TOOLS (6)

-€253.07

TEXA IDC5 PLUS BIKE SOFTWARE — Motorcycle, License

Complete, practical and intuitive diagnostic software that guides you from fault detection to resolution.

€823.53 €1,076.60

-€72.31

TEXA License Update — RIS.BIKE/3

Unlock updates for part number 38070682. Check for missing months before purchase. Non-returnable license.

€235.29 €307.60

-€54.23

TEXA License Update — RIS.BIKE/2

License update unlocking updates for part number 38070682. Check missing months before purchase. Non-returnable.

€176.47 €230.70

-€36.15

TEXA License Update — TEXA, RIS.BIKE/1B

License to unlock updates for part number 38070682. Check for missing months prior to purchase. Non-returnable.

€117.65 €153.80

-€18.08

TEXA License Update — Vendor part RIS.BIKE/1A

Unlock update for part number 38070682. Check for missing months before purchase. The license is non-returnable.

€58.82 €76.90

Reverse Brake Bleeder Tool — Single- and dual-disc, with or without ABS, Black

-€40.03

JIMS Reverse Brake Bleeder Tool — Single- and dual-disc, with or...

Innovative reverse bleeding method removes all air without pumping; pushes fresh fluid through the master cylinder, follows OEM ABS procedures, saves time and fluid, made in the U.S.A.

€186.76 €226.79

-€8.26

JIMS 25 mm Wheel Bearing Adapter — Black, Metric

Precision 25 mm adapter for Harley-Davidson® models from '07 to '19. Made in the USA.

€38.54 €46.80

-€11.40

JIMS Rear Axle Installation Guide Tool — JIMS, Rear Axle, Black

Tool for aligning rear wheel, caliper brackets, hubs and spacers on Big Twin models with hollow 1" (25 mm) standard axles. Made in the USA.

€53.24 €64.64

Primary Locking Bar — Primary (drive), Black

-€8.26

JIMS Primary Locking Bar — Primary (drive), Black

Immobilizes the primary drive; allows torque-wrench tightening or breaker-bar loosening; prevents rotor and magnet damage; made in the U.S.A.

€38.54 €46.80

-€18.04

BARNETT Clutch Spring Compression Tool — Black

Compresses diaphragm clutch springs for easy removal and reinstallation of retainer rings. Made in the USA.

€84.19 €102.23

-€9.92

BARNETT Clutch Spring Compression Tool — Black

Tool for removal and reinstallation of retainer rings on diaphragm clutches. Durable and compact for shop or home use. Made in the USA.

€46.27 €56.19

-€711.70
Out of Stock

TEXA Bike Diagnose TEXA TXB EVO — APB05.6-DEMO

Professional motorcycle diagnostic tool for quick fault reading, live data, and guided procedures.

€2,013.64 €2,725.34

-€345.41
Out of Stock

TEXA Cable Starter Pack — TEXA, S0493C-DEMO

Starter pack with a complete set of diagnostic and bike cables for major motorcycle brands, supplied in an organized carrying case.

€977.27 €1,322.68

-€32.08

JIMS M8 Shifter Shaft Bushing Remover & Installer — 5512, Black, Kit

Toolset for quick removal and precise installation of shifter shaft bushings to the correct depth.

€124.76 €156.84

Crankshaft Bearing Tool — Right, Crankcase, Black

-€56.62

JIMS Crankshaft Bearing Tool — Right, Crankcase, Black

Removes and installs right crankcase bearings without damaging the case.

€264.21 €320.83

-€18.54

JIMS Evolution Cylinder Stud Assembly Tool — Engine

Captive ball-bearing assembly tool set 1" from top for precise stud installs; fits all Evolution Big Twin and XL models. Made in the U.S.A.

€86.53 €105.07

-€14.67
Out of Stock

JIMS Primary Locking Bar — Front engine sprocket, Black

Immobilizes the primary drive for clutch and primary-drive service. Allows torque-wrench tightening or breaker-bar loosening. Made in the U.S.A.

€68.47 €83.14

-€25.17
Out of Stock

JIMS Cruise Drive Vise Stand — Black, Blue

Aligns transmission gears and shafts for safe, damage-free installation; speeds and simplifies assembly.

€117.51 €142.68

Traction Ladder — 208 cm (82"), 38 cm (15"), Black

-€23.88
Out of Stock

CALIBER Traction Ladder — 208 cm (82"), 38 cm (15"), Black

Rollout grip design delivers superior traction on iced surfaces; compact for easy storage and quick attachment.

€77.59 €101.47

-€7.24

JIMS Primary Cover Inspection Plug Tool — Black

Tool for removing and installing the primary inspection plug. Made in the USA.

€33.79 €41.03

Ramp Pro Loading Ramps — 90" L, 52" W, 1,500 lb capacity, Black

-€177.77
Out of Stock

CALIBER Ramp Pro Loading Ramps — 90" L, 52" W, 1,500 lb capacity, Black

Versatile folding loading ramps with integrated 11.5” LowPro Grip Glides for safe entry/exit, removable center section, and included Retrax strap for secure attachment.

€662.75 €840.52

-€11.20

JIMS Shifter Shaft Sleeve Tool — For 5-Speed Transmission, Black

Removes and installs shifter shaft sleeves, assemblies and drums. Made in the USA.

€52.24 €63.44

$Ramp Pro Loading Ramps — 229 cm (90\") length, 1360 kg (3000 lb) capacity$

-€227.92

CALIBER Ramp Pro Loading Ramps — 229 cm (90\") length, 1360 kg (3000...

Heavy-duty folding ramps with LowPro Grip Glides and removable center section for compact storage.

€825.78 €1,053.70

Main Drive Gear Bearing/Seal Installation Tool — Cruise Drive, 6-speed, Black

-€33.16

JIMS Main Drive Gear Bearing/Seal Installation Tool — Cruise Drive,...

Precision installer for main drive gear bearings and seal; prevents marring and seats components to correct depth using a one-ton press. Made in USA.

€154.75 €187.91

-€49.04

JIMS Transmission Door Puller — Blue

Removes transmission door with gears and shaft attached. Will not damage door bearings. Made in the USA.

€228.84 €277.88

-€341.43

JIMS Timken® Case Bearing Tool — Engine Case, Steel, Black, PN 959

Precision insert sleeve and complete installation hardware to restore case bearing fitment. Requires hand tools and a two-ton press. Timken bearing not included.

€1,593.32 €1,934.75

Balancer Shaft Removal Tool — Left side, engine case, Black

-€62.37

JIMS Balancer Shaft Removal Tool — Left side, engine case, Black

Removes front and rear counter‑balancer shaft bearing assemblies from the left engine case; fits 96" and 110" Beta® engines. Made in the U.S.A.

€291.06 €353.43

Bearing and Race Puller Tool — Pinion shaft, flywheel bearing race, Black

-€109.87
Out of Stock

JIMS Bearing and Race Puller Tool — Pinion shaft, flywheel bearing...

Precision tool for removing press-fit bearings and gears from motorcycle pinion and flywheel shafts. Multi-use and made in the U.S.A.

€427.30 €537.17

Sealed Wheel Bearing Removal/Installation Kit — 3/4", 1", 25 mm

-€99.11

JIMS Sealed Wheel Bearing Removal/Installation Kit — 3/4", 1", 25 mm

Removes and installs 3/4" , 1" and 25 mm sealed wheel bearings, with or without ABS. Made in the USA.

€462.52 €561.63

Starter Jackshaft Seal Installer Tool — Jackshaft, Black

-€35.09

JIMS Starter Jackshaft Seal Installer Tool — Jackshaft, Black

Installs the starter jackshaft seal without distortion; fits the seal in the upper part of the inner primary of Big Twins. Made in the U.S.A.

€163.76 €198.85

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company