TOOLS (4)

Clutch Adjuster Nut Tool — 11/16" clutch adjuster lock nut, fits '98 and later Big Twin Harley-Davidson models, black

-€4.38

MOTION PRO Clutch Adjuster Nut Tool — 11/16" clutch adjuster lock nut,...

Through-hole design holds the clutch adjuster screw while tightening the 11/16" lock nut; deep socket fits into the clutch basket; compact for saddlebags. Not for hydraulic clutches.

€12.40 €16.78

Crankshaft Puller — 25 mm & 40 mm adapters, M10x1.25/M12x1.25, Blue anodized

-€27.07

MOTION PRO Crankshaft Puller — 25 mm & 40 mm adapters, M10x1.25/M12x1.25,...

Precision crankshaft puller with 25 mm and 40 mm adapters and reversible M10x1.25/M12x1.25 studs for fast, accurate installs.

€76.48 €103.55

Countershaft Seal Puller — 29–47 mm, black

-€20.11

MOTION PRO Countershaft Seal Puller — 29–47 mm, black

Removes countershaft seals 29–47 mm without damaging engine cases. Designed for off-road, street and ATV engines.

€56.88 €76.99

T-6 Valve Spring Compressor — 24 mm, Blue anodized

-€38.67

MOTION PRO T-6 Valve Spring Compressor — 24 mm, Blue anodized

Quick-release, fully adjustable valve spring compressor compatible with most motorcycle, ATV, UTV, and small engine cylinder heads.

€109.28 €147.95

-€22.46

JIMS Wrist Pin Adapter — wrist pin, gray

Removes wrist pins from Milwaukee-Eight® engines
Accessory for JIMS® Wrist Pin Tool (DS-196197)
Made in the U.S.A.

€87.34 €109.80

-€84.85

JIMS Milwaukee-Eight® Cam Bearing Tool — Black

Precision tool for camshaft inner needle bearing installation with tighter tolerances for accurate depth. Proven remover collet and fine-threaded installation driver. Made in the U.S.A.

€329.98 €414.83

-€20.62

JIMS Valve Spring Collar — Adapter, Black, Part 5808

Allows an existing compressor to remove smaller valves on M8 engines. For use with JIMS® Valve Spring Compressor Tool (PART# DS-196013). Made in the U.S.A.

€80.18 €100.80

-€22.64

JIMS Cylinder Hold Down Nuts — Blue, fits Twin Cam and Milwaukee Eight

Hold-down nuts for securing the cylinder during head removal; one end fits Twin Cam, the other fits Milwaukee Eight. Made in the U.S.A.

€88.03 €110.67

-€4.14

MOTION PRO Torx Bit Set — T25/T30, T40/T45, 1/4" drive fit

Rubber O-ring secures double-ended Torx bits. Sizes T25/T30 and T40/T45. Fits 1/4" drive with 5/16" socket or 5/16" T-handle. Compatible with Motion Pro MP08-161.

€11.69 €15.83

-€26.42

JIMS Main Seal Installer/Remover — JIMS, Part No. 5810

Tool for installing and removing the main crankshaft seal on Milwaukee Eight engines.

€102.75 €129.17

Pro Spark Plug Socket — 21.55 mm (0.848"), 3/8" square drive / 17 mm wrench

-€8.56

MOTION PRO Pro Spark Plug Socket — 21.55 mm (0.848"), 3/8" square drive /...

Internal retention system, easy-to-read laser-etched markings, slim skeleton profile, lightweight, lifetime limited warranty.

€24.23 €32.79

Pro Spark Plug Socket — 17 mm, 3/8" drive, Black oxide

-€8.56

MOTION PRO Pro Spark Plug Socket — 17 mm, 3/8" drive, Black oxide

Slim, durable spark plug socket with internal retention, laser-etched markings, protective black oxide coating, and lifetime limited warranty.

€24.23 €32.79

Pro Spark Plug Socket — 27.25 mm, Black oxide

-€8.56

MOTION PRO Pro Spark Plug Socket — 27.25 mm, Black oxide

Innovative plug-retention spark plug socket with slim skeleton profile and laser-etched markings; fits 3/8" drive or 17 mm wrench. Lifetime limited warranty.

€24.23 €32.79

$Stepped Swivel Socket Extension — 76.2 mm (3\"), Chrome, Spark plug$

-€3.85

MOTION PRO Stepped Swivel Socket Extension — 76.2 mm (3\"), Chrome, Spark...

Swivel socket extension works with Phillips screwdrivers, 1/4\" ratchets or drivers, and 14 mm wrenches; tilts up to 15° for tight access.

€10.85 €14.70

-€3.08

DRAG SPECIALTIES Clear Timing Hole Plug — 41.3 mm (1-5/8"), timing mark

Locates the timing mark without getting an eye full of oil.

€8.72 €11.80

-€2.43

DRAG SPECIALTIES Oil Filter Wrench — Black, Steel, Metric

Fits 74 mm ID, 15-flute stepped S&S oil filters; 3/8" square drive; also fits filter part #0712-0648.

€6.89 €9.32

-€10.27

MOTION PRO Flywheel Puller Internal Thread with Protector — M28 x 1.0, Black

For removal of flywheels and rotors
Includes protector; right-hand thread
Heat treated for strength; lifetime limited warranty

€29.06 €39.33

-€213.23

JIMS Cylinder Torque Plate Kit — 3.937"–4" bore, black

Required when boring or honing late-model aluminum cylinders; simulates running stress; includes instructions; made in the U.S.A.

€829.24 €1,042.47

Hose Removal Tool — Cooling system, fuel system, Black, Blue

-€7.25

MOTION PRO Hose Removal Tool — Cooling system, fuel system, Black, Blue

Makes hose removal safer and easier while protecting fittings and nearby components.

€20.48 €27.73

-€35.90

MOTION PRO T-6 Valve Spring Compressor — 18 mm, 24 mm, Blue

Compact valve spring compressor for motorcycle, ATV, UTV, and small engine cylinder heads. Quick-release action, fully adjustable, includes fork-style tip for fast, safe service.