TOOLS (4)

Bearing Driver Set — 12–25 mm ID, 32–47 mm OD, Blue anodized

-€26.49

MOTION PRO Bearing Driver Set — 12–25 mm ID, 32–47 mm OD, Blue anodized

Quick-change adapters for 12–25 mm ID and 32–47 mm OD bearings. Reinforced handle and treated drivers. Includes protective case.

€74.84 €101.33

-€8.73

MOTION PRO Gasket Scraper — Aluminum engine case, Blue anodized

Brass and steel blades included; narrow slant-cut design for tight areas; ergonomic handle with blade storage.

€24.67 €33.40

Steering Stem Bearing Tool — Steering stem, Blue anodized

-€48.41

MOTION PRO Steering Stem Bearing Tool — Steering stem, Blue anodized

Protects the steering stem during bearing removal and installation. Includes 26 mm, 28 mm, 30-31 mm and 35-36 mm race protectors. Compact design fits within steering stops. Laser etched for easy identification. Made in the USA.

€136.82 €185.23

-€4.74

MOTION PRO Gasket Scraper Replacement Blades — Set of 2, Steel/Brass

Narrow angled blades for small, thin engine cases; easily sharpened; replacement blades for compatible gasket scrapers.

€13.36 €18.10

Steering Stem Bearing Tool — Fits most Harley-Davidson motorcycles, Black oxide

-€15.97

MOTION PRO Steering Stem Bearing Tool — Fits most Harley-Davidson...

Removes and installs tapered roller bearings at the base of the steering stem. Fits within lower triple clamp steering stops and suits most Harley-Davidson motorcycles with tapered roller bearings.

€45.13 €61.10

Fork Cap Tool for Showa — 50 mm fork cap, 1/2" square drive, Blue anodized

-€12.72

MOTION PRO Fork Cap Tool for Showa — 50 mm fork cap, 1/2" square drive,...

Tool for removing Showa twin-chamber fork caps and compression cartridges; outer ring fits 50 mm octagonal caps and can be clamped in a vise.

€35.93 €48.65

Fork Cap Socket — 19 mm hex, WP 4860 4CS fork fit, fits '14 KTM XC and '13–'14 Husaberg, blue anodized

-€7.98

MOTION PRO Fork Cap Socket — 19 mm hex, WP 4860 4CS fork fit, fits '14...

Fits '14 KTM XC and all '13–'14 Husaberg with WP 4860 4CS fork. 19 mm hex head for removing and installing left- and right-hand adjustable fork caps; enables proper torque during installation.

€22.57 €30.55

22 mm Showa SFF Air Fork Hex Tool — 22 mm, Blue anodized

-€4.59

MOTION PRO 22 mm Showa SFF Air Fork Hex Tool — 22 mm, Blue anodized

Precision tool for removing the lower sealing bolt on Showa SFF front suspension. Non-marking finish; made in the USA.

€12.95 €17.54

Spark Plug Gap Tool — 0.5–1.0 mm gauges, Blue anodized

-€4.57

MOTION PRO Spark Plug Gap Tool — 0.5–1.0 mm gauges, Blue anodized

Compact gauge for checking and setting spark plug gaps; includes 0.5–1.0 mm gauges and a built-in bottle opener.

€12.90 €17.47

Shock Spring Compressor — 56–96 mm collar range, clevis 35 mm, eyelet 17 mm, Blue anodized

-€50.23

MOTION PRO Shock Spring Compressor — 56–96 mm collar range, clevis 35 mm,...

Compact shock spring compressor that safely removes springs on most coilover shocks. Adapter plates fit 56–96 mm retaining collars; includes clevis and eyelet adapters.

€141.97 €192.20

-€2.22

MOTION PRO Sealmate Fork Seal Cleaner — Blue

Extracts dirt trapped behind fork seals to help maintain smooth fork operation. Works on conventional and upside-down forks.

€6.27 €8.49

U-Joint Press Tool — U-Joint, Black oxide, Metric

-€39.27

MOTION PRO U-Joint Press Tool — U-Joint, Black oxide, Metric

Includes 16 mm, 22 mm and 27 mm adapters and 16 mm & 20 mm hardened drive tips; floating press plate for easy U-joint service.

€110.99 €150.26

-€8.73

MOTION PRO 5 in 1 Damper Rod Bleed Tool — 5-in-1, blue anodized

Five thread sizes in one compact tool for clean, efficient damper rod bleeding.

€24.67 €33.40

-€1.48

MOTION PRO Fork Seal Bullet — 49 mm fork leg, Gray

Protects the fork seal and wiper from bushing-groove damage during installation. Eliminates the need to wrap the fork tube with tape, saving time.

€4.17 €5.65

Ringer® Fork Seal Driver — for 49 mm fork leg

-€14.78

MOTION PRO Ringer® Fork Seal Driver — for 49 mm fork leg

Locking ring with knurled finish for a secure, no-slip grip; innovative pin-free alignment; protective black e-coat with laser markings; perfectly weighted for consistent seal installation; limited lifetime warranty.

€41.78 €56.56

Ringer® Fork Seal Driver — For 50 mm fork leg

-€14.78

MOTION PRO Ringer® Fork Seal Driver — For 50 mm fork leg

Locking-ring seal driver with knurled finish, innovative alignment, black e-coat with laser markings, perfectly weighted, and limited lifetime warranty.

€41.78 €56.56

-€8.28

MOTION PRO Fork Cap Wrench — 50 mm fork cap, 14 mm slot, blue anodized

Removes the fork cap on dual-chamber closed-cartridge forks. CNC machined for precise fit and tolerance. Laser engraved markings. Original Motion Pro design.

€23.40 €31.68

BPF Rod Guide Wrench — BPF rod, black oxide

-€21.59

MOTION PRO BPF Rod Guide Wrench — BPF rod, black oxide

Removes the internal rod guide on Showa BPF 41 mm and 43 mm forks. The 43 mm side replaces Honda OEM tool 070MB-MGPA100, Kawasaki 57001-1758 and Suzuki 09940-84710; the 41 mm side replaces Honda 070MB-MCJ0100, Kawasaki 57001-1742 and Suzuki 09910-84711.

€61.01 €82.60

American V-Twin Steering Race Tool — Blue anodized, fits most Harley Davidson Dyna's, FXR's and early Baggers

-€30.45

MOTION PRO American V-Twin Steering Race Tool — Blue anodized, fits most...

2-in-1 puller and driver for safe removal and installation of steering bearing races; fits most Harley Davidson Dyna's, FXR's, and early Baggers.

€86.03 €116.48

Fork Seal Bullet Set — 36, 41, 43, 45, 46, 47, 48, 49 mm

-€8.14

MOTION PRO Fork Seal Bullet Set — 36, 41, 43, 45, 46, 47, 48, 49 mm

Protects fork seal and wiper during installation. Set includes bullets marked 36–49 mm for easy identification.

€22.99 €31.13

Shock Bearing Puller — Fits 24 mm OD bearings, Black oxide

-€9.16

MOTION PRO Shock Bearing Puller — Fits 24 mm OD bearings, Black oxide

Reversible puller cup with cutaway fits many shock reservoir and compression adjuster configurations. Safely removes and installs upper spherical bearings. Corrosion resistant black oxide coating. Hardened steel construction with brass thrust washer. Fits 24 mm OD bearings.

€25.90 €35.06

-€12.29

MOTION PRO Pro Seal Puller™ — Blue anodized

Precision puller with three interchangeable tips for safe, easy seal removal and a knurled handle for secure grip.

€34.70 €46.99

WP Shock Clevis Jam Nut Socket — 08-0730, Black oxide

-€7.69

MOTION PRO WP Shock Clevis Jam Nut Socket — 08-0730, Black oxide

Open-end design for clevis removal and rebound adjuster service without shock disassembly. Fits oval-profile clevis jam nuts found on WP shocks. Heat-treated, durable construction.