TOOLS (4)

OptiMate™ Monitor — DIN plug, SAE plug, Black

-€7.94

TECMATE OptiMate™ Monitor — DIN plug, SAE plug, Black

SAE to DIN/AUTO 12 V adapter with LED state-of-charge monitor; fits 21 mm AUTO and 12 mm DIN sockets; weatherproof sealing cap; supports AGM and LFP; operates to -40°C/-40°F; two automatic modes.

€17.02 €24.96

$OptiMate™ Battery to USB-C Charger — 12V, 5V, 203 cm (80\")$

-€10.86

TECMATE OptiMate™ Battery to USB-C Charger — 12V, 5V, 203 cm (80\")

Onboard charger and monitor for charging devices and protecting your parked battery.

€23.27 €34.13

-€1.84

TECMATE OptiMate Swivelling Charger HOOK — Black, fits OptiMate chargers

Swivelling mount to hang your OptiMate charger on handlebars, struts or cables; velcro included for neat wire management.

€3.95 €5.79

-€10.06

TECMATE OptiMate USB O-119 — 3300 mA, 5 V, Blue

Weatherproof portable dual USB charger with in-line 180° BIKE plug for BMW, Triumph and Ducati Multistrada. Fast, safe charging for USB‑A and USB‑C devices with automatic one-hour shutoff to protect the vehicle battery.

€21.57 €31.63

-€3.70

TECMATE OptiMate CABLE O-49 — 24V, Black

SAE to XLR 3-pin adapter cable for 24V battery charging. Length 30 cm / 12". Rubber in-line seal, thicker insulation, 10 A avg / 13 A max.

€7.93 €11.63

-€9.79

TECMATE OptiMate USB O-114 — 5 V, 3.3 A, Blue

Portable dual-output USB charger with USB-A and USB-C and a 90° DIN BIKE plug for BMW and Triumph. Built-in one-hour safety shutoff to prevent draining a parked vehicle battery.

€21.00 €30.79

$MagCode® 12 V Magnetic Connector Clip Cable — 12V, 75 cm (30\"), 10A (13A max), MagCode-to-SAE$

-€17.22

TECMATE MagCode® 12 V Magnetic Connector Clip Cable — 12V, 75 cm...

MagCode® 12 V magnetic connector clip cable with 75 cm nylon-sleeved 16 AWG cable, SAE termination, and rubber in-line seal.

€36.91 €54.13

OptiMate™ Magnetic Port Connection — 101.5 cm (40") cable, 12 V, eyelet connector

-€22.20

TECMATE OptiMate™ Magnetic Port Connection — 101.5 cm (40") cable, 12...

Short-circuit proof magnetic connection with sealing cap and weather-rated insulation for dependable outdoor use.

€62.75 €84.95

-€8.89
Out of Stock

QUAD LOGIC Polaris Carburetor Choke Nut Tool — Silver, Carburetor

Choke nut wrench for removing and installing choke cable fittings on Mikuni 34–40 mm carburetors. Ideal for quick Polaris carburetor repairs.

€25.11 €34.00

-€11.55

QUAD LOGIC Fuel Pump Nut Wrench for Polaris — Silver

Helps remove stuck fuel pump retainer nuts on Polaris models; reduces time and avoids damage.

€32.64 €44.19

Ball Joint Removal Tool for Strut Front Suspension — '90–'21 ATV/UTV fit, zinc

-€18.40

QUAD LOGIC Ball Joint Removal Tool for Strut Front Suspension — '90–'21...

Two-piece steel tool for removing and installing ball joints on strut-style front suspension. Works with standard shop presses; fits '90–'21 ATV/UTV models.

€52.01 €70.41

-€18.40
Out of Stock

QUAD LOGIC Ball Joint Removal Tool for A-Arm Front Suspension — Zinc

Two-piece steel tool for removing and installing ball joints with a standard shop press; heavy-duty construction; fits 2008-2020 A-arm front suspension ATVs/UTVs (except RZR/General 1000).

€52.01 €70.41

Ball Joint Removal Tool for A-Arm Front Suspension — A-Arm front suspension, zinc

-€18.40

QUAD LOGIC Ball Joint Removal Tool for A-Arm Front Suspension — A-Arm...

Two-piece steel tool for removing and installing ball joints with a standard shop press; heavy-duty for home or professional shops. Fits '15–'22 ATV/UTV A-Arm front suspensions.

€52.01 €70.41

-€8.33

QUAD LOGIC Plastic Rivet Pliers — Black, QUAD LOGIC

Removes plastic rivets cleanly without damaging the head.

Designed for quick, repeatable removal; fits RZR plastic rivets.

€23.53 €31.86

-€207.93
Out of Stock

TECMATE BatteryMate 150-9 — 12 V, 1–10 A

Selectable load-tester, desulfator and charger that restores neglected starter batteries and supports MF commissioning charges.

€808.65 €1,016.58

OptiMate™ Power Adapter — 12 V, 12 mm DIN, 61 cm (24"), 2.5 mm plug

-€6.35

TECMATE OptiMate™ Power Adapter — 12 V, 12 mm DIN, 61 cm (24"), 2.5 mm...

Adapter for powering heated apparel from a motorcycle power socket; rugged, low-profile design.

€13.61 €19.96

-€405.82

DAYTONA TWIN TEC LLC Twin Scan Complete Kit — Diagnostic Scan Tool

Complete tuning and diagnostic kit that communicates with ECM/BCM, logs up to one hour, and includes wide-band sensors and PC software.

€1,578.17 €1,983.99

-€65.33
Out of Stock

TECMATE OptiMate Solar Charger 60W — 12V 5A

Smart 6-step solar charger and maintainer for lead-acid and deep-cycle batteries. Weatherproof design with automatic charge control and battery-state display.

€184.63 €249.96

-€30.81
Out of Stock

TECMATE OptiMate 6 Select — 12V 6A, Blue

GOLD series 9-step automatic charger and maintainer with power supply mode, AMPMATIC, temperature compensation, weatherproof design, S.O.H. testing and revive capability from 0.5V.

€87.48 €118.29

OptiMate 2 DUO x 4 Bank — 4-bank, 12 V / 12.8 V, 2 A

-€55.53
Out of Stock

TECMATE OptiMate 2 DUO x 4 Bank — 4-bank, 12 V / 12.8 V, 2 A

Four independent charging banks that automatically adapt to lead-acid and lithium LFP batteries; designed for workshop use and long-term maintenance.

€156.93 €212.46

-€101.63
Out of Stock

TECMATE OptiMate Pro-4 DUO — 4 charging banks, 12V 5A

Automatic diagnostic charger for four batteries with independent banks; activates new batteries, saves deeply discharged units, and runs state‑of‑health tests. Replaceable output cords and service‑oriented design.

€397.66 €499.29

-€20.36
Out of Stock

QUAD LOGIC Wheel Bearing Tool — Brass, front and rear wheel bearings

Torpedo installation and removal set for fast, correct bearing removal and installation on front or rear wheels.

€57.57 €77.93

-€20.24
Out of Stock

QUAD LOGIC Wheel Bearing Tool — rear wheel bearing

Torpedo-style installer/remover set for front and rear wheel bearings. Includes hub holder and driver to press bearings out and press new ones in.

€57.20 €77.44

Wheel Bearing Tool — Brass, For Front Wheel Bearing, Only for Front Strut Style Suspension

-€23.03
Out of Stock

QUAD LOGIC Wheel Bearing Tool — Brass, For Front Wheel Bearing, Only for...

Torpedo-style installer/remover set for wheel bearings; includes hub holder and driver for removal and installation.

€65.09 €88.12

-€23.03
Out of Stock

QUAD LOGIC Wheel Bearing Tool — For front and rear wheel bearings

Torpedo installation and removal set for front and rear wheel bearings; includes hub holder and driver for press-fit removal and installation.

€65.09 €88.12

-€20.24

QUAD LOGIC Wheel Bearing Tool — Brass, For front and rear wheel bearings

Torpedo installation and removal tool set for front and rear wheel bearings. Includes hub holder and driver to press bearings out and in.

€57.20 €77.44

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS