TOOLS (5)

Driver Handle — Main drive gear, 5-speed, Blue anodized

-€33.92

JIMS Driver Handle — Main drive gear, 5-speed, Blue anodized

Installs main drive gear oil seal to correct depth with transmission assembled; includes protective sleeve; made in the U.S.A.

€131.92 €165.84

Tappet Oil Filter Screw Plug Tool — Black

-€10.19

JIMS Tappet Oil Filter Screw Plug Tool — Black

Removes tappet oil screen without removing the exhaust. Used to extract the tappet oil screen plug. Made in the U.S.A.

€39.65 €49.84

Shouldered Valve Guide Driver Set — 3/8", 1/32", 5/16" set, black/silver/yellow

-€15.27

JIMS Shouldered Valve Guide Driver Set — 3/8", 1/32", 5/16" set,...

Three-piece shouldered valve guide driver set (3/8", 1/32", 5/16") for guide removal and installation; made in the U.S.A.

€59.39 €74.66

-€42.29

JIMS Electronic Speedometer Sensor — JIMS, 74437-96

Top-quality replacement speedometer sensor. Fits aftermarket transmission cases with a speedometer sensor hole. Includes O-ring, hardware and OEM connector. Made in the U.S.A.

€164.48 €206.77

-€16.31

JIMS Thread Tapping Tool — JIMS 1169-1, Valve assembly

Precision tool for tapping threads; compatible with compression release valve installation kits. Made in USA.

€46.16 €62.47

-€4.38

DAYTONA Magnetic Silicone Tray — DAYTONA, 31021

Foldable silicone tray with an embedded magnet in the base to secure it to metal surfaces.

€12.39 €16.77

-€4.38

DAYTONA Magnetic Silicone Tray — DAYTONA

Foldable silicone tray with an embedded magnet in the base for secure placement on metal surfaces. Compact and portable.

€12.39 €16.77

-€29.80

JIMS Ignition Switch Housing Alignment Tool — Blue

Aligns ignition switch housing while tightening screws and positions the switch for proper fork lock engagement.

€115.91 €145.71

-€11.26

JIMS O² Sensor Tool Drive Receiver/Wrench — 3/8" drive, Silver

Socket accepts 3/8" drive or 7/8" wrench; removes and installs oxygen sensors on fuel-injected models; rated to 125 ft-lbs; made in the USA.

€43.80 €55.06

-€19.01

JIMS Ignition Switch Fork Lock Tool — Fork lock, Black

Locates on ignition switch face nut to hold switch for removal or installation. 3/8" drive access hole. Made in the USA.

€73.93 €92.94

Multimeter Volt Probe Kit — JIMS Kit, Black, Blue, Green, Red, Yellow

-€24.75

JIMS Multimeter Volt Probe Kit — JIMS Kit, Black, Blue, Green, Red,...

Color‑coded, fully insulated probes with 180°, 45°, 90° options and 4 mm banana plugs for safe, precise diagnostics.

€96.26 €121.01

Permanent Battery Lead O-01 — 20"/50cm, 1/4" & M6 eyelet, 15A fuse, 12V

-€2.88

DRAG SPECIALTIES Permanent Battery Lead O-01 — 20"/50cm, 1/4" & M6 eyelet, 15A...

Weather-protected permanent battery lead with premium quick connector, 20"/50cm length, 1/4" and M6 eyelets, integrated 15A fuse.

€6.02 €8.90

Ignition Switch Housing Alignment Tool — Vendor Part Number 944, Blue

-€29.85

JIMS Ignition Switch Housing Alignment Tool — Vendor Part Number...

Aligns the ignition switch housing during screw torquing to ensure correct switch orientation and longer housing life.

€116.08 €145.93

-€14.87

JIMS Battery Lifter — 5501, Silver

Modeled after larger automotive battery tools but sized for Harley-Davidson® models; easily lifts batteries with extremely tight fits. Made in the USA.

€57.83 €72.70

Permanent Battery Lead O-01 — 20"/50cm, 1/4" & M6 eyelets, 15A fuse, 12 V, black

-€43.38

DRAG SPECIALTIES Permanent Battery Lead O-01 — 20"/50cm, 1/4" & M6 eyelets, 15A...

Weather-protected permanent battery lead with 2-pin SAE connector, 1/4" and M6 eyelets, and integrated 15A fuse.

€96.57 €139.95

-€3.42

CUSTOM DYNAMICS Test Light — Black

Compact tester for 12–24 V DC circuits. Checks for shorts, open circuits and measures voltage for fast troubleshooting.

€10.91 €14.33

-€163.88

DAYTONA TWIN TEC LLC Twin Scan 4 Diagnostic Kit — 3.2" L x 2.2" W x 1" H, CAN Bus

Professional motorcycle diagnostic kit with ECM programming, DTC read/clear, key fob reprogramming, stand-alone data logging, analog inputs and scopemeter capability.

€637.33 €801.21

Drag Specialties Optimate 2 Duo EU Battery Charger — 12V, 2A, blue

-€16.31

DRAG SPECIALTIES Drag Specialties Optimate 2 Duo EU Battery Charger — 12V, 2A,...

Weatherproof automatic charger for Pb and LFP batteries; includes battery lead and clamps; safe for long-term maintenance and outdoor use.

€46.02 €62.33

Drag Specialties Optimate 5 EU — 12 V, EU plug

-€19.06

DRAG SPECIALTIES Drag Specialties Optimate 5 EU — 12 V, EU plug

Fully sealed 12V 4A charger and maintainer for lead-acid, AGM and gel motorcycle batteries. Diagnoses and recovers sulphated or deeply discharged batteries. IP54 rated; operable to -40°C.

€53.89 €72.95

Reverse Brake Bleeder Tool — Single- and dual-disc, with or without ABS, Black

-€46.39

JIMS Reverse Brake Bleeder Tool — Single- and dual-disc, with or...

Innovative reverse bleeding method removes all air without pumping; pushes fresh fluid through the master cylinder, follows OEM ABS procedures, saves time and fluid, made in the U.S.A.

€180.40 €226.79

-€9.57

JIMS 25 mm Wheel Bearing Adapter — Black, Metric

Precision 25 mm adapter for Harley-Davidson® models from '07 to '19. Made in the USA.

€37.23 €46.80

-€2.65

DRAG SPECIALTIES 6-in-1 Spoke Wrench — Standard style

Compact 6-in-1 spoke wrench that fits all standard spokes, perfect for quick wheel adjustments.

€7.49 €10.14

-€13.22

JIMS Rear Axle Installation Guide Tool — JIMS, Rear Axle, Black

Tool for aligning rear wheel, caliper brackets, hubs and spacers on Big Twin models with hollow 1" (25 mm) standard axles. Made in the USA.

€51.42 €64.64

-€1.90

DRAG SPECIALTIES Softail Shock Preload Adjuster Tool — Silver

Makes preload adjustments much easier on Softail rear suspension.

€5.35 €7.25

-€6.53

DRAG SPECIALTIES Heavy-Duty Chain Breaker — for chains 420–630, Black, Red

Compact tool with a compression screw for fast pin removal; fits a wide range of common chain sizes.

€18.47 €25.00

-€4.94

DRAG SPECIALTIES Shock Spanner Wrench — Silver, Zinc-Plated Steel

Heavy-duty shock wrench for easy rear shock spring preload adjustment.

€13.95 €18.89

Clutch Hub Puller — 10" stud, E84 Big Twin fit, Black

-€13.56

DRAG SPECIALTIES Clutch Hub Puller — 10" stud, E84 Big Twin fit, Black

Removes clutch hubs without removing the transmission end cover; 10" stud; fits E84 Big Twin models.

€38.32 €51.88

Primary Locking Bar — Primary Belt Drive, Primary Chain Drive, Black

-€9.57

JIMS Primary Locking Bar — Primary Belt Drive, Primary Chain Drive,...

Immobilizes the primary drive for safe tightening and loosening during maintenance. Prevents rotor and magnet damage.

€37.23 €46.80

Primary Locking Bar — Primary (drive), Black

-€9.57

JIMS Primary Locking Bar — Primary (drive), Black

Immobilizes the primary drive; allows torque-wrench tightening or breaker-bar loosening; prevents rotor and magnet damage; made in the U.S.A.

€37.23 €46.80

-€20.91

BARNETT Clutch Spring Compression Tool — Black

Compresses diaphragm clutch springs for easy removal and reinstallation of retainer rings. Made in the USA.

€81.32 €102.23

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS