TOOLS (3)

-€28.42

JIMS Steering Head Bearing Race Tool — JIMS, Black

Precision tool removes and installs steering head bearing races on 1984–2016 Big Twin (except 2014–2016 Dressers), 1986–2016 XL and 1994–2002 Buell OEM frames; requires tool driver spacer and handle/driver.

€110.55 €138.97

Motor Stand — For Twin Cam A Motor, Blue, powder-coated

-€31.21

JIMS Motor Stand — For Twin Cam A Motor, Blue, powder-coated

Makes working on motors easier with better access. Made in the USA.

€121.35 €152.56

-€15.00

JIMS Driver Spacer Tool — Steering head, black

Works with a bearing race tool to remove and install bearing races with even, controlled taps.

€58.34 €73.34

-€22.64

JIMS Inner Cam Bearing Install Tool — inner bearing, black

Use to install inner cam bearings. Made in the U.S.A.

€88.03 €110.67

Motor Sprocket Shaft Seal Install Tool — Sprocket shaft, black

-€35.15

JIMS Motor Sprocket Shaft Seal Install Tool — Sprocket shaft, black

Presses the oil seal over the sprocket shaft into the case for accurate, damage-free installation. Made in the U.S.A.

€136.68 €171.83

-€64.51

JIMS Sprocket Shaft Bearing/Race/Seal Installation Tool — Black

Installs sprocket shaft bearing, race and seal on '84-'02 Big Twin. Precision fit for safe, damage-free installation. Made in the U.S.A.

€250.86 €315.37

Sprocket Shaft Bearing Optional Sleeves — 63.5 mm (2.5"), Black

-€13.28

JIMS Sprocket Shaft Bearing Optional Sleeves — 63.5 mm (2.5"), Black

Optional sleeves required to install the sprocket bearing on select Harley-Davidson® Sportster and Buell® model years.

€51.66 €64.94

Sprocket Shaft Bearing Installation Tool — Sprocket Shaft, Black

-€65.65

JIMS Sprocket Shaft Bearing Installation Tool — Sprocket Shaft, Black

Installs the flywheel assembly into the left crankcase Timken® bearing on '55–'76 XL and K. Optional sleeves sold separately for '86–'03 XL and '94–'03 Buell. Made in the U.S.A.

€255.31 €320.96

-€16.83

JIMS Fork Stem Nut Wrench — 1-1/2" stem nut, Black

Access and torque the 1-1/2" stem nut without removing the radio.
Saves up to 45 minutes for experienced mechanics.
Made in the U.S.A.

€65.43 €82.26

-€26.65

JIMS Late-Model Neck Bearing Tool — Steering stem, Black

Precision tapered drivers ensure correct alignment and installation depth for bearing races; prevents damage during installation. Made in the U.S.A.

€103.61 €130.26

Motor Stand — Black, For Evo Models, For Big Twin Models

-€32.11

JIMS Motor Stand — Black, For Evo Models, For Big Twin Models

Improves access for motor work and simplifies maintenance. Made in the USA.

€124.90 €157.01

-€85.83

JIMS Swingarm Bushing Tool — Swingarm, Black

Precision tool for installing delicate silicone cleveblock bushings; presses on the outer sleeve and works with or without a press.

€333.77 €419.60

-€40.27

JIMS Fuel Tank Wall Mount — Black

Fits most one-piece fuel tanks using 5/16" or 3/8" mounting hardware. Securely holds a tank on a wall stud. Made in the U.S.A.

€156.59 €196.86

-€20.58

JIMS Cam or Piston Bushing Installer Drill Jig — Cam, Black

Installs bushings and drills dowel-pin holes to factory specs; includes #31 HSS jobber drill bit; made in the U.S.A.

€80.03 €100.61

-€27.92

JIMS Flywheel Socket — Crank pin, Black

Machined for full nut-to-socket contact; prevents nut rounding and lowers injury risk. Made in the U.S.A.

€108.58 €136.50

-€35.57

JIMS Wheel Bearing Race Tool — Black, bearing cup

Removes and installs bearing cups in cast wheels; use with a compatible handle.

€138.33 €173.90

-€15.69

JIMS Pinion Gear Nut Socket — Pinion gear

Socket for installing and removing pinion gear nuts. Made in the U.S.A.

€61.02 €76.71

-€57.85

JIMS Transmission Sprocket Locknut Wrench — Counter shaft, Black

Removes the hex nut at the end of the main drive gear; extra-long two-piece design with an inner collar for safer retention. Made in USA.

€224.98 €282.83

-€44.03

JIMS Fork Cap Installer — Blue, Silver

Installs fork tube caps without removing fork legs. Made in the U.S.A.

€171.23 €215.26

-€54.86

JIMS Pinion Bushing Puller — Pinion, cam cover, Black

Removes the pinion bushing from the cam cover in a single operation; use with a cam cover holder.

€213.38 €268.24

-€47.77

JIMS Swingarm Bearing Installer — Black

Tool kit installs drive- and brake-side swingarm bearings set at different depths and includes a remover to press the spacer out of the bearing. Made in the U.S.A.

€185.76 €233.53

-€29.85

JIMS Clutch Hub Puller — Clutch hub, Black, Silver

Removes wet and dry clutch hubs without removing the clutch release rod; four bolts included for dry clutch removal; made in the U.S.A.

€116.08 €145.93

-€6.35

JIMS Fork Cap Allen Socket — Silver

Large hex-head tool for disassembling updated top covers on Harley-Davidson® touring models with 49 mm forks. Made in the USA.

€24.69 €31.04

-€41.01

JIMS Shift Fork Gauge — Drum-type shifter, 4-speed, black

Checks alignment of Big Twin transmission shift forks. Made in the U.S.A.

€159.45 €200.46

-€61.99

JIMS Camshaft Removal/Installation Tool — Front, Rear

Multi-function tool for removing and installing front and rear camshafts and ball bearings on Twin Cam 88 engines. Made in the U.S.A.

€241.08 €303.07

Sprocket Lock Tool — Crankshaft, Camshaft, Black

-€17.78

JIMS Sprocket Lock Tool — Crankshaft, Camshaft, Black

Locks camshaft and crankshaft sprockets for safe removal, replacement, and torquing of sprocket bolts. Includes instructions. Made in the U.S.

€69.16 €86.94

-€14.29

JIMS Wrist Pin Bushing — Standard, pair

Precision bronze wrist pin bushings machined to hold concentricity to less than .0002" with a lead-in edge for easy installation.

€55.57 €69.86

-€28.57

JIMS Clutch Hub Puller — Clutch hub, Black

Works on Big Twin sprockets, alternator covers and early XL clutches. Fits 3-, 5-, 10-finger and 45" hubs. Made in the U.S.A.

€111.14 €139.71

-€26.97

JIMS Top Nut Fork Socket — 35 mm

Tool for removing and installing top fork nuts; rubber-protected socket, clears most handlebars.

€104.89 €131.86

Balancer Shaft Bearing Remover — Kit, Black

-€48.93

JIMS Balancer Shaft Bearing Remover — Kit, Black

Safe, damage-free removal of balancer shaft bearings; pushes on the bearing outer diameter; removes bearings from the "B" motor case in one smooth motion; made in the USA.

€190.26 €239.19

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company