TOOLS (4)

Ringer® Fork Seal Driver — for 48 mm fork leg, blue anodized

-€14.78

MOTION PRO Ringer® Fork Seal Driver — for 48 mm fork leg, blue anodized

Knurled locking ring for a no-slip grip, innovative pin-free design, black e-coat with laser markings, perfectly weighted, limited lifetime warranty.

€41.78 €56.56

-€8.20

MOTION PRO Shock Spanner Punch — Blue, Silver

Tool for turning hard-to-reach lock and preload rings on rear shocks; angled brass tip and long shaft for secure reach.

€23.18 €31.38

Fork Cap Tool for KYB — 49 mm, 1/2" square drive, Blue anodized

-€13.17

MOTION PRO Fork Cap Tool for KYB — 49 mm, 1/2" square drive, Blue anodized

Removes fork cap and compression cartridge from twin-chamber KYB forks on late-model Honda, Husqvarna, Kawasaki and Yamaha off-road motorcycles. Outer ring clamps in a vise and inner body holds the cartridge for safer, faster removal. Lifetime limited warranty.

€37.19 €50.36

-€14.78

MOTION PRO Steering Head Bearing Race Driver — Blue anodized

Fits tapered steering bearing races 41–42 mm, 47–48 mm, 51–52 mm and 55–56 mm; installs races safely with double-sided drivers and an ergonomic handle.

€41.78 €56.56

Bearing Driver Set — 12–25 mm ID, 32–47 mm OD, Blue anodized

-€26.49

MOTION PRO Bearing Driver Set — 12–25 mm ID, 32–47 mm OD, Blue anodized

Quick-change adapters for 12–25 mm ID and 32–47 mm OD bearings. Reinforced handle and treated drivers. Includes protective case.

€74.84 €101.33

-€8.73

MOTION PRO Gasket Scraper — Aluminum engine case, Blue anodized

Brass and steel blades included; narrow slant-cut design for tight areas; ergonomic handle with blade storage.

€24.67 €33.40

Steering Stem Bearing Tool — Steering stem, Blue anodized

-€48.41

MOTION PRO Steering Stem Bearing Tool — Steering stem, Blue anodized

Protects the steering stem during bearing removal and installation. Includes 26 mm, 28 mm, 30-31 mm and 35-36 mm race protectors. Compact design fits within steering stops. Laser etched for easy identification. Made in the USA.

€136.82 €185.23

-€4.74

MOTION PRO Gasket Scraper Replacement Blades — Set of 2, Steel/Brass

Narrow angled blades for small, thin engine cases; easily sharpened; replacement blades for compatible gasket scrapers.

€13.36 €18.10

Steering Stem Bearing Tool — Fits most Harley-Davidson motorcycles, Black oxide

-€15.97

MOTION PRO Steering Stem Bearing Tool — Fits most Harley-Davidson...

Removes and installs tapered roller bearings at the base of the steering stem. Fits within lower triple clamp steering stops and suits most Harley-Davidson motorcycles with tapered roller bearings.

€45.13 €61.10

Fork Cap Tool for Showa — 50 mm fork cap, 1/2" square drive, Blue anodized

-€12.72

MOTION PRO Fork Cap Tool for Showa — 50 mm fork cap, 1/2" square drive,...

Tool for removing Showa twin-chamber fork caps and compression cartridges; outer ring fits 50 mm octagonal caps and can be clamped in a vise.

€35.93 €48.65

Fork Cap Socket — 19 mm hex, WP 4860 4CS fork fit, fits '14 KTM XC and '13–'14 Husaberg, blue anodized

-€7.98

MOTION PRO Fork Cap Socket — 19 mm hex, WP 4860 4CS fork fit, fits '14...

Fits '14 KTM XC and all '13–'14 Husaberg with WP 4860 4CS fork. 19 mm hex head for removing and installing left- and right-hand adjustable fork caps; enables proper torque during installation.

€22.57 €30.55

22 mm Showa SFF Air Fork Hex Tool — 22 mm, Blue anodized

-€4.59

MOTION PRO 22 mm Showa SFF Air Fork Hex Tool — 22 mm, Blue anodized

Precision tool for removing the lower sealing bolt on Showa SFF front suspension. Non-marking finish; made in the USA.

€12.95 €17.54

Spark Plug Gap Tool — 0.5–1.0 mm gauges, Blue anodized

-€4.57

MOTION PRO Spark Plug Gap Tool — 0.5–1.0 mm gauges, Blue anodized

Compact gauge for checking and setting spark plug gaps; includes 0.5–1.0 mm gauges and a built-in bottle opener.

€12.90 €17.47

Shock Spring Compressor — 56–96 mm collar range, clevis 35 mm, eyelet 17 mm, Blue anodized

-€50.23

MOTION PRO Shock Spring Compressor — 56–96 mm collar range, clevis 35 mm,...

Compact shock spring compressor that safely removes springs on most coilover shocks. Adapter plates fit 56–96 mm retaining collars; includes clevis and eyelet adapters.

€141.97 €192.20

-€2.22

MOTION PRO Sealmate Fork Seal Cleaner — Blue

Extracts dirt trapped behind fork seals to help maintain smooth fork operation. Works on conventional and upside-down forks.

€6.27 €8.49

U-Joint Press Tool — U-Joint, Black oxide, Metric

-€39.27

MOTION PRO U-Joint Press Tool — U-Joint, Black oxide, Metric

Includes 16 mm, 22 mm and 27 mm adapters and 16 mm & 20 mm hardened drive tips; floating press plate for easy U-joint service.

€110.99 €150.26

-€8.73

MOTION PRO 5 in 1 Damper Rod Bleed Tool — 5-in-1, blue anodized

Five thread sizes in one compact tool for clean, efficient damper rod bleeding.

€24.67 €33.40

-€49.32

TECHNORESEARCH O2 Instal Block — Aluminum

O2 wideband sensor sampling block with vent screw for reliable service access.

€191.83 €241.15

-€1.85

TECHNORESEARCH O2 Instal Block — TR200055

Compact sampling block for wideband O2 sensors with vent screw for pressure equalization.

€7.19 €9.04

-€2.40

WERA Insulated Screwdriver — 1000 V, orange

VDE-insulated blades rated for 1,000 V; ergonomic multi-material handle with hard and soft zones; color-coded tool finder; hexagonal anti-roll; reduced shaft diameter.

€5.88 €8.28

-€2.72

WERA Insulated Screwdriver — 1000 V, Orange, Red

VDE-insulated screwdriver rated to 1000 V with multi-component grip, anti-roll hexagon and reduced shaft for tight access.

€6.63 €9.35

-€3.46

WERA Insulated Screwdriver — Orange

Insulated VDE blades for work up to 1000 volts; smooth hard and soft grip zones, Take ist easy color coding, hexagonal anti-roll and reduced shaft diameter.

€8.48 €11.94

-€4.69

WERA Insulated Screwdriver — Orange

VDE-insulated blades rated for 1,000 V.
Multi-zone handle for fast turning and high torque transfer.
Color-coded end caps and hexagonal anti-roll feature.
Reduced shaft diameter for tight access.

€11.45 €16.14

-€2.07

WERA Insulated Screwdriver — 05006170001, Orange

Insulated VDE blades rated to 1000 volts. Smooth hard zones for speed and soft grip zones for torque transfer. Hexagonal anti-roll and reduced shaft diameter for precise work.

€5.05 €7.12

WERA Insulated Screwdriver

The Insulated Screwdriver features VDE blades for safe use at 1000 volts, ergonomic grip zones for torque transfer, and an anti-roll design.

€5.40

-€4.40

WERA Insulated Nutdriver — 8 mm, orange, red

Insulated nutdriver with VDE blades rated to 1000 volts, multi‑component handle for high torque transfer, handle markings and hexagonal anti‑roll feature.

€10.74 €15.14

-€1.48

MOTION PRO Fork Seal Bullet — 49 mm fork leg, Gray

Protects the fork seal and wiper from bushing-groove damage during installation. Eliminates the need to wrap the fork tube with tape, saving time.

€4.17 €5.65

-€4.85

WERA Insulated Nutdriver — 9 mm, orange

VDE-insulated blades rated to 1000 V; multi-density handle with hard and soft zones for speed and torque; hexagonal anti-roll feature; zinc phosphate plated.

€11.84 €16.69

Ringer® Fork Seal Driver — for 49 mm fork leg

-€14.78

MOTION PRO Ringer® Fork Seal Driver — for 49 mm fork leg

Locking ring with knurled finish for a secure, no-slip grip; innovative pin-free alignment; protective black e-coat with laser markings; perfectly weighted for consistent seal installation; limited lifetime warranty.

€41.78 €56.56

-€5.27

WERA Insulated Nutdriver — 10 mm

Insulated VDE blades rated to 1,000 volts. Multi-component Kraftform handle with anti-roll hex and zinc phosphate plated finish.

€12.90 €18.17

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS