TOOLS (5)

Timken® Bearing Race Installer — Crankcase, Left Side, Black, Silver

-€92.01

JIMS Timken® Bearing Race Installer — Crankcase, Left Side, Black,...

Installs bearing race straight into the left crankcase. A must for late-model cases. Made in the U.S.A.

€357.82 €449.83

-€18.62
Out of Stock

JIMS Piston Pin Keeper Tool — Black

Installs round circlip rings in one step without distorting the ring for secure wrist pin retention. Use to install piston retaining rings. Made in the U.S.A.

€72.41 €91.03

Tappet Adjustment Tool — Hydraulic adjuster, Pushrod application, Blue, Silver

-€10.29

JIMS Tappet Adjustment Tool — Hydraulic adjuster, Pushrod...

Hand tool for verifying tappet adjustment. Confirms tip fit and endplay; not compatible with solid or limited-travel tappets. Made in the United States.

€40.05 €50.34

-€83.63
Out of Stock

JIMS Rocker Bushing Reaming Tool — Rocker Box, Silver

Precision line reamer for rocker bushings; reams to .0007"–.0012" for factory fit. Made in the U.S.A.

€325.25 €408.88

Cam and Pinion Gear Gauge Pins — 0.108" gauge, gray

-€10.64
Out of Stock

JIMS Cam and Pinion Gear Gauge Pins — 0.108" gauge, gray

Check pinion gear pitch diameters. Refer to the service manual for sizing. Made in the U.S.A.

€41.37 €52.01

-€87.98

JIMS Clutch Gear Puller — Main shaft, kick starter, 4-speed, bronze

Removes kick starter clutch gear without damage; made in the United States.

€342.10 €430.08

-€29.80

JIMS Ignition Switch Housing Alignment Tool — Blue

Aligns ignition switch housing while tightening screws and positions the switch for proper fork lock engagement.

€115.91 €145.71

-€11.47
Out of Stock

JIMS Spark Plug and O² Sensor Thread Chaser — M12 x 1.25, Black

Restores damaged spark plug and O² sensor I.D. threads. Three-flute design with generous lead-in pilot for smooth thread repair. Made in the USA.

€44.59 €56.06

Onboard Diagnostic Voltmeter — Black, Red

-€27.92
Out of Stock

JIMS Onboard Diagnostic Voltmeter — Black, Red

Attaches to the battery for quick diagnosis of charging system and battery issues; works with 6 V and 12 V systems. Made in the USA.

€108.57 €136.49

-€26.60

JIMS Tire Air Pressure Gauge — 0–60 psi, Black

Records pressure until release button is engaged
Shock-resistant rubber-coated exterior
Made in the U.S.A.

€103.43 €130.03

Master Cylinder Hydraulic Brake Bleeding Solution — Silver, Front/Rear/Clutch kit

-€80.65

JIMS Master Cylinder Hydraulic Brake Bleeding Solution — Silver,...

Vacuum-bleed kit with a transparent cap; includes five caps and gaskets. Vacuum pump not included. Made in the U.S.A.

€313.61 €394.26

-€17.43

JIMS Master Cylinder Brake Bleeding Solution — Front brake, Silver

Transparent sealing cap that attaches to the master cylinder for a cleaner, low-fluid brake bleeding process. Vacuum pump not included.

€67.75 €85.18

-€19.20
Out of Stock

SNO STUFF Clutch Holder — Brass, for Arctic Cat

Holds the stationary clutch sheave for easy assembly and disassembly. Bench-mountable or clamp in a vice. Use with a jam nut and spider tool.

€54.28 €73.48

Secondary (Driven) Clutch Puller — Universal, Brass, fits '81-up reverse cam secondary clutches

-€21.89
Out of Stock

SNO STUFF Secondary (Driven) Clutch Puller — Universal, Brass, fits...

Universal puller for '81-up reverse cam secondary clutches with button or roller covers. Easy, reliable removal.

€61.90 €83.79

Clutch Spider Tool — fits Arctco 102C, 108C; Arctic Cat 9- and 6-tower; Comet 100C/101C/102C/108C/108EXP; Polaris P85/P90

-€30.35

SNO STUFF Clutch Spider Tool — fits Arctco 102C, 108C; Arctic Cat 9- and...

Detachable bar accepts a 1/2" drive torque wrench for re-torquing; long bar for extra leverage; fits Arctco 102C/108C, Arctic Cat 9- & 6-tower, Comet 100C/101C/102C/108C/108EXP, Polaris P85/P90.

€85.77 €116.12

-€11.36
Out of Stock

SNO STUFF Clutch Alignment Tool — Polaris, P-85, Silver

Helps keep clutch and belt aligned to avoid damage and costly repairs. Easy to use and maintains machine performance.

€32.13 €43.49

-€8.65
Out of Stock

SNO STUFF Clutch Alignment Tool — Ski‑Doo, ZX/F2000/S2000, Brass

Helps keep clutch and belt aligned to avoid damage and expensive repairs. Easy to use and keeps machine running in top condition.

€24.42 €33.07

-€12.86
Out of Stock

SNO STUFF Clutch Alignment Tool — CK-3, Ski-Doo, brass

Helps keep clutch and belt aligned to prevent damage and costly repairs. Easy to use and keeps the machine running in top condition.

€36.34 €49.20

-€8.28
Out of Stock

SNO STUFF Clutch Alignment Tool — YVXC, Yamaha, Brass

Helps keep clutch and belt aligned to prevent damage and costly repairs. Easy to use and maintains equipment performance.

€23.41 €31.69

-€88.46
Out of Stock

JIMS 5-Speed Transmission Main Drive Gear Tool — 5-Speed, Black

Installs and removes the main drive gear without removing the transmission. Made in the USA.

€344.00 €432.46

Primary Locking Bar — Primary Belt Drive, Primary Chain Drive, Black

-€9.57
Out of Stock

JIMS Primary Locking Bar — Primary Belt Drive, Primary Chain Drive,...

Immobilizes the primary drive for safe tightening and loosening during maintenance. Prevents rotor and magnet damage.

€37.23 €46.80

-€10.48
Out of Stock

JIMS Primary Locking Bar — Primary Belt Drive, Primary Chain Drive,...

Immobilizes the primary drive for secure maintenance. Enables torque-wrench tightening and breaker-bar loosening. Protects rotor and magnets. Made in the U.S.A.

€40.70 €51.18

-€20.26

JIMS O² Sensor Wrench — Black

Removes and installs O² sensors without removing exhaust pipes. 12 mm. Made in the USA.

€78.76 €99.02

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company