TOOLS (4)

Compression Release Valve Installation Kit — Engine case fit

-€142.45

JIMS Compression Release Valve Installation Kit — Engine case fit

Complete kit to drill, spot face, tap and install compression release valves on front and rear heads; fits big-inch and high-compression Twin Cams.

€553.95 €696.40

Inner Cam Bearing Go and No-Go Gauges — pair, silver

-€21.59

JIMS Inner Cam Bearing Go and No-Go Gauges — pair, silver

Fast, accurate Go/No‑Go gauges to check the inside diameter of inner cam bearings. Use them to confirm whether the cam will be too loose or too tight. Made in the U.S.A.

€68.14 €89.73

-€26.87

JIMS Fork Seal and Cap Installer — 41 mm fork tube, black

Installs fork and dust seals; lightly grease before use. Made in the U.S.A.

€104.50 €131.37

-€21.50

JIMS Fork Nut Socket — JIMS, Black

Removes and installs the top fork-tube plug; fits 41 mm forks. Made in the U.S.A.

€83.63 €105.13

Hardware Organizer M8 — Blue, powder-coated

-€27.75

JIMS Hardware Organizer M8 — Blue, powder-coated

Milwaukee Eight specific hardware index tools to store and organize bolts during disassembly. Can be placed on its side for Loctite application. Magnetic storage captures slip-fit dowels. Made in the USA.

€107.92 €135.67

Head Bolt Torque Gauge — Torque plate, head bolt application, blue

-€6.19

JIMS Head Bolt Torque Gauge — Torque plate, head bolt application,...

Accurate gauge for measuring 90° when tightening head bolts. Laser-engraved torquing sequence; fits Twin Cam and Evolution engines; made in the U.S.A.

€24.07 €30.26

-€96.27

JIMS Hardware Organizer M8 — Blue

Milwaukee Eight specific hardware index tools that store and organize bolts during disassembly. Side-mountable to aid Loctite application. Magnetic storage captures slip-fit dowels. Made in the USA.

€374.39 €470.66

-€52.24

JIMS Inner Cam Bearing Installation Tool — Right, Black

Presses inner cam bearings to the correct depth for accurate seating. Made in the U.S.A.

€203.16 €255.40

-€22.12

JIMS Clutch Spring Compressor Nut — Black

Tool for releasing the clutch spring; enables easy retainer ring removal and installation. Made in the USA.

€62.53 €84.65

-€33.12

JIMS Snap Ring Tool — Timken® bearing, black

Tool for removing and installing outer race snap rings on tapered roller bearings. Essential for OEM and aftermarket case ring replacements. Made in the U.S.A.

€128.78 €161.90

Tappet Block Alignment Tool — Crankcase, Black

-€7.15

JIMS Tappet Block Alignment Tool — Crankcase, Black

Precision tool for aligning the crankcase oil hole to the tappet block; also used for Evolution head rocker box bases and Harley-Davidson® Twin Cam oil pump alignment. Made in the U.S.A.

€27.78 €34.93

Transmission Shaft Installer — 5-Speed, Black

-€30.16

JIMS Transmission Shaft Installer — 5-Speed, Black

Installs shafts without the use of a hydraulic or arbor press. Made in the U.S.A.

€117.28 €147.44

-€23.66

JIMS Steering Head Bearing Race Installer — Black

Installs steering head bearing races and frame cups straight and without damage; made in the U.S.A.

€92.01 €115.67

-€87.73

JIMS Sprocket Shaft Bearing Remover — Sprocket shaft, Black

Removes Timken® bearings on late '86–'02 Big Twins; durable U.S.-made construction.

€341.16 €428.89

-€51.82

JIMS Main Drive Gear Bearing Removal Tool — 5-Speed, Blue, Silver

Removes old bearings straight without damaging the transmission case; usable without removing the transmission from the bike. Made in the U.S.A.

€201.53 €253.35

Driver Handle — Main drive gear, 5-speed, Blue anodized

-€33.92

JIMS Driver Handle — Main drive gear, 5-speed, Blue anodized

Installs main drive gear oil seal to correct depth with transmission assembled; includes protective sleeve; made in the U.S.A.

€131.92 €165.84

Tappet Oil Filter Screw Plug Tool — Black

-€10.19

JIMS Tappet Oil Filter Screw Plug Tool — Black

Removes tappet oil screen without removing the exhaust. Used to extract the tappet oil screen plug. Made in the U.S.A.

€39.65 €49.84

Shouldered Valve Guide Driver Set — 3/8", 1/32", 5/16" set, black/silver/yellow

-€15.27

JIMS Shouldered Valve Guide Driver Set — 3/8", 1/32", 5/16" set,...

Three-piece shouldered valve guide driver set (3/8", 1/32", 5/16") for guide removal and installation; made in the U.S.A.

€59.39 €74.66

-€5.54

ANDREWS Gauge Pins — 0.105" (2.67 mm) outside diameter, silver

Pins for measuring cam drive gear outside diameters; covers measurement differences between '84–'99 models.

€21.52 €27.06

-€5.90

ANDREWS Gauge Pins — 0.108" outside diameter

Used to measure the outside diameter of cam drive gears. Made in the USA. Ideal for cam gear inspection.

€22.94 €28.84

-€42.29

JIMS Electronic Speedometer Sensor — Electronic, Speedometer

Top-quality replacement electronic speedometer sensor. Includes O-ring, hardware and OEM connector. Fits aftermarket transmission cases with a speedometer sensor hole.

€164.48 €206.77

-€16.31

JIMS Thread Tapping Tool — JIMS 1169-1, Valve assembly

Precision tool for tapping threads; compatible with compression release valve installation kits. Made in USA.

€46.16 €62.47

Weatherproof permanent battery lead, powersport — 10 A, Black, Red

-€3.96

TECMATE Weatherproof permanent battery lead, powersport — 10 A, Black,...

Permanent weatherproof battery lead for powersport vehicles; provides a secure, low-profile permanent connection.

€8.50 €12.46

Charging Cable Extender — 2.5 m, compatible with pre-2015 AccuMate and pre-2012 OptiMate

-€4.49

TECMATE Charging Cable Extender — 2.5 m, compatible with pre-2015...

2.5 m extension cable with SAE connectors to extend charger reach; compatible with pre-2015 AccuMate and pre-2012 OptiMate.

€9.64 €14.13

Charger Replacement Clips — 10 A, Alligator Clamp, Black, Red

-€3.96

TECMATE Charger Replacement Clips — 10 A, Alligator Clamp, Black, Red

Replacement battery clips with easy-grip handles and a TM plug; fits round, square and flat tab posts.

€8.50 €12.46

-€29.80

JIMS Ignition Switch Housing Alignment Tool — Blue

Aligns ignition switch housing while tightening screws and positions the switch for proper fork lock engagement.

€115.91 €145.71

OptiMate TM72 Cig / DIN Plug — TECMATE, TM72, Electrical System

-€6.08

TECMATE OptiMate TM72 Cig / DIN Plug — TECMATE, TM72, Electrical System

Accessory plug lead for OptiMate/AccuMate chargers with white TM connectors. Fits car cigarette lighter and some motorcycle accessory sockets. Length 50 cm, 18 SWG copper cable. Wired for negative earth vehicles.

€13.05 €19.13

OptiMate Cable O-06 — 50 cm, AUTO to SAE, black

-€4.22

TECMATE OptiMate Cable O-06 — 50 cm, AUTO to SAE, black

Converts SAE to an Ø21 mm AUTO socket; internal locking slots, weatherproof cap, 50 cm length, flexible to -40 °C.

€9.07 €13.29

-€11.26

JIMS O² Sensor Tool Drive Receiver/Wrench — 3/8" drive, Silver

Socket accepts 3/8" drive or 7/8" wrench; removes and installs oxygen sensors on fuel-injected models; rated to 125 ft-lbs; made in the USA.

€43.80 €55.06

Replacement Backprobe Set — Ignitionmate, Ignitionmate Duo, Black, Red

-€1.57

TECMATE Replacement Backprobe Set — Ignitionmate, Ignitionmate Duo,...

Small and large scoop shapes for different-sized terminal pins. Replacement parts for IgnitionMate (PART# 3807-0187). Electrical test connector.

€3.39 €4.96

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company