TOOLS (3)

-€8.87

MOTION PRO Metric Socket T-Handle Set — Set of 4, 8 mm, 10 mm, 12 mm, 14 mm

Slim, durable socket set with an ergonomic handle and deep six-point sockets; includes a vinyl storage pouch.

€25.06 €33.93

-€27.02

JIMS Valve Spring Compressor — Valve Spring, Gray

Removes and replaces valves and new-style conical valve springs. Requires the dedicated valve spring compressor tool. Made in the U.S.A.

€105.09 €132.11

Traction Ladder — 208 cm (82"), 38 cm (15"), Black

-€22.19

CALIBER Traction Ladder — 208 cm (82"), 38 cm (15"), Black

Rollout grip design delivers superior traction on iced surfaces; compact for easy storage and quick attachment.

€62.69 €84.88

Metric Socket T-Handle Set — 8 mm, 10 mm, 12 mm, 14 mm, 17 mm, 19 mm, set of 6

-€15.97

MOTION PRO Metric Socket T-Handle Set — 8 mm, 10 mm, 12 mm, 14 mm, 17 mm,...

Six-piece metric T-handle socket set with slim-profile sockets that let you start nuts hands-free. Includes vinyl storage pouch.

€45.13 €61.10

-€8.39

JIMS Primary Cover Inspection Plug Tool — Black

Tool for removing and installing the primary inspection plug. Made in the USA.

€32.64 €41.03

-€11.41

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Red

Tool for quick removal and installation of the pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€44.40 €55.81

-€10.30

MOTION PRO 1/4" Hex Bit T-Handle Driver Spinner — 1/4" hex, 203.2 mm...

Bearing-mounted T-handle spinner for fast bolt and nut removal. Magnetic 1/4" hex drive holds bits securely. Bits not included.

€29.13 €39.43

-€46.14

FEULING OIL PUMP CORP. Camplate Tool — PSI Relief Valve, Black, Red, Silver

Test and set cam plate relief valve pop-off psi. Includes air regulator, 0-100 psi gauge, gasket and hardware. Bench test before installation.

€179.42 €225.56

T-Handle Bit Driver with JIS Cross-Head Bits — 215.9 mm (8.5"), chrome

-€8.56

MOTION PRO T-Handle Bit Driver with JIS Cross-Head Bits — 215.9 mm...

T-handle bit driver with magnetic heads and included JIS cross-head bits #1–#3; narrow profile fits tight spaces.

€24.23 €32.79

-€16.21

JIMS Pinion Gear Locker Tool — Pinion gear, Black

Locks the pinion gear for torquing the pinion nut. Easy to align and install.

€63.02 €79.23

-€2.52

MOTION PRO Wheel Bearing Remover — Split collet, black

Heat treated for long life; removes wheel bearings cleanly and safely for maintenance and shop use.

€7.11 €9.63

-€50.39

CALIBER Traction Ladder — Black, Ramp Pro HD

Compact rollout traction aid for improved grip on icy surfaces. Easy to attach with a large 1" clip and simple to store.

€142.41 €192.80

Flywheel Puller Right Hand Internal Thread — M30 x 1.0, Black oxide

-€8.86

MOTION PRO Flywheel Puller Right Hand Internal Thread — M30 x 1.0, Black...

Durable, heat-treated puller for safe flywheel or rotor removal. Right hand thread. Lifetime limited warranty.

€25.06 €33.92

Flywheel Puller Right Hand Internal Thread — M33 x 1.5, black oxide

-€11.83

MOTION PRO Flywheel Puller Right Hand Internal Thread — M33 x 1.5, black...

Reliable right-hand flywheel puller for safe removal of flywheels and rotors. Heat treated, durable finish, lifetime limited warranty.

€33.42 €45.25

XTrax - Off-Road Recovery Boards — 67.5 cm x 31.75 cm, Black, Pair

-€65.89

CALIBER XTrax - Off-Road Recovery Boards — 67.5 cm x 31.75 cm, Black,...

Durable off-road recovery solution with innovative tread, glove-friendly handle, and included straps for linking.

€186.19 €252.08

-€8.59

MOTION PRO Spinner II T-Handle Tool with Swivel Drive — 12", 1/4", Blue

Bearing-mounted spinner for faster bolt and nut removal; two-step drive head for swivel or fixed drive; padded grip for comfort.

€24.26 €32.85

Flywheel Puller Right Hand Internal Thread — M24 x 1.5, right-hand thread, black oxide

-€7.39

MOTION PRO Flywheel Puller Right Hand Internal Thread — M24 x 1.5,...

Precision flywheel puller with right-hand internal thread. Heat treated, durable protective finish, lifetime limited warranty.

€20.89 €28.28

-€2.52

MOTION PRO Float Bowl Wrench — Silver anodized

Removes 17 mm float bowl drain plugs; doubles as a high-speed compression adjuster for most Showa, KYB, and WP rear shocks. 12-point, low-profile design.

€7.11 €9.63

XTrax - Off-Road Recovery Boards — 67.5 cm length, 31.75 cm width, Red

-€65.89

CALIBER XTrax - Off-Road Recovery Boards — 67.5 cm length, 31.75 cm...

High-traction recovery boards with an innovative tread pattern, glove-friendly handles, durable material blend, and included linking straps.

€186.19 €252.08

-€6.59

WERA Wrench — 17 mm, 19 mm

High-quality open-end wrench with holding plate, limit stop, double-hex geometry, 30° return angle and color-coded tool finder.

€18.64 €25.23

Harley Davidson Cruise Drive 6-Speed Main Drive Gear Installer Tool — Black

-€110.03

JIMS Harley Davidson Cruise Drive 6-Speed Main Drive Gear Installer...

Holds the main drive gear square to its bearing bore and installs it without removing the transmission. Made in the USA.

€427.86 €537.89

Seal/Bearing Retainer Tool — 47 mm lock rings, 22 mm hex, silver

-€7.75

MOTION PRO Seal/Bearing Retainer Tool — 47 mm lock rings, 22 mm hex, silver

Precision tool to remove and replace rear wheel bearing/seal retainer rings for 47 mm lock rings; features a 22 mm hex.

€21.91 €29.66

Heavy Duty Straight-Folding Ramp — 203 cm (80"), 362 kg (800 lb), 28 cm (11"), Powder coated

-€25.86

MOOSE OFFROAD HARD-PARTS Heavy Duty Straight-Folding Ramp — 203 cm (80"), 362 kg (800...

Center-fold ramp with mesh surface, rubber-coated ramp fingers to reduce slipping, welded carrying handle, includes tie-down straps. Do not ride motorcycles or ATVs on the ramp.

€73.09 €98.95

-€6.52

WERA Wrench — 18 mm, stainless steel

High-quality ratcheting combination wrench with holding function, limit stop and 30° return angle for tight spaces.

€18.43 €24.95

Engine Stand — For Evo Big Twin, Blue, Powder-coated

-€28.02

S&S CYCLE Engine Stand — For Evo Big Twin, Blue, Powder-coated

Professional display appearance; protects against corrosion and minor abrasions. Economical solution for bench work, shipping, or display. Made in the U.S.A.

€109.19 €137.21

Recovery/Traction Boards — 104 cm (41"), 30 cm (11.75"), 10,000 lb capacity, red

-€18.80

MOOSE OFFROAD HARD-PARTS Recovery/Traction Boards — 104 cm (41"), 30 cm (11.75"),...

Reinforced nylon recovery boards that flex under load and assist in freeing vehicles from mud, snow, and sand. Mounting hardware included.

€53.15 €71.95

-€6.66

WERA Wrench — 11/16" SAE, stainless steel

High-performance hand tool with holding jaw, limit stop, double-hex geometry and a 30° return angle for tight spaces.

€18.83 €25.49

Harley Davidson Cruise Drive 6-Speed Transmission Main Bearing Installer Tool — Black

-€71.05

JIMS Harley Davidson Cruise Drive 6-Speed Transmission Main Bearing...

Safely installs main transmission case bearings in Harley Davidson Cruise Drive 6-Speed units without removing the bearing; holds bearing square to bore; made in the USA.

€276.32 €347.37

-€29.35

S&S CYCLE Engine Stand — For Twin Cam A Motor, Blue

Professional-looking support that protects finishes and provides an economical way to hold an engine for workbench use, shipping, or display. Made in the U.S.A.

€114.36 €143.71

$Recovery/Traction Boards — 104 cm (41\"), 30 cm (11-3/4\"), 10,000 lb capacity$

-€18.80

MOOSE OFFROAD HARD-PARTS Recovery/Traction Boards — 104 cm (41\"), 30 cm (11-3/4\"),...

Durable reinforced nylon recovery boards offering flexibility and support for recoveries in mud, snow, and sand; mounting hardware included.

€53.15 €71.95

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company