TOOLS (4)

-€2.40

WERA Insulated Screwdriver — 1000 V, orange

VDE-insulated blades rated for 1,000 V; ergonomic multi-material handle with hard and soft zones; color-coded tool finder; hexagonal anti-roll; reduced shaft diameter.

€5.88 €8.28

-€47.77

JIMS Swingarm Bearing Installer — Black

Tool kit installs drive- and brake-side swingarm bearings set at different depths and includes a remover to press the spacer out of the bearing. Made in the U.S.A.

€185.76 €233.53

-€29.85

JIMS Clutch Hub Puller — Clutch hub, Black, Silver

Removes wet and dry clutch hubs without removing the clutch release rod; four bolts included for dry clutch removal; made in the U.S.A.

€116.08 €145.93

-€2.72

WERA Insulated Screwdriver — 1000 V, Orange, Red

VDE-insulated screwdriver rated to 1000 V with multi-component grip, anti-roll hexagon and reduced shaft for tight access.

€6.63 €9.35

-€6.35

JIMS Fork Cap Allen Socket — Silver

Large hex-head tool for disassembling updated top covers on Harley-Davidson® touring models with 49 mm forks. Made in the USA.

€24.69 €31.04

-€3.46

WERA Insulated Screwdriver — Orange

Insulated VDE blades for work up to 1000 volts; smooth hard and soft grip zones, Take ist easy color coding, hexagonal anti-roll and reduced shaft diameter.

€8.48 €11.94

-€4.69

WERA Insulated Screwdriver — Orange

VDE-insulated blades rated for 1,000 V.
Multi-zone handle for fast turning and high torque transfer.
Color-coded end caps and hexagonal anti-roll feature.
Reduced shaft diameter for tight access.

€11.45 €16.14

-€41.01

JIMS Shift Fork Gauge — Drum-type shifter, 4-speed, black

Checks alignment of Big Twin transmission shift forks. Made in the U.S.A.

€159.45 €200.46

-€2.07

WERA Insulated Screwdriver — 05006170001, Orange

Insulated VDE blades rated to 1000 volts. Smooth hard zones for speed and soft grip zones for torque transfer. Hexagonal anti-roll and reduced shaft diameter for precise work.

€5.05 €7.12

WERA Insulated Screwdriver

The Insulated Screwdriver features VDE blades for safe use at 1000 volts, ergonomic grip zones for torque transfer, and an anti-roll design.

€5.40

-€4.40

WERA Insulated Nutdriver — 8 mm, orange, red

Insulated nutdriver with VDE blades rated to 1000 volts, multi‑component handle for high torque transfer, handle markings and hexagonal anti‑roll feature.

€10.74 €15.14

-€4.85

WERA Insulated Nutdriver — 9 mm, orange

VDE-insulated blades rated to 1000 V; multi-density handle with hard and soft zones for speed and torque; hexagonal anti-roll feature; zinc phosphate plated.

€11.84 €16.69

-€5.27

WERA Insulated Nutdriver — 10 mm

Insulated VDE blades rated to 1,000 volts. Multi-component Kraftform handle with anti-roll hex and zinc phosphate plated finish.

€12.90 €18.17

-€5.65

WERA Insulated Nutdriver — 11 mm, Orange

Insulated nutdriver with VDE-rated blades for safe work up to 1000 volts. Multi-component handle provides secure grip for both high-speed turning and high-torque transfer. Hexagonal anti-roll design and zinc phosphate plating enhance durability.

€13.80 €19.45

-€6.47

WERA Insulated Nutdriver — 12 mm, Orange

VDE-insulated blades rated to 1000 V
Kraftform multi-component handle for speed and torque
Handle markings for quick identification
Hexagonal anti-roll feature
Zinc phosphate plated finish

€15.84 €22.31

-€61.99

JIMS Camshaft Removal/Installation Tool — Front, Rear

Multi-function tool for removing and installing front and rear camshafts and ball bearings on Twin Cam 88 engines. Made in the U.S.A.

€241.08 €303.07

-€7.29

WERA Insulated Nutdriver — 13 mm, Orange, Red

VDE-insulated nutdriver rated for 1000 volts with ergonomic grip zones, anti-roll feature and corrosion-resistant plating.

€17.80 €25.09

Sprocket Lock Tool — Crankshaft, Camshaft, Black

-€17.78

JIMS Sprocket Lock Tool — Crankshaft, Camshaft, Black

Locks camshaft and crankshaft sprockets for safe removal, replacement, and torquing of sprocket bolts. Includes instructions. Made in the U.S.

€69.16 €86.94

Insulated adj. Torque handle — Torque wrench, Adjustable, Orange, Red

-€32.42

WERA Insulated adj. Torque handle — Torque wrench, Adjustable,...

Adjustable insulated torque handle. Torque range 0.3–1.2. Audible and tactile signal at preset torque. Fits Kraftform Kompakt VDE blades; quick blade change.

€79.24 €111.66

-€14.29

JIMS Wrist Pin Bushing — Standard, pair

Precision bronze wrist pin bushings machined to hold concentricity to less than .0002" with a lead-in edge for easy installation.

€55.57 €69.86

-€28.57

JIMS Clutch Hub Puller — Clutch hub, Black

Works on Big Twin sprockets, alternator covers and early XL clutches. Fits 3-, 5-, 10-finger and 45" hubs. Made in the U.S.A.

€111.14 €139.71

-€26.97

JIMS Top Nut Fork Socket — 35 mm

Tool for removing and installing top fork nuts; rubber-protected socket, clears most handlebars.

€104.89 €131.86

Balancer Shaft Bearing Remover — Kit, Black

-€48.93

JIMS Balancer Shaft Bearing Remover — Kit, Black

Safe, damage-free removal of balancer shaft bearings; pushes on the bearing outer diameter; removes bearings from the "B" motor case in one smooth motion; made in the USA.

€190.26 €239.19

-€7.81

JIMS Balancer Shaft Retention Pins — Flywheel assembly, silver

Locks into balancer shaft sprocket pinholes to prevent the balancer from turning out of sync with the flywheel. Use when servicing the flywheel assembly. Made in the U.S.A.

€30.39 €38.20

-€28.78

JIMS Piston Support Plate — JIMS 1164, Black

Non-marring flat plate for pushing piston bottoms during ring or cylinder installation. Made in the U.S.A.

€111.93 €140.71

Compression Release Valve Installation Kit — Engine case fit

-€142.45

JIMS Compression Release Valve Installation Kit — Engine case fit

Complete kit to drill, spot face, tap and install compression release valves on front and rear heads; fits big-inch and high-compression Twin Cams.

€553.95 €696.40

Inner Cam Bearing Go and No-Go Gauges — pair, silver

-€21.59

JIMS Inner Cam Bearing Go and No-Go Gauges — pair, silver

Fast, accurate Go/No‑Go gauges to check the inside diameter of inner cam bearings. Use them to confirm whether the cam will be too loose or too tight. Made in the U.S.A.

€68.14 €89.73

-€1.72

SW-MOTECH Multi Tool Keychain — Silver, Brushed

Compact multi-function key accessory with bottle opener, quick-release fastener opener for EVO and PRO side carriers, and hex keys in 14, 8, 10, 12 and 13 mm. Laser-etched logo.

€6.68 €8.40

-€26.87

JIMS Fork Seal and Cap Installer — 41 mm fork tube, black

Installs fork and dust seals; lightly grease before use. Made in the U.S.A.

€104.50 €131.37

-€21.50

JIMS Fork Nut Socket — JIMS, Black

Removes and installs the top fork-tube plug; fits 41 mm forks. Made in the U.S.A.

€83.63 €105.13

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company