TOOLS (4)

-€41.01

JIMS Shift Fork Gauge — Drum-type shifter, 4-speed, black

Checks alignment of Big Twin transmission shift forks. Made in the U.S.A.

€159.45 €200.46

$Bungee Net — 38 cm (15\"), Black$

-€0.85

EMGO Bungee Net — 38 cm (15\"), Black

Holds gear securely for travel and hauling.
Expands for flexible coverage.
Six coated hooks protect finishes.

€2.40 €3.25

-€0.87

EMGO Bungee Net — 38 cm (15 in), red

Versatile bungee net that stretches to secure loads, featuring six coated non-abrasive hooks.

€2.44 €3.31

-€0.87

EMGO Bungee Net — 15" (38 cm) square, S Hook

Versatile cargo net stretches to over twice its original square size and includes six coated, non-abrasive hooks.

€2.44 €3.31

-€16.98

JIMS Cam Chain Tensioner Tool — Cam

Unloads pressure on primary and secondary chain tensioners for easier cam assembly and disassembly. Includes instructions. Made in the U.S.A.

€66.05 €83.03

Fork Cap Wrench — WP, fork compression valve, anodized brass

-€6.73

SCAR Fork Cap Wrench — WP, fork compression valve, anodized brass

Specialty wrench for removing and installing fork caps; compatible with many Kayaba and Showa forks.

€19.02 €25.75

-€61.99

JIMS Camshaft Removal/Installation Tool — Front, Rear

Multi-function tool for removing and installing front and rear camshafts and ball bearings on Twin Cam 88 engines. Made in the U.S.A.

€241.08 €303.07

Sprocket Lock Tool — Crankshaft, Camshaft, Black

-€17.78

JIMS Sprocket Lock Tool — Crankshaft, Camshaft, Black

Locks camshaft and crankshaft sprockets for safe removal, replacement, and torquing of sprocket bolts. Includes instructions. Made in the U.S.

€69.16 €86.94

-€14.29

JIMS Wrist Pin Bushing — Standard, pair

Precision bronze wrist pin bushings machined to hold concentricity to less than .0002" with a lead-in edge for easy installation.

€55.57 €69.86

-€28.57

JIMS Clutch Hub Puller — Clutch hub, Black

Works on Big Twin sprockets, alternator covers and early XL clutches. Fits 3-, 5-, 10-finger and 45" hubs. Made in the U.S.A.

€111.14 €139.71

-€26.97

JIMS Top Nut Fork Socket — 35 mm

Tool for removing and installing top fork nuts; rubber-protected socket, clears most handlebars.

€104.89 €131.86

Balancer Shaft Bearing Remover — Kit, Black

-€48.93

JIMS Balancer Shaft Bearing Remover — Kit, Black

Safe, damage-free removal of balancer shaft bearings; pushes on the bearing outer diameter; removes bearings from the "B" motor case in one smooth motion; made in the USA.

€190.26 €239.19

-€7.81

JIMS Balancer Shaft Retention Pins — Flywheel assembly, silver

Locks into balancer shaft sprocket pinholes to prevent the balancer from turning out of sync with the flywheel. Use when servicing the flywheel assembly. Made in the U.S.A.

€30.39 €38.20

-€28.78

JIMS Piston Support Plate — JIMS 1164, Black

Non-marring flat plate for pushing piston bottoms during ring or cylinder installation. Made in the U.S.A.

€111.93 €140.71

Compression Release Valve Installation Kit — Engine case fit

-€142.45

JIMS Compression Release Valve Installation Kit — Engine case fit

Complete kit to drill, spot face, tap and install compression release valves on front and rear heads; fits big-inch and high-compression Twin Cams.

€553.95 €696.40

-€73.52

JIMS Wrist Pin Bushing Reaming Tool — Wrist pin, 1726-1

Reams wrist pin bushings to the specified inner diameter. Can be used with rods in or out of the motor. Lead-in taper for easy use. Made in the U.S.A.

€285.92 €359.44

Inner Cam Bearing Go and No-Go Gauges — pair, silver

-€21.59

JIMS Inner Cam Bearing Go and No-Go Gauges — pair, silver

Fast, accurate Go/No‑Go gauges to check the inside diameter of inner cam bearings. Use them to confirm whether the cam will be too loose or too tight. Made in the U.S.A.

€68.14 €89.73

-€26.87

JIMS Fork Seal and Cap Installer — 41 mm fork tube, black

Installs fork and dust seals; lightly grease before use. Made in the U.S.A.

€104.50 €131.37

-€21.50

JIMS Fork Nut Socket — JIMS, Black

Removes and installs the top fork-tube plug; fits 41 mm forks. Made in the U.S.A.

€83.63 €105.13

Hardware Organizer M8 — Blue, powder-coated

-€27.75

JIMS Hardware Organizer M8 — Blue, powder-coated

Milwaukee Eight specific hardware index tools to store and organize bolts during disassembly. Can be placed on its side for Loctite application. Magnetic storage captures slip-fit dowels. Made in the USA.

€107.92 €135.67

Exhaust Stud Drill Plate — Blue, anodized

-€40.00

JIMS Exhaust Stud Drill Plate — Blue, anodized

Positions exhaust port seals evenly and works with exhaust flange nuts. Made in the U.S.A.

€155.56 €195.56

Head Bolt Torque Gauge — Torque plate, head bolt application, blue

-€6.19

JIMS Head Bolt Torque Gauge — Torque plate, head bolt application,...

Accurate gauge for measuring 90° when tightening head bolts. Laser-engraved torquing sequence; fits Twin Cam and Evolution engines; made in the U.S.A.

€24.07 €30.26

-€96.27

JIMS Hardware Organizer M8 — Blue

Milwaukee Eight specific hardware index tools that store and organize bolts during disassembly. Side-mountable to aid Loctite application. Magnetic storage captures slip-fit dowels. Made in the USA.

€374.39 €470.66

-€52.24

JIMS Inner Cam Bearing Installation Tool — Right, Black

Presses inner cam bearings to the correct depth for accurate seating. Made in the U.S.A.

€203.16 €255.40

-€38.71

JIMS Clutch Spring Compressor Tool — Blue

Releases the clutch spring for easy retainer ring removal and installation. Made in the USA.

€150.53 €189.24

-€22.12

JIMS Clutch Spring Compressor Nut — Black

Tool for releasing the clutch spring; enables easy retainer ring removal and installation. Made in the USA.

€62.53 €84.65

-€33.12

JIMS Snap Ring Tool — Timken® bearing, black

Tool for removing and installing outer race snap rings on tapered roller bearings. Essential for OEM and aftermarket case ring replacements. Made in the U.S.A.

€128.78 €161.90

-€5.67

CUSTOM DYNAMICS LED Road Flare Safety Light — Emergency, Clear, Red

Compact LED road flare with a 360° beacon, three emergency modes, built-in hook and rear magnet. Requires 3 AAA batteries (sold separately).

€22.01 €27.68

Tappet Block Alignment Tool — Crankcase, Black

-€7.15

JIMS Tappet Block Alignment Tool — Crankcase, Black

Precision tool for aligning the crankcase oil hole to the tappet block; also used for Evolution head rocker box bases and Harley-Davidson® Twin Cam oil pump alignment. Made in the U.S.A.

€27.78 €34.93

Transmission Shaft Installer — 5-Speed, Black

-€30.16

JIMS Transmission Shaft Installer — 5-Speed, Black

Installs shafts without the use of a hydraulic or arbor press. Made in the U.S.A.

€117.28 €147.44

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company