TOOLS (5)

-€34.40

TECMATE OptiMate Pro-1 DUO — 12V, 10A, Black

Professional charger-tester and power supply for workshop and field use; three modes for lead-acid and LiFePO4, smart recovery and BMS reset.

€160.52 €194.92

OptiMate™ Monitor — DIN plug, SAE plug, Black

-€5.62

TECMATE OptiMate™ Monitor — DIN plug, SAE plug, Black

SAE to DIN/AUTO 12 V adapter with LED state-of-charge monitor; fits 21 mm AUTO and 12 mm DIN sockets; weatherproof sealing cap; supports AGM and LFP; operates to -40°C/-40°F; two automatic modes.

€13.51 €19.13

$OptiMate™ Battery to USB-C Charger — 12V, 5V, 203 cm (80\")$

-€9.30

TECMATE OptiMate™ Battery to USB-C Charger — 12V, 5V, 203 cm (80\")

Onboard charger and monitor for charging devices and protecting your parked battery.

€22.33 €31.63

-€1.70

TECMATE OptiMate Swivelling Charger HOOK — Black, fits OptiMate chargers

Swivelling mount to hang your OptiMate charger on handlebars, struts or cables; velcro included for neat wire management.

€4.09 €5.79

-€7.83

TECMATE OptiMate USB O-119 — 3300 mA, 5 V, Blue

Weatherproof portable dual USB charger with in-line 180° BIKE plug for BMW, Triumph and Ducati Multistrada. Fast, safe charging for USB‑A and USB‑C devices with automatic one-hour shutoff to protect the vehicle battery.

€18.80 €26.63

-€3.42

TECMATE OptiMate CABLE O-49 — 24V, Black

SAE to XLR 3-pin adapter cable for 24V battery charging. Length 30 cm / 12". Rubber in-line seal, thicker insulation, 10 A avg / 13 A max.

€8.21 €11.63

-€7.83

TECMATE OptiMate USB O-114 — 5 V, 3.3 A, Blue

Portable dual-output USB charger with USB-A and USB-C and a 90° DIN BIKE plug for BMW and Triumph. Built-in one-hour safety shutoff to prevent draining a parked vehicle battery.

€18.80 €26.63

-€88.23

TECMATE OptiMate Pro-4 DUO — 4 charging banks, 12V 5A

Automatic diagnostic charger for four batteries with independent banks; activates new batteries, saves deeply discharged units, and runs state‑of‑health tests. Replaceable output cords and service‑oriented design.

€411.69 €499.92

-€18.04

BARNETT Clutch Spring Compression Tool — Black

Compresses diaphragm clutch springs for easy removal and reinstallation of retainer rings. Made in the USA.

€84.19 €102.23

-€9.92

BARNETT Clutch Spring Compression Tool — Black

Tool for removal and reinstallation of retainer rings on diaphragm clutches. Durable and compact for shop or home use. Made in the USA.

€46.27 €56.19

OptiMate™ Magnetic Clip Connection — 75 cm (30"), 12V, 10 A (13 A max)

-€13.46

TECMATE OptiMate™ Magnetic Clip Connection — 75 cm (30"), 12V, 10 A...

Short-circuit proof MagCode magnetic clip with 28" nylon-sleeved 16 AWG cable and SAE connector; 75 cm (30") length, 10 A (13 A max), rated for outdoor and low-temperature use.

€32.33 €45.79

OptiMate™ Magnetic Port Connection — 101.5 cm (40") cable, 12 V, eyelet connector

-€16.40

TECMATE OptiMate™ Magnetic Port Connection — 101.5 cm (40") cable, 12...

Short-circuit proof magnetic connection with sealing cap and weather-rated insulation for dependable outdoor use.

€39.39 €55.79

Out of Stock

TECMATE OptiMate Cable O-31 Charging Cable

The OptiMate Cable O-31 Charging Cable ensures a reliable weatherproof connection for lithium batteries in powersport vehicles, designed for optimal performance in outdoor conditions.

€83.97

-€13.22
Out of Stock

PSR Fork Tube Tie-Down — 60 mm (2.4 in) I.D., anodized

Patented clamp for tie-down anchoring on most MX upside-down forks; rubber insert protects fork; 60 mm I.D.; pair.

€51.39 €64.61

Tie-Down Clamp — 25.4 mm (1"), pair, anodized

-€12.21

PSR Tie-Down Clamp — 25.4 mm (1"), pair, anodized

Instant anchor points for most powersport vehicles. Oval opening fits single or double hooks. Rubber insert protects fork surfaces.

€56.98 €69.19

Tie-Down Clamp — 38.1 mm (1-1/2 in), Anodized

-€12.21

PSR Tie-Down Clamp — 38.1 mm (1-1/2 in), Anodized

Instant anchor points for tie-downs on most powersport vehicles. Oval opening for single or double hooks; rubber insert protects fork surfaces.

€56.98 €69.19

Replacement Pin for Mario™ Single-Sided Stand — 21.7 mm (0.85"), bronze, fits Ducati (except 1098)

-€9.08
Out of Stock

PSR Replacement Pin for Mario™ Single-Sided Stand — 21.7 mm...

Replacement pin for single-sided rear stands. Sold individually. Verify fitment before purchase.

€35.33 €44.41

Big Mike Triple Tree Stand Pins — 19 mm (0.75") pin diameter, front

-€3.49
Out of Stock

PSR Big Mike Triple Tree Stand Pins — 19 mm (0.75") pin diameter,...

Model-specific triple tree pins; order by steering stem hole size. Intended for use with front stands.

€13.53 €17.02

-€3.49
Out of Stock

PSR Big Mike Triple Tree Stand Pins — 13 mm, front, zinc

Model-specific triple tree pins ordered by steering stem hole size; fit compatible lifting stands for front-end maintenance.

€13.53 €17.02

-€3.49
Out of Stock

PSR Big Mike Triple Tree Stand Pins — 16.75 mm pin, Front, Zinc

Pins for use with front stands. Order by steering stem hole size. Model-specific fit for triple tree setups.

€13.53 €17.02

Big Mike Triple Tree Stand Pins — 15.7 mm pin diameter, front mount

-€3.49
Out of Stock

PSR Big Mike Triple Tree Stand Pins — 15.7 mm pin diameter, front...

Model-specific triple tree stand pins ordered to match steering stem hole size for use with front stands.

€13.53 €17.02

-€3.49
Out of Stock

PSR Big Mike Triple Tree Stand Pins — 19 mm (0.75"), front, zinc

Model-specific triple tree pins for use with compatible lifting stands. Order by steering stem hole size.

€13.53 €17.02

-€3.49
Out of Stock

PSR Big Mike Triple Tree Stand Pins — 22 mm (0.87"), Front, Zinc

Model-specific triple tree pins for use with front stands. Order by steering stem hole size.

€13.53 €17.02

-€14.23
Out of Stock

PSR Econo Front Stand — Universal, White, powder-coated

Universal front stand for conventional forks with sturdy mild-steel construction for dependable support.

€55.33 €69.56

-€5.33

PSR Optional Non-Spool Hardware — Black finish

Optional hardware for supporting motorcycles during maintenance; works without spools.

€20.73 €26.06

Triple Tree Converter — adapter, PSR® Econo Stand, white powder-coated

-€14.68
Out of Stock

PSR Triple Tree Converter — adapter, PSR® Econo Stand, white...

Essential tool for removing and servicing forks, removing the front wheel, or replacing front brake pads and rotors. Lifts the motorcycle from the lower triple clamp using a model-specific pin (pin not included). Converts an economy stand into a triple-tree lift stand. Easy to clean.

€57.06 €71.74

$Deluxe Fork Stand — front fork, 139.7 mm (5-1/2\"), Black$

-€19.60

PSR Deluxe Fork Stand — front fork, 139.7 mm (5-1/2\"), Black

Tool-less adjusters; lifts from fork bottom for stable front-end support.

€91.51 €111.11

-€4.71

PSR Non-Spool Hardware Kit — 5-1/2" tire, rear mount, black

Hardware kit with all necessary fasteners and mounting components for compatible wheel stands.

€22.00 €26.71

-€22.28
Out of Stock

PSR MX Lift Stand with Built In Damper — MX Shock, Black

Built-in damper for controlled lowering; light, durable construction; rubber-padded platform for secure contact.

€86.64 €108.92

Sprocket Socket — 27 mm, 32 mm, Front sprocket, Anodized Green

-€10.12

PSR Sprocket Socket — 27 mm, 32 mm, Front sprocket, Anodized Green

A must-have for pro and home mechanics. Double shoulder design for Kawasaki front sprocket nuts that are almost impossible to loosen.

€47.22 €57.34

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS