TOOLS (4)

-€18.38
Out of Stock

JIMS Cam or Piston Bushing Installer Drill Jig — Cam, Black

Drill jig for installing bushings and drilling dowel pin holes; includes #31 HSS drill bit, staking dowel pin, made in the United States.

€71.47 €89.85

-€35.66
Out of Stock

JIMS Cam Cover Holding Tool — Blue, JIMS

Holds cam cover flat to protect against damage and scratches; clamps in a vice or Bridgeport™ mill. Made in the U.S.A.

€138.68 €174.34

Big Twin Transmission Main Seal Tool — Main shaft, transmission fitment, Black

-€97.44
Out of Stock

JIMS Big Twin Transmission Main Seal Tool — Main shaft,...

Removes and installs main drive seals on specific Harley-Davidson® Big Twin transmissions. Made in the U.S.A.

€378.92 €476.36

Inner Cam Bearing Removal Tool — Inner bearing, Cam, crankcase, Black

-€59.50
Out of Stock

JIMS Inner Cam Bearing Removal Tool — Inner bearing, Cam,...

Removes inner cam bearings without damaging the crankcase; prevents rollers from falling in; includes instructions.

€231.39 €290.89

-€47.05
Out of Stock

JIMS Piston Pin Bushing Tool — Piston pin application, Black, Silver

Removes and installs wrist pin bushings without removing rods from the crankcase. Made in the U.S.A.

€182.99 €230.04

-€49.22
Out of Stock

JIMS Shift Fork Gauge — 4-speed, plate-type shifter, black

Checks alignment of Big Twin transmission shift forks. Made in the U.S.A.

€191.41 €240.63

Piston Pin Lock Ring Tool — 0.515 in wrist pin, fits Harley-Davidson® No. 22582-52, Black

-€48.23
Out of Stock

JIMS Piston Pin Lock Ring Tool — 0.515 in wrist pin, fits...

Installs spiral-lock piston pin rings for 0.515 in wrist pins without distorting the ring; made in the U.S.A.

€187.63 €235.86

-€47.49
Out of Stock

JIMS Sprocket Shaft Bearing Nut Wrench — JIMS, 97235-55B

Tool for installing and removing bearing nuts; compact, durable construction. Made in the U.S.A.

€184.68 €232.17

-€93.75
Out of Stock

JIMS Pinion Gear Puller — Pinion gear, Black

Installs and removes pressed-on splined pinion gears on Harley-Davidson Big Twin and Sportsters; made in the U.S.A.

€364.64 €458.39

Connecting Rod Wrist Pin Bushing Tool — Wrist pin, Black

-€47.05
Out of Stock

JIMS Connecting Rod Wrist Pin Bushing Tool — Wrist pin, Black

Removes and installs wrist pin bushings without removing connecting rods from crankcases.
Includes instructions for easy use.
Made in the U.S.A.

€182.99 €230.04

-€83.86
Out of Stock

JIMS Cam Bearing Puller — Camshaft, Black

Removes cam bearings cleanly and straight after camshafts are removed from the support plate.

€326.11 €409.97

-€66.66
Out of Stock

JIMS Crankshaft Bearing Tool — Crankcase, Right, Black

Removes and installs bearings without damaging the case. Ideal for shop use.

€259.18 €325.84

-€16.98
Out of Stock

JIMS Cam Chain Tensioner Tool — Cam

Unloads pressure on primary and secondary chain tensioners for easier cam assembly and disassembly. Includes instructions. Made in the U.S.A.

€66.05 €83.03

-€47.93
Out of Stock

JIMS Wrist Pin Tool — Black, Blue, Silver, JIMS 1276

A handheld tool that simplifies wrist pin removal and installation for one-person operation. Made in the U.S.A.

€186.39 €234.32

-€56.67
Out of Stock

JIMS Inner Cam Bearing Removal Tool — Cam, crankcase, black

Removes inner cam bearings without damaging the crankcase. Prevents rollers from falling into the crankcase. Includes instructions. Made in the United States.

€220.39 €277.06

-€25.10
Out of Stock

JIMS Castlenut Socket — for inverted forks, black

Adapts a wrench to remove castle nuts and access the shock cylinder. Made in USA.

€97.59 €122.69

Rod Holder Tool — JIMS kit, Black, Blue, Silver, P/N 1284

-€63.35
Out of Stock

JIMS Rod Holder Tool — JIMS kit, Black, Blue, Silver, P/N 1284

Secures rods during reaming or honing of wrist pin bushings. Made in the USA. Fits most V-Twin and Buell Blast applications.

€246.36 €309.71

-€10.05
Out of Stock

JIMS Rod Alignment Tool — 114.3 mm (4-1/2"), Silver

Checks rod straightness without removing rods from the cases. Made in the U.S.A.

€39.09 €49.14

-€41.79
Out of Stock

JIMS Alternator Rotor Tool — 45A

Must-have puller for 45A charging systems; protects sprocket shaft threads and works with Harley-Davidson® alternators.

€162.53 €204.32

-€25.10
Out of Stock

JIMS Optional Seal Driver — Main shaft, Transmission, 4-Speed, Black

Optional drivers for use with the primary seal installation tool to help install seals.

€97.59 €122.69

Brake Caliper Piston Remover — Front and rear 4-piston calipers, gray, red

-€28.87
Out of Stock

JIMS Brake Caliper Piston Remover — Front and rear 4-piston...

Removes and holds caliper pistons square for safe seal and wiper installation on 4-piston front and rear calipers.

€112.27 €141.14

-€73.52
Out of Stock

JIMS Wrist Pin Bushing Reaming Tool — Wrist pin, 1726-1

Reams wrist pin bushings to the specified inner diameter. Can be used with rods in or out of the motor. Lead-in taper for easy use. Made in the U.S.A.

€285.92 €359.44

-€80.40
Out of Stock

JIMS Wrist Pin Bushing Reaming Tool — wrist pin, Gray

Reams wrist pin bushings to the proper inner diameter. Use with rods in or out of the motor; lead-in taper for easy entry.

€312.66 €393.06

-€92.59
Out of Stock

JIMS Wrist Pin Bushing Reaming Tool — Gray

Reams wrist pin bushings to the correct inner diameter. Use with rods in or out of the motor. Lead-in taper for easy alignment. Made in the U.S.A.

€360.09 €452.68

-€26.87
Out of Stock

JIMS Fork Seal and Cap Installer — 39 mm fork tube, black

Seats seals and caps without scratching tubes. Lightly grease contact surfaces before use. Made in the U.S.A.

€104.50 €131.37

-€27.36
Out of Stock

JIMS Hardware Organizer M8 — Blue

Milwaukee Eight specific hardware organizer that indexes bolts, aids Loctite application, and includes a magnetic tray; made in the USA.

€106.40 €133.76

-€50.24
Out of Stock

JIMS Big Twin Cam Seal Tool — Camshaft, Black

Simple tool to install or remove cam seals without removing the cam cover. Presses new seal square and flat. Made in the U.S.A.

€195.38 €245.62

-€63.32
Out of Stock

JIMS Rocker Bushing and Roller Bearing Puller — Rocker box, Black

Removes rocker bushings and roller bearings in a single operation. Made in the U.S.A.

€246.20 €309.52

-€24.26
Out of Stock

JIMS Oil Pump Snap Ring Installer — Black

Tool for installing the outer snap ring on oil pump shafts; prevents over-stretching and speeds assembly. Made in the U.S.A.

€94.39 €118.65

-€32.79
Out of Stock

JIMS Oil Pump Seal Installer — Oil System, Black

Installs oil pump seals below the gear surface for a leak-free fit. Fits Big Twin aluminum oil pumps (except Twin Cam/M8). Made in the U.S.A.

€127.51 €160.30

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company