TOOLS (4)

-€28.78

JIMS Piston Support Plate — JIMS 1164, Black

Non-marring flat plate for pushing piston bottoms during ring or cylinder installation. Made in the U.S.A.

€111.93 €140.71

Compression Release Valve Installation Kit — Engine case fit

-€142.45

JIMS Compression Release Valve Installation Kit — Engine case fit

Complete kit to drill, spot face, tap and install compression release valves on front and rear heads; fits big-inch and high-compression Twin Cams.

€553.95 €696.40

Inner Cam Bearing Go and No-Go Gauges — pair, silver

-€21.59

JIMS Inner Cam Bearing Go and No-Go Gauges — pair, silver

Fast, accurate Go/No‑Go gauges to check the inside diameter of inner cam bearings. Use them to confirm whether the cam will be too loose or too tight. Made in the U.S.A.

€68.14 €89.73

-€26.87

JIMS Fork Seal and Cap Installer — 41 mm fork tube, black

Installs fork and dust seals; lightly grease before use. Made in the U.S.A.

€104.50 €131.37

-€21.50

JIMS Fork Nut Socket — JIMS, Black

Removes and installs the top fork-tube plug; fits 41 mm forks. Made in the U.S.A.

€83.63 €105.13

Hardware Organizer M8 — Blue, powder-coated

-€27.75

JIMS Hardware Organizer M8 — Blue, powder-coated

Milwaukee Eight specific hardware index tools to store and organize bolts during disassembly. Can be placed on its side for Loctite application. Magnetic storage captures slip-fit dowels. Made in the USA.

€107.92 €135.67

Exhaust Stud Drill Plate — Blue, anodized

-€40.00

JIMS Exhaust Stud Drill Plate — Blue, anodized

Positions exhaust port seals evenly and works with exhaust flange nuts. Made in the U.S.A.

€155.56 €195.56

Head Bolt Torque Gauge — Torque plate, head bolt application, blue

-€6.19

JIMS Head Bolt Torque Gauge — Torque plate, head bolt application,...

Accurate gauge for measuring 90° when tightening head bolts. Laser-engraved torquing sequence; fits Twin Cam and Evolution engines; made in the U.S.A.

€24.07 €30.26

-€96.27

JIMS Hardware Organizer M8 — Blue

Milwaukee Eight specific hardware index tools that store and organize bolts during disassembly. Side-mountable to aid Loctite application. Magnetic storage captures slip-fit dowels. Made in the USA.

€374.39 €470.66

-€52.24

JIMS Inner Cam Bearing Installation Tool — Right, Black

Presses inner cam bearings to the correct depth for accurate seating. Made in the U.S.A.

€203.16 €255.40

-€22.12

JIMS Clutch Spring Compressor Nut — Black

Tool for releasing the clutch spring; enables easy retainer ring removal and installation. Made in the USA.

€62.53 €84.65

-€33.12

JIMS Snap Ring Tool — Timken® bearing, black

Tool for removing and installing outer race snap rings on tapered roller bearings. Essential for OEM and aftermarket case ring replacements. Made in the U.S.A.

€128.78 €161.90

Tappet Block Alignment Tool — Crankcase, Black

-€7.15

JIMS Tappet Block Alignment Tool — Crankcase, Black

Precision tool for aligning the crankcase oil hole to the tappet block; also used for Evolution head rocker box bases and Harley-Davidson® Twin Cam oil pump alignment. Made in the U.S.A.

€27.78 €34.93

Transmission Shaft Installer — 5-Speed, Black

-€30.16

JIMS Transmission Shaft Installer — 5-Speed, Black

Installs shafts without the use of a hydraulic or arbor press. Made in the U.S.A.

€117.28 €147.44

-€23.66

JIMS Steering Head Bearing Race Installer — Black

Installs steering head bearing races and frame cups straight and without damage; made in the U.S.A.

€92.01 €115.67

-€87.73

JIMS Sprocket Shaft Bearing Remover — Sprocket shaft, Black

Removes Timken® bearings on late '86–'02 Big Twins; durable U.S.-made construction.

€341.16 €428.89

-€51.82

JIMS Main Drive Gear Bearing Removal Tool — 5-Speed, Blue, Silver

Removes old bearings straight without damaging the transmission case; usable without removing the transmission from the bike. Made in the U.S.A.

€201.53 €253.35

Driver Handle — Main drive gear, 5-speed, Blue anodized

-€33.92

JIMS Driver Handle — Main drive gear, 5-speed, Blue anodized

Installs main drive gear oil seal to correct depth with transmission assembled; includes protective sleeve; made in the U.S.A.

€131.92 €165.84

Tappet Oil Filter Screw Plug Tool — Black

-€10.19

JIMS Tappet Oil Filter Screw Plug Tool — Black

Removes tappet oil screen without removing the exhaust. Used to extract the tappet oil screen plug. Made in the U.S.A.

€39.65 €49.84

Shouldered Valve Guide Driver Set — 3/8", 1/32", 5/16" set, black/silver/yellow

-€15.27

JIMS Shouldered Valve Guide Driver Set — 3/8", 1/32", 5/16" set,...

Three-piece shouldered valve guide driver set (3/8", 1/32", 5/16") for guide removal and installation; made in the U.S.A.

€59.39 €74.66

-€42.29

JIMS Electronic Speedometer Sensor — JIMS, 74437-96

Top-quality replacement speedometer sensor. Fits aftermarket transmission cases with a speedometer sensor hole. Includes O-ring, hardware and OEM connector. Made in the U.S.A.

€164.48 €206.77

Tuff Jug Container with Ripper Cap — 10.2 L (2.7 US gal), White

-€10.33

TUFF JUG Tuff Jug Container with Ripper Cap — 10.2 L (2.7 US gal), White

Prevents sliding and spills in truck beds. Fast-flow ripper cap and view strip for easy level checks.

€29.19 €39.52

Flexible Fast Flow Spout for Tuff Jug Container — fits 5.3 US gal Tuff Jug

-€2.81

TUFF JUG Flexible Fast Flow Spout for Tuff Jug Container — fits 5.3 US...

Internally vented spout that provides fast flow with auto shut-off. Fits 5.3 US gal Tuff Jug containers.

€7.91 €10.72

Replacement Ripper Cap for 2.7 US Gal Tuff Jug Container — 2.7 US gal fit, Red

-€7.92

TUFF JUG Replacement Ripper Cap for 2.7 US Gal Tuff Jug Container — 2.7...

Replacement ripper cap for fast, low-spill fluid transfer with 2.7 US gal containers.

€22.40 €30.32

-€7.92

TUFF JUG Replacement Ripper Cap for 5 US gal Tuff Jug Container — Red

Replacement ripper cap for fast, low-spill transfer with 5 US gal containers.

€22.40 €30.32

Replacement Ripper Cap for 2.7 US Gal Tuff Jug Container — 2.7 US gal, Orange

-€7.92

TUFF JUG Replacement Ripper Cap for 2.7 US Gal Tuff Jug Container — 2.7...

Fast-flowing replacement cap for quick, spill-resistant fluid transfer. Easy to install and remove.

€22.40 €30.32

Replacement Ripper Cap for 5 US Gal Tuff Jug Container — 5 US gal, orange

-€7.92

TUFF JUG Replacement Ripper Cap for 5 US Gal Tuff Jug Container — 5 US...

Fast-flowing replacement cap for compatible utility jugs; twist-on installation reduces spills and provides a secure seal.

€22.40 €30.32

-€7.92

TUFF JUG Replacement Ripper Cap for 2.7 US Gal Tuff Jug Container — Blue

Fast-flowing replacement cap for 2.7 US gal containers.

€22.40 €30.32

-€7.92

TUFF JUG Replacement Ripper Cap for 5 US Gal Tuff Jug Container — Blue

Fast-flowing cap for five-gallon utility jugs; steady pour with tool-free installation.

€22.40 €30.32

Replacement Ripper Cap for 2.7 US Gal Tuff Jug Container — 2.7 US gal, Green

-€7.92

TUFF JUG Replacement Ripper Cap for 2.7 US Gal Tuff Jug Container — 2.7...

Replacement cap that delivers fast, low-drip fluid transfer and simple snap-on installation.

€22.40 €30.32

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS