TOOLS (4)

Pushrod Tool for Harley-Davidson — Fits Twin Cam, Evolution, Shovelhead, Panhead, XL, Blue/Silver

-€14.61

MOTION PRO Pushrod Tool for Harley-Davidson — Fits Twin Cam, Evolution,...

Tool for removing and installing clip-on collapsible pushrod tubes on Twin Cam and earlier Harley-Davidson models; prevents knuckle cuts and engine scratches.

€41.32 €55.93

$Oil Filter Strap Wrench V2 — 38 mm strap, max 125 mm (5\"), 3/8\" drive, Black, Blue$

-€9.06

MOTION PRO Oil Filter Strap Wrench V2 — 38 mm strap, max 125 mm (5\"),...

Stronger 38 mm strap wrench for spin-on oil filters up to 125 mm (5"), for use with 3/8" drive ratchets or extensions.

€25.64 €34.70

-€1.48

MOTION PRO Fork Seal Bullet — for 48 mm fork leg, orange

Guides and protects the fork seal and wiper during installation; eliminates the need to wrap the fork tube with tape.

€4.17 €5.65

-€4.28

MOTION PRO Fork Compression Valve Removal Tool — Silver, 6061-T6 aluminum

Removes cartridge compression valves; 19 mm hex drive and 36 mm octagon engagement for secure extraction.

€12.13 €16.41

Blind Bearing Remover Kit with Slide Hammer — MOTION PRO, Kit, Black/Silver, Machined

-€81.82

MOTION PRO Blind Bearing Remover Kit with Slide Hammer — MOTION PRO, Kit,...

High-quality blind bearing remover kit with slide hammer; includes 8–35 mm collets and a lifetime limited warranty.

€398.17 €479.99

-€2.52

MOTION PRO Flywheel Puller — M14 x 1.5, Black oxide

Removes flywheels and rotors; heat-treated high-carbon steel with durable hot black oxide finish. Limited lifetime warranty.

€7.11 €9.63

-€14.49

MOTION PRO Clip-On Handlebar Alignment Tool — Blue anodized, Red anodized

Collapsible, compact alignment tool for aftermarket clip on handlebar installation with an adjustable arm and knurled thumb screw.

€40.94 €55.43

-€6.65

MOTION PRO Fork Cap Wrench — 49 mm, 12 mm slot, blue anodized

Removes fork cap cartridges on dual-chamber closed-cartridge forks. CNC machined for precise fit with laser-engraved markings.

€18.81 €25.46

-€10.33

K&L SUPPLY MC450 Rubber Pad — Center Jack, black

Rubber non-skid pad with self-adhesive backing mounts on top of the MC450 center jack for added grip and protection.

€29.19 €39.52

-€4.28

MOTION PRO Magnetic Nut Driver Set — Black, Metric, Hex drive

9-piece 1/4" socket bit set; includes sizes 5–13 mm and a holder; for quick-release drivers only.

€12.13 €16.41

MC455 Fat Jack Center Jack — 498 kg (1100 lb), 16 in × 10 in, Gold

-€175.47

K&L SUPPLY MC455 Fat Jack Center Jack — 498 kg (1100 lb), 16 in × 10 in,...

Included self-adhesive rubber nonskid pad; wide nonskid deck for increased lifting stability; lifts front or rear of bikes on MC600-type lifts; compatible with MC464 Fat Jack dolly; do not use air/impact guns.

€495.91 €671.38

-€1.40

MOTION PRO JIS Cross-Head Hex-Drive Bits — #1 Hex Drive, pair, black

Precision bits that fit JIS cross-head screws and reduce cam‑out. Using a standard Philips driver on JIS screws can damage the head.

€3.97 €5.37

Hi-Pressure Shock Pump — 23 cm, rear shock, 0–30 psi, black/silver

-€11.72

DRAG SPECIALTIES Hi-Pressure Shock Pump — 23 cm, rear shock, 0–30 psi,...

Twist-and-lock removable gauge for compact storage. Fits rear shocks and front forks. Rotary flexible hose, die-cast gauge base and ergonomic handle. Precise adjust button for fine control.

€33.10 €44.82

Hi-Pressure Shock Pump — Rear shock, 0–60 psi, 23 cm (9")

-€12.06

DRAG SPECIALTIES Hi-Pressure Shock Pump — Rear shock, 0–60 psi, 23 cm (9")

Twist-and-lock removable gauge, rotary flexible hose, die-cast gauge base and ergonomic handle. Precise adjust button (2–3 psi per push). Fits in small storage areas.

€34.09 €46.15

-€1.41

MOTION PRO JIS Cross-Head Hex-Drive Bits — #3, Black

Bits diseñados para tornillos JIS de cabeza cruzada; ideales para productos japoneses y compatibles con tornillos Philips tradicionales. Evite usar un destornillador Philips en tornillos JIS para no dañar la cabeza.

€4.01 €5.42

Ringer® Fork Seal Driver — 35-36 mm fork leg, blue anodized

-€14.78

MOTION PRO Ringer® Fork Seal Driver — 35-36 mm fork leg, blue anodized

Locking ring with knurled finish for secure grip; easier and more secure than pin-aligned drivers; black e-coat with laser markings; perfectly weighted; limited lifetime warranty.

€41.78 €56.56

Ringer® Fork Seal Driver — For 37 mm fork leg

-€14.78

MOTION PRO Ringer® Fork Seal Driver — For 37 mm fork leg

Locking ring with knurled finish for a secure, no-slip grip. Innovative design that is easier and more secure than pin-aligned drivers. High-quality protective black e-coat with laser-engraved markings. Perfectly weighted for consistent seal installation. Limited lifetime warranty.

€41.78 €56.56

Ringer® Fork Seal Driver — 39 mm fork leg fitment, Blue & Silver anodized

-€14.78

MOTION PRO Ringer® Fork Seal Driver — 39 mm fork leg fitment, Blue &...

Knurled locking ring for a secure, no‑slip grip; innovative pinless design; black e-coat with laser‑engraved markings; perfectly weighted to install seals. Limited lifetime warranty.

€41.78 €56.56

-€1.97

DRAG SPECIALTIES Clear Timing Hole Plug — 19 mm (3/4"), timing mark, clear

Locates the timing mark without getting an eye full of oil.

€5.57 €7.54

-€46.76

DRAG SPECIALTIES Center Jack — 453 kg (1000 lb), 37 cm (14-1/2"), Black/Gray

Sturdy manual scissor jack with a non-slip rubber top pad and large footprint for stable motorcycle lifting. Not for use with air or electric impact guns.

€132.15 €178.91

Ringer® Fork Seal Driver — 41 mm fork leg, Blue anodized

-€14.78

MOTION PRO Ringer® Fork Seal Driver — 41 mm fork leg, Blue anodized

Precision fork seal driver with a knurled locking ring for secure, no-slip installation and a limited lifetime warranty.

€41.78 €56.56

Ringer® Fork Seal Driver — 43 mm fork leg, blue and silver anodized

-€14.78

MOTION PRO Ringer® Fork Seal Driver — 43 mm fork leg, blue and silver...

Knurled locking ring for secure, no-slip grip and positive locking during use. Innovative design is easier and more secure than pin-aligned drivers. High-quality black e-coat with laser-engraved markings. Perfectly weighted for consistent seal installation. Limited lifetime warranty.

€41.78 €56.56

-€44.19

DRAG SPECIALTIES Center Jack — 1,000 lb (453 kg), 14-1/2" max height

Sturdy scissor center jack with a durable rubber top pad and wide base for stable motorcycle lifting. Do not use air or electric impact guns.

€124.89 €169.08

Ringer® Fork Seal Driver — For 45 mm fork leg, blue anodized

-€14.78

MOTION PRO Ringer® Fork Seal Driver — For 45 mm fork leg, blue anodized

Locking knurled ring for secure grip; easier and more secure than pin-aligned drivers; protective black e-coat with laser markings; perfectly weighted; limited lifetime warranty.

€41.78 €56.56

Ringer® Fork Seal Driver — 46-47 mm fork leg, Blue anodized

-€14.78

MOTION PRO Ringer® Fork Seal Driver — 46-47 mm fork leg, Blue anodized

Knurled locking ring for a secure, no-slip grip.
Innovative design outperforms old pin-aligned drivers.
Durable black e-coat with laser-engraved markings.
Perfectly weighted for clean seal installation; limited lifetime warranty.

€41.78 €56.56

Ringer® Fork Seal Driver — for 48 mm fork leg, blue anodized

-€14.78

MOTION PRO Ringer® Fork Seal Driver — for 48 mm fork leg, blue anodized

Knurled locking ring for a no-slip grip, innovative pin-free design, black e-coat with laser markings, perfectly weighted, limited lifetime warranty.

€41.78 €56.56

-€8.20

MOTION PRO Shock Spanner Punch — Blue, Silver

Tool for turning hard-to-reach lock and preload rings on rear shocks; angled brass tip and long shaft for secure reach.

€23.18 €31.38

Fork Cap Tool for KYB — 49 mm, 1/2" square drive, Blue anodized

-€13.17

MOTION PRO Fork Cap Tool for KYB — 49 mm, 1/2" square drive, Blue anodized

Removes fork cap and compression cartridge from twin-chamber KYB forks on late-model Honda, Husqvarna, Kawasaki and Yamaha off-road motorcycles. Outer ring clamps in a vise and inner body holds the cartridge for safer, faster removal. Lifetime limited warranty.

€37.19 €50.36

-€14.78

MOTION PRO Steering Head Bearing Race Driver — Blue anodized

Fits tapered steering bearing races 41–42 mm, 47–48 mm, 51–52 mm and 55–56 mm; installs races safely with double-sided drivers and an ergonomic handle.

€41.78 €56.56

Bearing Driver Set — 12–25 mm ID, 32–47 mm OD, Blue anodized

-€26.49

MOTION PRO Bearing Driver Set — 12–25 mm ID, 32–47 mm OD, Blue anodized

Quick-change adapters for 12–25 mm ID and 32–47 mm OD bearings. Reinforced handle and treated drivers. Includes protective case.

€74.84 €101.33

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS