TOOLS (6)

Compression Release Valve Installation Kit — Engine case fit

-€122.89

JIMS Compression Release Valve Installation Kit — Engine case fit

Complete kit to drill, spot face, tap and install compression release valves on front and rear heads; fits big-inch and high-compression Twin Cams.

€573.51 €696.40

-€63.43

JIMS Wrist Pin Bushing Reaming Tool — Wrist pin, 1726-1

Reams wrist pin bushings to the specified inner diameter. Can be used with rods in or out of the motor. Lead-in taper for easy use. Made in the U.S.A.

€296.01 €359.44

Inner Cam Bearing Go and No-Go Gauges — pair, silver

-€18.63

JIMS Inner Cam Bearing Go and No-Go Gauges — pair, silver

Fast, accurate Go/No‑Go gauges to check the inside diameter of inner cam bearings. Use them to confirm whether the cam will be too loose or too tight. Made in the U.S.A.

€86.94 €105.57

-€23.18

JIMS Fork Seal and Cap Installer — 41 mm fork tube, black

Installs fork and dust seals; lightly grease before use. Made in the U.S.A.

€108.19 €131.37

-€18.55

JIMS Fork Nut Socket — JIMS, Black

Removes and installs the top fork-tube plug; fits 41 mm forks. Made in the U.S.A.

€86.58 €105.13

Hardware Organizer M8 — Blue, powder-coated

-€23.94

JIMS Hardware Organizer M8 — Blue, powder-coated

Milwaukee Eight specific hardware index tools to store and organize bolts during disassembly. Can be placed on its side for Loctite application. Magnetic storage captures slip-fit dowels. Made in the USA.

€111.73 €135.67

Head Bolt Torque Gauge — Torque plate, head bolt application, blue

-€5.34

JIMS Head Bolt Torque Gauge — Torque plate, head bolt application,...

Accurate gauge for measuring 90° when tightening head bolts. Laser-engraved torquing sequence; fits Twin Cam and Evolution engines; made in the U.S.A.

€24.92 €30.26

-€83.06

JIMS Hardware Organizer M8 — Blue

Milwaukee Eight specific hardware index tools that store and organize bolts during disassembly. Side-mountable to aid Loctite application. Magnetic storage captures slip-fit dowels. Made in the USA.

€387.60 €470.66

-€45.07

JIMS Inner Cam Bearing Installation Tool — Right, Black

Presses inner cam bearings to the correct depth for accurate seating. Made in the U.S.A.

€210.33 €255.40

-€33.39

JIMS Clutch Spring Compressor Tool — Blue

Releases the clutch spring for easy retainer ring removal and installation. Made in the USA.

€155.85 €189.24

-€19.91

JIMS Clutch Spring Compressor Nut — Black

Tool for releasing the clutch spring; enables easy retainer ring removal and installation. Made in the USA.

€64.74 €84.65

-€28.57

JIMS Snap Ring Tool — Timken® bearing, black

Tool for removing and installing outer race snap rings on tapered roller bearings. Essential for OEM and aftermarket case ring replacements. Made in the U.S.A.

€133.33 €161.90

Tappet Block Alignment Tool — Crankcase, Black

-€6.17

JIMS Tappet Block Alignment Tool — Crankcase, Black

Precision tool for aligning the crankcase oil hole to the tappet block; also used for Evolution head rocker box bases and Harley-Davidson® Twin Cam oil pump alignment. Made in the U.S.A.

€28.76 €34.93

Transmission Shaft Installer — 5-Speed, Black

-€26.02

JIMS Transmission Shaft Installer — 5-Speed, Black

Installs shafts without the use of a hydraulic or arbor press. Made in the U.S.A.

€121.42 €147.44

-€20.41

JIMS Steering Head Bearing Race Installer — Black

Installs steering head bearing races and frame cups straight and without damage; made in the U.S.A.

€95.26 €115.67

-€87.73

JIMS Sprocket Shaft Bearing Remover — Sprocket shaft, Black

Removes Timken® bearings on late '86–'02 Big Twins; durable U.S.-made construction.

€341.16 €428.89

-€44.70

JIMS Main Drive Gear Bearing Removal Tool — 5-Speed, Blue, Silver

Removes old bearings straight without damaging the transmission case; usable without removing the transmission from the bike. Made in the U.S.A.

€208.65 €253.35

Driver Handle — Main drive gear, 5-speed, Blue anodized

-€29.26

JIMS Driver Handle — Main drive gear, 5-speed, Blue anodized

Installs main drive gear oil seal to correct depth with transmission assembled; includes protective sleeve; made in the U.S.A.

€136.58 €165.84

Tappet Oil Filter Screw Plug Tool — Black

-€8.79

JIMS Tappet Oil Filter Screw Plug Tool — Black

Removes tappet oil screen without removing the exhaust. Used to extract the tappet oil screen plug. Made in the U.S.A.

€41.05 €49.84

Shouldered Valve Guide Driver Set — 3/8", 1/32", 5/16" set, black/silver/yellow

-€13.18

JIMS Shouldered Valve Guide Driver Set — 3/8", 1/32", 5/16" set,...

Three-piece shouldered valve guide driver set (3/8", 1/32", 5/16") for guide removal and installation; made in the U.S.A.

€61.48 €74.66

-€36.49

JIMS Electronic Speedometer Sensor — Electronic, Speedometer

Top-quality replacement electronic speedometer sensor. Includes O-ring, hardware and OEM connector. Fits aftermarket transmission cases with a speedometer sensor hole.

€170.28 €206.77

-€13.41

BIKE LIFT Magnetic Soft Jaws Vice — Black, White

Magnetic soft jaws protect workpieces and provide a secure, non-marring grip for bench vices.

€62.59 €76.00

-€16.31

JIMS Thread Tapping Tool — JIMS 1169-1, Valve assembly

Precision tool for tapping threads; compatible with compression release valve installation kits. Made in USA.

€46.16 €62.47

Replacement Parts For Rk Chain Breaker/Press Fit Tool — fits clip and rivet master links, black

-€2.20

RK Replacement Parts For Rk Chain Breaker/Press Fit Tool — fits...

Replacement parts for chain breaker and press-fit tool with a small pressure bolt.

€7.84 €10.04

Replacement Parts For Rk Chain Breaker/Press Fit Tool — Clip, Rivet, Black

-€2.20

RK Replacement Parts For Rk Chain Breaker/Press Fit Tool — Clip,...

Small pressure bolt for precise pressing action.

Compact replacement parts for quick maintenance and repair.

€7.84 €10.04

-€4.05

RK Small Pressure Bolt — for clip and rivet, black

Replacement pressure component for chain breaker and press-fit tools that supplies controlled, consistent pressure for master link work.

€14.35 €18.40

Replacement Parts For Rk Chain Breaker/Press Fit Tool — clip and rivet, black

-€2.20

RK Replacement Parts For Rk Chain Breaker/Press Fit Tool — clip...

Durable replacement part featuring a small pressure bolt for precise pin cutting and pressing.

€7.84 €10.04

Replacement Parts for RK Chain Breaker/Press Fit Tool — Cutting pin, clip/rivet fitment

-€2.20

RK Replacement Parts for RK Chain Breaker/Press Fit Tool —...

Replacement part for chain breaker and press-fit tools. Small pressure bolt for controlled force.

€7.84 €10.04

Chain Tool Kit — Black, Red, UCT2100(50)

-€21.11

RK Chain Tool Kit — Black, Red, UCT2100(50)

Complete chain tool kit for pressing, riveting, flaring, cutting and breaking 40 & 50 type chains. Includes pins, holder plates and pressure bolts. Not compatible with 530PRODR; 420/428 rivet requires additional parts.

€74.75 €95.86

Replacement Parts For Rk Chain Breaker/Press Fit Tool — Black, clip, rivet

-€4.05

RK Replacement Parts For Rk Chain Breaker/Press Fit Tool — Black,...

Replacement small pressure bolt for RK chain breaker/press-fit tools.

€14.35 €18.40

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS