanism Sleeve Remover/Installation Tool — Cruise...

Removes and installs the shifter mechanism sleeve in cruise drive Big Twin transmissions without disassembling the transmission.

€118.80 €149.34

-€31.61
Out of Stock

JIMS Shifter Shaft Bushing Tool — Black, touring models, 5- or 6-speed

Removes and installs shifter shaft bushings in Big Twin primaries without removing the inner primary. For touring models with 5- or 6-speed transmission. Made in the USA.

€122.97 €154.58

-€16.38
Out of Stock

JIMS Countershaft 1st Scissor Gear Alignment Tool — Cruise Drive, Blue

Essential tool for correct installation and tooth mesh of the first scissor gear on the countershaft. Maintains alignment under spring pressure. Made in the USA.

€63.70 €80.08

Balancer Shaft Sprocket Alignment Tool — Balancer Shaft, Drive Chain, Black

-€96.68
Out of Stock

JIMS Balancer Shaft Sprocket Alignment Tool — Balancer Shaft, Drive...

Removes guesswork when aligning the balancer shaft sprocket and chain. Made in the U.S.A.

€375.99 €472.67

-€23.10
Out of Stock

JIMS Valve Guide Remover — Black

Removes and installs shoulderless valve guides and valve seals. Made in the U.S.A.

€89.84 €112.94

-€15.43
Out of Stock

JIMS Shoulderless Valve Guide Tool — Valve guide, black

Removes and installs shoulderless valve guides and seals. Made in the U.S.A.

€60.02 €75.45

Thread Chaser Tap Set — coarse sizes 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13, 9/16-12, silver

-€20.26
Out of Stock

JIMS Thread Chaser Tap Set — coarse sizes 1/4-20, 5/16-18, 3/8-16,...

Economical set for cleaning painted or powder-coated threads; includes coarse sizes 1/4-20 through 9/16-12; not for cutting new threads; made in the U.S.A.

€78.76 €99.02

-€50.49
Out of Stock

JIMS Oil Filter Cutter — Black

Secures and cuts filter bases for inspection; fits filters up to 5-1/2" diameter.

€196.32 €246.81

Harley Davidson Cruise Drive 6-Speed Main Drive Gear and Bearing Remover/Installer Kit — 6-Speed

-€121.68
Out of Stock

JIMS Harley Davidson Cruise Drive 6-Speed Main Drive Gear and...

Complete kit to remove and install the main drive gear or main bearing on Harley-Davidson Cruise Drive transmissions (2006–present). No case damage when used as directed.

€473.22 €594.90

Balancer Inner Bearing Installer — Left side, engine case, kit, black

-€81.42
Out of Stock

JIMS Balancer Inner Bearing Installer — Left side, engine case,...

Installs inner balancer bearing in left engine case without an arbor press.
Performs installation on a work bench; fits early and late Beta® cases.
Made in the U.S.A.

€316.65 €398.07

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company