TOOLS (5)

Exhaust Spring Puller Tool — T-handle, Black

-€2.73

FMF Exhaust Spring Puller Tool — T-handle, Black

T-handle spring puller that lets mechanics remove exhaust springs quickly and safely.

€12.28 €15.01

-€31.95

REGINA Compact Chain Assembly and Rivet Tool — 5/8", 520/525/530, Black

Single-tool solution for chain assembly and four-sided riveting. Durable hardened construction. Made in Italy.

€41.91 €73.86

Regina Professional Chain Assembly Tool — roller chain, master link clip or rivet

-€2.06

REGINA Regina Professional Chain Assembly Tool — roller chain, master...

Professional assembly tool set for sealed chains. Works with press-fit and rivet links. Includes 1/2" and 5/8" tools. Made in Italy.

€3.23 €5.29

Regina Professional Chain Assembly Tool — 1/2" (420, 428), 5/8" (520, 530)

-€18.06

REGINA Regina Professional Chain Assembly Tool — 1/2" (420, 428),...

Professional tool for assembling sealed chains; fits 420/428 (1/2") and 520/530 (5/8"). Made in Italy.

€54.97 €73.03

Regina Professional Chain Assembly Tool — Roller chain, rivet connector, steel

-€109.79

REGINA Regina Professional Chain Assembly Tool — Roller chain, rivet...

Professional assembly tool for sealed chains. Works with press-fit and rivet links. Sizes: 1/2" for 420/428, 5/8" for 520/530. Made in Italy.

€333.91 €443.70

-€17.15

REGINA Regina Professional Chain Assembly Tool — 1/2" (420, 428),...

Professional assembly tool for Regina sealed chains. 1/2" for 420–428 and 5/8" for 520–530. Made in Italy.

€52.17 €69.32

Regina Compact 5/8" Chain Assembly And Rivet Tool — Roller chain, Steel, Specialty tool

-€8.06

REGINA Regina Compact 5/8" Chain Assembly And Rivet Tool — Roller...

Compact single-tool solution for assembling and four-sided riveting of Regina 520/525/530 O- and Z-ring chains. Affordable alternative to two-piece tools; made in Italy.

€10.77 €18.83

-€29.80

JIMS Ignition Switch Housing Alignment Tool — Blue

Aligns ignition switch housing while tightening screws and positions the switch for proper fork lock engagement.

€115.91 €145.71

-€11.26

JIMS O² Sensor Tool Drive Receiver/Wrench — 3/8" drive, Silver

Socket accepts 3/8" drive or 7/8" wrench; removes and installs oxygen sensors on fuel-injected models; rated to 125 ft-lbs; made in the USA.

€43.80 €55.06

-€19.01

JIMS Ignition Switch Fork Lock Tool — Fork lock, Black

Locates on ignition switch face nut to hold switch for removal or installation. 3/8" drive access hole. Made in the USA.

€73.93 €92.94

Multimeter Volt Probe Kit — JIMS Kit, Black, Blue, Green, Red, Yellow

-€24.75

JIMS Multimeter Volt Probe Kit — JIMS Kit, Black, Blue, Green, Red,...

Color‑coded, fully insulated probes with 180°, 45°, 90° options and 4 mm banana plugs for safe, precise diagnostics.

€96.26 €121.01

Ignition Switch Housing Alignment Tool — Vendor Part Number 944, Blue

-€29.85

JIMS Ignition Switch Housing Alignment Tool — Vendor Part Number...

Aligns the ignition switch housing during screw torquing to ensure correct switch orientation and longer housing life.

€116.08 €145.93

-€14.87

JIMS Battery Lifter — 5501, Silver

Modeled after larger automotive battery tools but sized for Harley-Davidson® models; easily lifts batteries with extremely tight fits. Made in the USA.

€57.83 €72.70

-€163.88

DAYTONA TWIN TEC LLC Twin Scan 4 Diagnostic Kit — 3.2" L x 2.2" W x 1" H, CAN Bus

Professional motorcycle diagnostic kit with ECM programming, DTC read/clear, key fob reprogramming, stand-alone data logging, analog inputs and scopemeter capability.

€637.33 €801.21

Reverse Brake Bleeder Tool — Single- and dual-disc, with or without ABS, Black

-€46.39

JIMS Reverse Brake Bleeder Tool — Single- and dual-disc, with or...

Innovative reverse bleeding method removes all air without pumping; pushes fresh fluid through the master cylinder, follows OEM ABS procedures, saves time and fluid, made in the U.S.A.

€180.40 €226.79

-€9.57

JIMS 25 mm Wheel Bearing Adapter — Black, Metric

Precision 25 mm adapter for Harley-Davidson® models from '07 to '19. Made in the USA.

€37.23 €46.80

-€13.22

JIMS Rear Axle Installation Guide Tool — JIMS, Rear Axle, Black

Tool for aligning rear wheel, caliper brackets, hubs and spacers on Big Twin models with hollow 1" (25 mm) standard axles. Made in the USA.

€51.42 €64.64

Primary Locking Bar — Primary Belt Drive, Primary Chain Drive, Black

-€9.57

JIMS Primary Locking Bar — Primary Belt Drive, Primary Chain Drive,...

Immobilizes the primary drive for safe tightening and loosening during maintenance. Prevents rotor and magnet damage.

€37.23 €46.80

Primary Locking Bar — Primary (drive), Black

-€9.57

JIMS Primary Locking Bar — Primary (drive), Black

Immobilizes the primary drive; allows torque-wrench tightening or breaker-bar loosening; prevents rotor and magnet damage; made in the U.S.A.

€37.23 €46.80

-€56.96

REGINA Type 7 Chain Breaker — 1/2", 5/8", 3/4" pitch, Black

Precision tool that supports outer plates for complete pin removal; fits 1/2", 5/8" and 3/4" pitch chains, including O-ring types.

€74.65 €131.61

Type 7 Chain Breaker Replacement Pin — 1/2" pitch, 5/8" pitch, 3/4" pitch

-€5.53

REGINA Type 7 Chain Breaker Replacement Pin — 1/2" pitch, 5/8" pitch,...

Replacement pin for chain breakers. Fits 1/2", 5/8" and 3/4" pitch chains.

€7.25 €12.78

-€32.08
New

JIMS M8 Shifter Shaft Bushing Remover & Installer — 5512, Black, Kit

Toolset for quick removal and precise installation of shifter shaft bushings to the correct depth.

€124.76 €156.84

Crankshaft Bearing Tool — Right, Crankcase, Black

-€65.63
Out of Stock

JIMS Crankshaft Bearing Tool — Right, Crankcase, Black

Removes and installs right crankcase bearings without damaging the case.

€255.20 €320.83

-€21.49
Out of Stock

JIMS Evolution Cylinder Stud Assembly Tool — Engine

Captive ball-bearing assembly tool set 1" from top for precise stud installs; fits all Evolution Big Twin and XL models. Made in the U.S.A.

€83.58 €105.07

-€17.00
Out of Stock

JIMS Primary Locking Bar — Front engine sprocket, Black

Immobilizes the primary drive for clutch and primary-drive service. Allows torque-wrench tightening or breaker-bar loosening. Made in the U.S.A.

€66.14 €83.14

-€29.18
Out of Stock

JIMS Cruise Drive Vise Stand — Black, Blue

Aligns transmission gears and shafts for safe, damage-free installation; speeds and simplifies assembly.

€113.50 €142.68

-€12.99
Out of Stock

JIMS Shifter Shaft Sleeve Tool — For 5-Speed Transmission, Black

Removes and installs shifter shaft sleeves, assemblies and drums. Made in the USA.

€50.45 €63.44

Main Drive Gear Bearing/Seal Installation Tool — Cruise Drive, 6-speed, Black

-€38.43
Out of Stock

JIMS Main Drive Gear Bearing/Seal Installation Tool — Cruise Drive,...

Precision installer for main drive gear bearings and seal; prevents marring and seats components to correct depth using a one-ton press. Made in USA.

€149.48 €187.91

-€56.85
Out of Stock

JIMS Transmission Door Puller — Blue

Removes transmission door with gears and shaft attached. Will not damage door bearings. Made in the USA.

€221.03 €277.88

-€395.75
Out of Stock

JIMS Timken® Case Bearing Tool — Engine Case, Steel, Black, PN 959

Precision insert sleeve and complete installation hardware to restore case bearing fitment. Requires hand tools and a two-ton press. Timken bearing not included.

€1,539.00 €1,934.75

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS