TOOLS (5)

Heavy-Duty Pin Spanner — 10.5–150 mm span, 94.91 Nm, black oxide

-€32.07

MOTION PRO Heavy-Duty Pin Spanner — 10.5–150 mm span, 94.91 Nm, black oxide

Fits shock reservoirs, seal heads, fork caps, and bearing retainers
Heat-treated billet construction for strength
Integrated 3/8" square drive
Interchangeable 3 mm, 4 mm, 5 mm pins
Pivoting arms: 10.5–150 mm span
Max torque: 94.91 Nm / 70 lb/ft

€90.65 €122.72

Replacement Pins for Heavy-Duty Pin Spanner — Set, Black Oxide, Steel

-€4.43

MOTION PRO Replacement Pins for Heavy-Duty Pin Spanner — Set, Black...

Set of replacement pins for heavy-duty pin spanner — two 3 mm, two 4 mm, two 5 mm.

€12.53 €16.96

Steering Head Race Puller — Black anodized

-€16.61

MOTION PRO Steering Head Race Puller — Black anodized

Removes outer steering head bearing races quickly and without a hammer; fits tapered races OD 47–55 mm, ID 37.5–45 mm.

€69.38 €85.99

-€12.27

MOTION PRO Tuff Hook™ — Black

Flexible shaft tool for removing and installing large exhaust and kickstand springs; locking slider lets the shaft be rigid or flex.

€47.72 €59.99

Swingarm/Rising Rate Linkage Bearing Install Tool — ID20/OD26 mm, ID21/OD26 mm, ID22/OD27 mm, 200 mm bolt, Black

-€10.23

MOTION PRO Swingarm/Rising Rate Linkage Bearing Install Tool — ID20/OD26...

Three-driver kit for installing swingarm and rising-rate linkage bearings on late-model Japanese off-road motorcycles.

€28.92 €39.15

-€13.22

MOTION PRO Pro Funnel™ — White

800 cc (26 oz) capacity funnel with premix ratio graduations, reduced-neck drip prevention, integrated shutoff valve, adjustable ball-pivot spout and magnetic storage.

€37.38 €50.60

-€6.69

MOTION PRO Snap Ring Pliers — Black, Red

Economical snap ring pliers that handle inside and outside rings; includes three extra tip sets for tight access.

€18.90 €25.59

-€5.17

MOTION PRO CR Bearing Retainer Tool — 44 mm, 22 mm hex, 3/8" drive, Silver

Tool for removing and replacing rear wheel bearing retainer rings with a 44 mm fit and multiple drive options.

€14.64 €19.81

90° Carb Tool with Bits — 44.5 cm (17.5"), Silver

-€21.59

MOTION PRO 90° Carb Tool with Bits — 44.5 cm (17.5"), Silver

Right-angle tool with five 1/4" hex bits; detent handle with laser-etched index; fits 1/4" or 6 mm hex bits; replaceable gears; max torque 50 lb/in.

€61.01 €82.60

-€7.39

MOTION PRO Master Link Clip Pliers — Master Link, Red, Silver

Notched short tip seats on the pin while the longer tip presses the clip for quick installation and removal.

€20.90 €28.29

-€5.34

MOTION PRO Oil Filter Strap Wrench — Oil Filter, Black

Strap wrench for spin-on oil filters; fits filters up to 125 mm (5"). Use with a 3/8" drive ratchet or extension.

€11.44 €16.78

Flywheel Puller Right Hand External Thread — M22 x 1.5, black oxide

-€3.10

MOTION PRO Flywheel Puller Right Hand External Thread — M22 x 1.5, black...

Right-hand threaded puller for removing flywheels or rotors; heat treated, durable finish, lifetime limited warranty.

€8.77 €11.87

-€5.97

MOTION PRO Damping Rod Holder — 10–14 mm, Blue anodized

Secures the damping rod for inner fork cartridge removal; fits 10–14 mm rods; laser engraved; lifetime limited warranty.

€16.88 €22.85

Flywheel Puller Right Hand External Thread — M20 x 1.5, black oxide

-€3.42

MOTION PRO Flywheel Puller Right Hand External Thread — M20 x 1.5, black...

Compact flywheel puller designed for safe, reliable removal of flywheels and rotors; heat treated and laser marked.

€9.67 €13.09

-€4.14

MOTION PRO Flywheel Puller External Thread Hollow — M20 x 1.5, black oxide

Heat-treated puller for safe flywheel or rotor removal. Laser etched with Motion Pro logo and part number. Lifetime limited warranty.

€11.69 €15.83

-€2.22

MOTION PRO Wheel Tools — T-handle, female hex, metric, silver

Innovative tools to maintain and repair motorcycles, ATVs and UTVs.

€6.26 €8.48

$Timing Plug Wrench — 16 mm (5/8\"), 22 mm (7/8\"), 38 mm (1-1/2\"), Silver$

-€7.12

MOTION PRO Timing Plug Wrench — 16 mm (5/8\"), 22 mm (7/8\"), 38 mm...

Fits straight-slot timing plugs on most motorcycles and ATVs. Includes 16 mm (5/8\"), 22 mm (7/8\"), and 38 mm (1-1/2\") blades.

€20.10 €27.22

-€4.74

MOTION PRO Engine Timing Degree Wheel — 171.5 mm (6-3/4") , Blue anodized

Precision degree wheel for checking and setting ignition and cam timing.

€13.36 €18.10

-€5.29

MOTION PRO Torque Wrench Adapter — MOTION PRO, Cylinder, Nickel Pewter

Extends the reach of 3/8" drive torque wrenches by 3"; fits 12 mm and 14 mm nuts and bolts. Check the owner's manual for proper torque specifications.

€14.97 €20.26

-€12.67

MOTION PRO Ratchet Spark Plug Wrench — 13/16" plug, 2-stroke, silver

Compact ratcheting spark plug wrench for tight spaces on many water-cooled 2-stroke engines; fits standard 13/16" plugs.

€16.68 €29.35

Oil Filter and Clutch Hub Spanner — 24 mm, 3/8" driver

-€2.80

MOTION PRO Oil Filter and Clutch Hub Spanner — 24 mm, 3/8" driver

Heat-treated steel tool with 24 mm inside diameter; fits 3/8" drive tools for many Honda single- and twin-cylinder models.

€7.90 €10.70

-€4.74

MOTION PRO Valve Shim Tools — For Suzuki models, Silver

Holds valve spring bucket down for safe shim removal; for adjusting valve clearance on twin cam models; hardened alloy construction.

€13.36 €18.10

-€4.74

MOTION PRO Valve Shim Tools — Silver, Alloy steel

Holds valve spring bucket down for shim removal; fits twin cam valve adjustments; hardened alloy steel construction.

€13.36 €18.10

Flywheel Puller Left Hand External Thread — M27 x 1.0, Black oxide

-€4.43

MOTION PRO Flywheel Puller Left Hand External Thread — M27 x 1.0, Black...

Left-hand external-thread flywheel puller for safe, controlled removal. Laser etched, heat treated, durable finish, lifetime limited warranty.

€12.53 €16.96

Flywheel Puller Right Hand External Thread — M16 x 1.5, Black oxide

-€2.52

MOTION PRO Flywheel Puller Right Hand External Thread — M16 x 1.5, Black...

Tool for removing flywheels and rotors; heat treated, laser marked, and backed by a lifetime limited warranty.

€7.11 €9.63

-€3.85

MOTION PRO Valve Shim Tools — For Yamaha models, Black

Holds valve spring bucket down for shim removal; for adjusting valve clearance on twin cam models; hardened alloy steel.

€10.85 €14.70

-€2.81

MOTION PRO Valve Shim Tools — For Kawasaki models, black

Holds valve spring bucket down for safe shim removal; designed for twin cam valve clearance adjustment.

€7.95 €10.76

Fork Cap Hex Tool for Harley Davidson — 49 mm, 1/2" square drive, blue anodized

-€3.89

MOTION PRO Fork Cap Hex Tool for Harley Davidson — 49 mm, 1/2" square...

Tool for safe removal and installation of fork caps on Harley Davidson touring models. Protective O-ring, machined construction with laser markings, fits 1/2" square drive.

€15.10 €18.99

Fork Cap Socket 41 mm — 1/2" square drive, Blue anodized, for '48 and later Wide Glide models

-€3.27

MOTION PRO Fork Cap Socket 41 mm — 1/2" square drive, Blue anodized, for...

Tool for safe removal and installation of fork caps; reduces risk of damage. Fits '48 and later Wide Glide models. 1/2" square drive.

€12.72 €15.99

-€5.93

MOTION PRO ShockSetter — 12 mm, Blue

Combines high-speed and low-speed/rebound adjusters into one compact tool.

Portable for trackside or trailside adjustments.

Quickly adjusts rear shock compression and rebound.

Fits common high-speed compression adjusters.

€23.06 €28.99

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS