TOOLS (4)

-€28.57

JIMS Clutch Hub Puller — Clutch hub, Black

Works on Big Twin sprockets, alternator covers and early XL clutches. Fits 3-, 5-, 10-finger and 45" hubs. Made in the U.S.A.

€111.14 €139.71

-€26.97

JIMS Top Nut Fork Socket — 35 mm

Tool for removing and installing top fork nuts; rubber-protected socket, clears most handlebars.

€104.89 €131.86

Balancer Shaft Bearing Remover — Kit, Black

-€48.93

JIMS Balancer Shaft Bearing Remover — Kit, Black

Safe, damage-free removal of balancer shaft bearings; pushes on the bearing outer diameter; removes bearings from the "B" motor case in one smooth motion; made in the USA.

€190.26 €239.19

-€7.81

JIMS Balancer Shaft Retention Pins — Flywheel assembly, silver

Locks into balancer shaft sprocket pinholes to prevent the balancer from turning out of sync with the flywheel. Use when servicing the flywheel assembly. Made in the U.S.A.

€30.39 €38.20

-€28.78

JIMS Piston Support Plate — JIMS 1164, Black

Non-marring flat plate for pushing piston bottoms during ring or cylinder installation. Made in the U.S.A.

€111.93 €140.71

Compression Release Valve Installation Kit — Engine case fit

-€142.45

JIMS Compression Release Valve Installation Kit — Engine case fit

Complete kit to drill, spot face, tap and install compression release valves on front and rear heads; fits big-inch and high-compression Twin Cams.

€553.95 €696.40

Inner Cam Bearing Go and No-Go Gauges — pair, silver

-€21.59

JIMS Inner Cam Bearing Go and No-Go Gauges — pair, silver

Fast, accurate Go/No‑Go gauges to check the inside diameter of inner cam bearings. Use them to confirm whether the cam will be too loose or too tight. Made in the U.S.A.

€68.14 €89.73

-€26.87

JIMS Fork Seal and Cap Installer — 41 mm fork tube, black

Installs fork and dust seals; lightly grease before use. Made in the U.S.A.

€104.50 €131.37

-€21.50

JIMS Fork Nut Socket — JIMS, Black

Removes and installs the top fork-tube plug; fits 41 mm forks. Made in the U.S.A.

€83.63 €105.13

Hardware Organizer M8 — Blue, powder-coated

-€27.75

JIMS Hardware Organizer M8 — Blue, powder-coated

Milwaukee Eight specific hardware index tools to store and organize bolts during disassembly. Can be placed on its side for Loctite application. Magnetic storage captures slip-fit dowels. Made in the USA.

€107.92 €135.67

Exhaust Stud Drill Plate — Blue, anodized

-€40.00

JIMS Exhaust Stud Drill Plate — Blue, anodized

Positions exhaust port seals evenly and works with exhaust flange nuts. Made in the U.S.A.

€155.56 €195.56

Head Bolt Torque Gauge — Torque plate, head bolt application, blue

-€6.19

JIMS Head Bolt Torque Gauge — Torque plate, head bolt application,...

Accurate gauge for measuring 90° when tightening head bolts. Laser-engraved torquing sequence; fits Twin Cam and Evolution engines; made in the U.S.A.

€24.07 €30.26

-€96.27

JIMS Hardware Organizer M8 — Blue

Milwaukee Eight specific hardware index tools that store and organize bolts during disassembly. Side-mountable to aid Loctite application. Magnetic storage captures slip-fit dowels. Made in the USA.

€374.39 €470.66

-€52.24

JIMS Inner Cam Bearing Installation Tool — Right, Black

Presses inner cam bearings to the correct depth for accurate seating. Made in the U.S.A.

€203.16 €255.40

-€22.12

JIMS Clutch Spring Compressor Nut — Black

Tool for releasing the clutch spring; enables easy retainer ring removal and installation. Made in the USA.

€62.53 €84.65

-€33.12

JIMS Snap Ring Tool — Timken® bearing, black

Tool for removing and installing outer race snap rings on tapered roller bearings. Essential for OEM and aftermarket case ring replacements. Made in the U.S.A.

€128.78 €161.90

Tappet Block Alignment Tool — Crankcase, Black

-€7.15

JIMS Tappet Block Alignment Tool — Crankcase, Black

Precision tool for aligning the crankcase oil hole to the tappet block; also used for Evolution head rocker box bases and Harley-Davidson® Twin Cam oil pump alignment. Made in the U.S.A.

€27.78 €34.93

Transmission Shaft Installer — 5-Speed, Black

-€30.16

JIMS Transmission Shaft Installer — 5-Speed, Black

Installs shafts without the use of a hydraulic or arbor press. Made in the U.S.A.

€117.28 €147.44

-€23.66

JIMS Steering Head Bearing Race Installer — Black

Installs steering head bearing races and frame cups straight and without damage; made in the U.S.A.

€92.01 €115.67

-€87.73

JIMS Sprocket Shaft Bearing Remover — Sprocket shaft, Black

Removes Timken® bearings on late '86–'02 Big Twins; durable U.S.-made construction.

€341.16 €428.89

-€51.82

JIMS Main Drive Gear Bearing Removal Tool — 5-Speed, Blue, Silver

Removes old bearings straight without damaging the transmission case; usable without removing the transmission from the bike. Made in the U.S.A.

€201.53 €253.35

Driver Handle — Main drive gear, 5-speed, Blue anodized

-€33.92

JIMS Driver Handle — Main drive gear, 5-speed, Blue anodized

Installs main drive gear oil seal to correct depth with transmission assembled; includes protective sleeve; made in the U.S.A.

€131.92 €165.84

Tappet Oil Filter Screw Plug Tool — Black

-€10.19

JIMS Tappet Oil Filter Screw Plug Tool — Black

Removes tappet oil screen without removing the exhaust. Used to extract the tappet oil screen plug. Made in the U.S.A.

€39.65 €49.84

Shouldered Valve Guide Driver Set — 3/8", 1/32", 5/16" set, black/silver/yellow

-€15.27

JIMS Shouldered Valve Guide Driver Set — 3/8", 1/32", 5/16" set,...

Three-piece shouldered valve guide driver set (3/8", 1/32", 5/16") for guide removal and installation; made in the U.S.A.

€59.39 €74.66

-€42.29

JIMS Electronic Speedometer Sensor — JIMS, 74437-96

Top-quality replacement speedometer sensor. Fits aftermarket transmission cases with a speedometer sensor hole. Includes O-ring, hardware and OEM connector. Made in the U.S.A.

€164.48 €206.77

-€16.31

JIMS Thread Tapping Tool — JIMS 1169-1, Valve assembly

Precision tool for tapping threads; compatible with compression release valve installation kits. Made in USA.

€46.16 €62.47

Weatherproof permanent battery lead, powersport — 10 A, Black, Red

-€3.96

TECMATE Weatherproof permanent battery lead, powersport — 10 A, Black,...

Permanent weatherproof battery lead for powersport vehicles; provides a secure, low-profile permanent connection.

€8.50 €12.46

Charging Cable Extender — 2.5 m, compatible with pre-2015 AccuMate and pre-2012 OptiMate

-€4.49

TECMATE Charging Cable Extender — 2.5 m, compatible with pre-2015...

2.5 m extension cable with SAE connectors to extend charger reach; compatible with pre-2015 AccuMate and pre-2012 OptiMate.

€9.64 €14.13

Charger Replacement Clips — 10 A, Alligator Clamp, Black, Red

-€3.96

TECMATE Charger Replacement Clips — 10 A, Alligator Clamp, Black, Red

Replacement battery clips with easy-grip handles and a TM plug; fits round, square and flat tab posts.

€8.50 €12.46

-€29.80

JIMS Ignition Switch Housing Alignment Tool — Blue

Aligns ignition switch housing while tightening screws and positions the switch for proper fork lock engagement.

€115.91 €145.71

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company