TOOLS (4)

Inner Cam Bearing Go and No-Go Gauges — pair, silver

-€21.59

JIMS Inner Cam Bearing Go and No-Go Gauges — pair, silver

Fast, accurate Go/No‑Go gauges to check the inside diameter of inner cam bearings. Use them to confirm whether the cam will be too loose or too tight. Made in the U.S.A.

€68.14 €89.73

-€26.87

JIMS Fork Seal and Cap Installer — 41 mm fork tube, black

Installs fork and dust seals; lightly grease before use. Made in the U.S.A.

€104.50 €131.37

-€21.50

JIMS Fork Nut Socket — JIMS, Black

Removes and installs the top fork-tube plug; fits 41 mm forks. Made in the U.S.A.

€83.63 €105.13

Hardware Organizer M8 — Blue, powder-coated

-€27.75

JIMS Hardware Organizer M8 — Blue, powder-coated

Milwaukee Eight specific hardware index tools to store and organize bolts during disassembly. Can be placed on its side for Loctite application. Magnetic storage captures slip-fit dowels. Made in the USA.

€107.92 €135.67

Exhaust Stud Drill Plate — Blue, anodized

-€40.00

JIMS Exhaust Stud Drill Plate — Blue, anodized

Positions exhaust port seals evenly and works with exhaust flange nuts. Made in the U.S.A.

€155.56 €195.56

Head Bolt Torque Gauge — Torque plate, head bolt application, blue

-€6.19

JIMS Head Bolt Torque Gauge — Torque plate, head bolt application,...

Accurate gauge for measuring 90° when tightening head bolts. Laser-engraved torquing sequence; fits Twin Cam and Evolution engines; made in the U.S.A.

€24.07 €30.26

-€96.27

JIMS Hardware Organizer M8 — Blue

Milwaukee Eight specific hardware index tools that store and organize bolts during disassembly. Side-mountable to aid Loctite application. Magnetic storage captures slip-fit dowels. Made in the USA.

€374.39 €470.66

-€52.24

JIMS Inner Cam Bearing Installation Tool — Right, Black

Presses inner cam bearings to the correct depth for accurate seating. Made in the U.S.A.

€203.16 €255.40

-€22.12

JIMS Clutch Spring Compressor Nut — Black

Tool for releasing the clutch spring; enables easy retainer ring removal and installation. Made in the USA.

€62.53 €84.65

-€33.12

JIMS Snap Ring Tool — Timken® bearing, black

Tool for removing and installing outer race snap rings on tapered roller bearings. Essential for OEM and aftermarket case ring replacements. Made in the U.S.A.

€128.78 €161.90

-€5.67

CUSTOM DYNAMICS LED Road Flare Safety Light — Emergency, Clear, Red

Compact LED road flare with a 360° beacon, three emergency modes, built-in hook and rear magnet. Requires 3 AAA batteries (sold separately).

€22.01 €27.68

Tappet Block Alignment Tool — Crankcase, Black

-€7.15

JIMS Tappet Block Alignment Tool — Crankcase, Black

Precision tool for aligning the crankcase oil hole to the tappet block; also used for Evolution head rocker box bases and Harley-Davidson® Twin Cam oil pump alignment. Made in the U.S.A.

€27.78 €34.93

Transmission Shaft Installer — 5-Speed, Black

-€30.16

JIMS Transmission Shaft Installer — 5-Speed, Black

Installs shafts without the use of a hydraulic or arbor press. Made in the U.S.A.

€117.28 €147.44

-€23.66

JIMS Steering Head Bearing Race Installer — Black

Installs steering head bearing races and frame cups straight and without damage; made in the U.S.A.

€92.01 €115.67

-€87.73

JIMS Sprocket Shaft Bearing Remover — Sprocket shaft, Black

Removes Timken® bearings on late '86–'02 Big Twins; durable U.S.-made construction.

€341.16 €428.89

-€51.82

JIMS Main Drive Gear Bearing Removal Tool — 5-Speed, Blue, Silver

Removes old bearings straight without damaging the transmission case; usable without removing the transmission from the bike. Made in the U.S.A.

€201.53 €253.35

Driver Handle — Main drive gear, 5-speed, Blue anodized

-€33.92

JIMS Driver Handle — Main drive gear, 5-speed, Blue anodized

Installs main drive gear oil seal to correct depth with transmission assembled; includes protective sleeve; made in the U.S.A.

€131.92 €165.84

Tappet Oil Filter Screw Plug Tool — Black

-€10.19

JIMS Tappet Oil Filter Screw Plug Tool — Black

Removes tappet oil screen without removing the exhaust. Used to extract the tappet oil screen plug. Made in the U.S.A.

€39.65 €49.84

Shouldered Valve Guide Driver Set — 3/8", 1/32", 5/16" set, black/silver/yellow

-€15.27

JIMS Shouldered Valve Guide Driver Set — 3/8", 1/32", 5/16" set,...

Three-piece shouldered valve guide driver set (3/8", 1/32", 5/16") for guide removal and installation; made in the U.S.A.

€59.39 €74.66

-€42.29

JIMS Electronic Speedometer Sensor — JIMS, 74437-96

Top-quality replacement speedometer sensor. Fits aftermarket transmission cases with a speedometer sensor hole. Includes O-ring, hardware and OEM connector. Made in the U.S.A.

€164.48 €206.77

-€16.31

JIMS Thread Tapping Tool — JIMS 1169-1, Valve assembly

Precision tool for tapping threads; compatible with compression release valve installation kits. Made in USA.

€46.16 €62.47

-€29.80

JIMS Ignition Switch Housing Alignment Tool — Blue

Aligns ignition switch housing while tightening screws and positions the switch for proper fork lock engagement.

€115.91 €145.71

-€11.26

JIMS O² Sensor Tool Drive Receiver/Wrench — 3/8" drive, Silver

Socket accepts 3/8" drive or 7/8" wrench; removes and installs oxygen sensors on fuel-injected models; rated to 125 ft-lbs; made in the USA.

€43.80 €55.06

-€19.01

JIMS Ignition Switch Fork Lock Tool — Fork lock, Black

Locates on ignition switch face nut to hold switch for removal or installation. 3/8" drive access hole. Made in the USA.

€73.93 €92.94

Multimeter Volt Probe Kit — JIMS Kit, Black, Blue, Green, Red, Yellow

-€24.75

JIMS Multimeter Volt Probe Kit — JIMS Kit, Black, Blue, Green, Red,...

Color‑coded, fully insulated probes with 180°, 45°, 90° options and 4 mm banana plugs for safe, precise diagnostics.

€96.26 €121.01

Ignition Switch Housing Alignment Tool — Vendor Part Number 944, Blue

-€29.85

JIMS Ignition Switch Housing Alignment Tool — Vendor Part Number...

Aligns the ignition switch housing during screw torquing to ensure correct switch orientation and longer housing life.

€116.08 €145.93

-€14.87

JIMS Battery Lifter — 5501, Silver

Modeled after larger automotive battery tools but sized for Harley-Davidson® models; easily lifts batteries with extremely tight fits. Made in the USA.

€57.83 €72.70

-€3.42

CUSTOM DYNAMICS Test Light — Black

Compact tester for 12–24 V DC circuits. Checks for shorts, open circuits and measures voltage for fast troubleshooting.

€10.91 €14.33

-€163.88

DAYTONA TWIN TEC LLC Twin Scan 4 Diagnostic Kit — 3.2" L x 2.2" W x 1" H, CAN Bus

Professional motorcycle diagnostic kit with ECM programming, DTC read/clear, key fob reprogramming, stand-alone data logging, analog inputs and scopemeter capability.

€637.33 €801.21

Reverse Brake Bleeder Tool — Single- and dual-disc, with or without ABS, Black

-€46.39

JIMS Reverse Brake Bleeder Tool — Single- and dual-disc, with or...

Innovative reverse bleeding method removes all air without pumping; pushes fresh fluid through the master cylinder, follows OEM ABS procedures, saves time and fluid, made in the U.S.A.

€180.40 €226.79

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company