TOOLS (5)

-€6.47

WERA Insulated Nutdriver — 12 mm, Orange

VDE-insulated blades rated to 1000 V
Kraftform multi-component handle for speed and torque
Handle markings for quick identification
Hexagonal anti-roll feature
Zinc phosphate plated finish

€15.84 €22.31

-€7.29

WERA Insulated Nutdriver — 13 mm, Orange, Red

VDE-insulated nutdriver rated for 1000 volts with ergonomic grip zones, anti-roll feature and corrosion-resistant plating.

€17.80 €25.09

Insulated adj. Torque handle — Torque wrench, Adjustable, Orange, Red

-€32.42

WERA Insulated adj. Torque handle — Torque wrench, Adjustable,...

Adjustable insulated torque handle. Torque range 0.3–1.2. Audible and tactile signal at preset torque. Fits Kraftform Kompakt VDE blades; quick blade change.

€79.24 €111.66

-€8.28

MOTION PRO Fork Cap Wrench — 50 mm fork cap, 14 mm slot, blue anodized

Removes the fork cap on dual-chamber closed-cartridge forks. CNC machined for precise fit and tolerance. Laser engraved markings. Original Motion Pro design.

€23.40 €31.68

BPF Rod Guide Wrench — BPF rod, black oxide

-€21.59

MOTION PRO BPF Rod Guide Wrench — BPF rod, black oxide

Removes the internal rod guide on Showa BPF 41 mm and 43 mm forks. The 43 mm side replaces Honda OEM tool 070MB-MGPA100, Kawasaki 57001-1758 and Suzuki 09940-84710; the 41 mm side replaces Honda 070MB-MCJ0100, Kawasaki 57001-1742 and Suzuki 09910-84711.

€61.01 €82.60

American V-Twin Steering Race Tool — Blue anodized, fits most Harley Davidson Dyna's, FXR's and early Baggers

-€30.45

MOTION PRO American V-Twin Steering Race Tool — Blue anodized, fits most...

2-in-1 puller and driver for safe removal and installation of steering bearing races; fits most Harley Davidson Dyna's, FXR's, and early Baggers.

€86.03 €116.48

Fork Seal Bullet Set — 36, 41, 43, 45, 46, 47, 48, 49 mm

-€8.14

MOTION PRO Fork Seal Bullet Set — 36, 41, 43, 45, 46, 47, 48, 49 mm

Protects fork seal and wiper during installation. Set includes bullets marked 36–49 mm for easy identification.

€22.99 €31.13

Shock Bearing Puller — Fits 24 mm OD bearings, Black oxide

-€9.16

MOTION PRO Shock Bearing Puller — Fits 24 mm OD bearings, Black oxide

Reversible puller cup with cutaway fits many shock reservoir and compression adjuster configurations. Safely removes and installs upper spherical bearings. Corrosion resistant black oxide coating. Hardened steel construction with brass thrust washer. Fits 24 mm OD bearings.

€25.90 €35.06

-€12.29

MOTION PRO Pro Seal Puller™ — Blue anodized

Precision puller with three interchangeable tips for safe, easy seal removal and a knurled handle for secure grip.

€34.70 €46.99

WP Shock Clevis Jam Nut Socket — 08-0730, Black oxide

-€7.69

MOTION PRO WP Shock Clevis Jam Nut Socket — 08-0730, Black oxide

Open-end design for clevis removal and rebound adjuster service without shock disassembly. Fits oval-profile clevis jam nuts found on WP shocks. Heat-treated, durable construction.

€21.73 €29.42

-€1.48

MOTION PRO Fork Seal Bullet Set — 41 mm, Blue

Protects fork seals and wipers; set of eight marked bullets (36–49 mm) for inverted forks.

€4.17 €5.65

Fork Cap Socket — 43 mm, 45 mm, fits WP 4860 4CS ('13-'14 Husaberg, '14 KTM XC), Blue

-€6.79

MOTION PRO Fork Cap Socket — 43 mm, 45 mm, fits WP 4860 4CS ('13-'14...

Tool for removing and installing left and right adjustable fork caps; enables correct torque and secure assembly.

€19.22 €26.01

Heavy-Duty Pin Spanner — 10.5–150 mm span, 94.91 Nm, black oxide

-€32.07

MOTION PRO Heavy-Duty Pin Spanner — 10.5–150 mm span, 94.91 Nm, black oxide

Fits shock reservoirs, seal heads, fork caps, and bearing retainers
Heat-treated billet construction for strength
Integrated 3/8" square drive
Interchangeable 3 mm, 4 mm, 5 mm pins
Pivoting arms: 10.5–150 mm span
Max torque: 94.91 Nm / 70 lb/ft

€90.65 €122.72

Replacement Pins for Heavy-Duty Pin Spanner — Set, Black Oxide, Steel

-€4.43

MOTION PRO Replacement Pins for Heavy-Duty Pin Spanner — Set, Black...

Set of replacement pins for heavy-duty pin spanner — two 3 mm, two 4 mm, two 5 mm.

€12.53 €16.96

Steering Head Race Puller — Black anodized

-€16.61

MOTION PRO Steering Head Race Puller — Black anodized

Removes outer steering head bearing races quickly and without a hammer; fits tapered races OD 47–55 mm, ID 37.5–45 mm.

€69.38 €85.99

-€12.27

MOTION PRO Tuff Hook™ — Black

Flexible shaft tool for removing and installing large exhaust and kickstand springs; locking slider lets the shaft be rigid or flex.

€47.72 €59.99

Swingarm/Rising Rate Linkage Bearing Install Tool — ID20/OD26 mm, ID21/OD26 mm, ID22/OD27 mm, 200 mm bolt, Black

-€10.23

MOTION PRO Swingarm/Rising Rate Linkage Bearing Install Tool — ID20/OD26...

Three-driver kit for installing swingarm and rising-rate linkage bearings on late-model Japanese off-road motorcycles.

€28.92 €39.15

-€13.22

MOTION PRO Pro Funnel™ — White

800 cc (26 oz) capacity funnel with premix ratio graduations, reduced-neck drip prevention, integrated shutoff valve, adjustable ball-pivot spout and magnetic storage.

€37.38 €50.60

-€6.69

MOTION PRO Snap Ring Pliers — Black, Red

Economical snap ring pliers that handle inside and outside rings; includes three extra tip sets for tight access.

€18.90 €25.59

-€5.17

MOTION PRO CR Bearing Retainer Tool — 44 mm, 22 mm hex, 3/8" drive, Silver

Tool for removing and replacing rear wheel bearing retainer rings with a 44 mm fit and multiple drive options.

€14.64 €19.81

90° Carb Tool with Bits — 44.5 cm (17.5"), Silver

-€21.59

MOTION PRO 90° Carb Tool with Bits — 44.5 cm (17.5"), Silver

Right-angle tool with five 1/4" hex bits; detent handle with laser-etched index; fits 1/4" or 6 mm hex bits; replaceable gears; max torque 50 lb/in.

€61.01 €82.60

-€7.39

MOTION PRO Master Link Clip Pliers — Master Link, Red, Silver

Notched short tip seats on the pin while the longer tip presses the clip for quick installation and removal.

€20.90 €28.29

-€5.34

MOTION PRO Oil Filter Strap Wrench — Oil Filter, Black

Strap wrench for spin-on oil filters; fits filters up to 125 mm (5"). Use with a 3/8" drive ratchet or extension.

€11.44 €16.78

Flywheel Puller Right Hand External Thread — M22 x 1.5, black oxide

-€3.10

MOTION PRO Flywheel Puller Right Hand External Thread — M22 x 1.5, black...

Right-hand threaded puller for removing flywheels or rotors; heat treated, durable finish, lifetime limited warranty.

€8.77 €11.87

-€5.97

MOTION PRO Damping Rod Holder — 10–14 mm, Blue anodized

Secures the damping rod for inner fork cartridge removal; fits 10–14 mm rods; laser engraved; lifetime limited warranty.

€16.88 €22.85

Flywheel Puller Right Hand External Thread — M20 x 1.5, black oxide

-€3.42

MOTION PRO Flywheel Puller Right Hand External Thread — M20 x 1.5, black...

Compact flywheel puller designed for safe, reliable removal of flywheels and rotors; heat treated and laser marked.

€9.67 €13.09

-€4.14

MOTION PRO Flywheel Puller External Thread Hollow — M20 x 1.5, black oxide

Heat-treated puller for safe flywheel or rotor removal. Laser etched with Motion Pro logo and part number. Lifetime limited warranty.

€11.69 €15.83

-€2.22

MOTION PRO Wheel Tools — T-handle, female hex, metric, silver

Innovative tools to maintain and repair motorcycles, ATVs and UTVs.

€6.26 €8.48

$Timing Plug Wrench — 16 mm (5/8\"), 22 mm (7/8\"), 38 mm (1-1/2\"), Silver$

-€7.12

MOTION PRO Timing Plug Wrench — 16 mm (5/8\"), 22 mm (7/8\"), 38 mm...

Fits straight-slot timing plugs on most motorcycles and ATVs. Includes 16 mm (5/8\"), 22 mm (7/8\"), and 38 mm (1-1/2\") blades.

€20.10 €27.22

-€4.74

MOTION PRO Engine Timing Degree Wheel — 171.5 mm (6-3/4") , Blue anodized

Precision degree wheel for checking and setting ignition and cam timing.

€13.36 €18.10

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company