TOOLS (3)

Motor Stand — For Twin Cam A Motor, Blue, powder-coated

-€31.21

JIMS Motor Stand — For Twin Cam A Motor, Blue, powder-coated

Makes working on motors easier with better access. Made in the USA.

€121.35 €152.56

-€10.90

MUC-OFF 5-Piece Brush Set — Black, Gray, Set

Five specialized brushes for frames, wheels, spokes, chains and tight areas.
Tough, impact-resistant handles with rubberized zones for protection.
Includes a handy storage bag; avoid boiling water when cleaning.

€25.23 €36.13

-€15.00

JIMS Driver Spacer Tool — Steering head, black

Works with a bearing race tool to remove and install bearing races with even, controlled taps.

€58.34 €73.34

-€6.59

MUC-OFF 3X Premium Brush — Set, Black

Five-purpose brush set with sintered bristles, nylon durability, rubberised impact zones, and a storage bag for organized use.

€18.61 €25.20

-€22.64

JIMS Inner Cam Bearing Install Tool — inner bearing, black

Use to install inner cam bearings. Made in the U.S.A.

€88.03 €110.67

Motor Sprocket Shaft Seal Install Tool — Sprocket shaft, black

-€35.15

JIMS Motor Sprocket Shaft Seal Install Tool — Sprocket shaft, black

Presses the oil seal over the sprocket shaft into the case for accurate, damage-free installation. Made in the U.S.A.

€136.68 €171.83

-€64.51

JIMS Sprocket Shaft Bearing/Race/Seal Installation Tool — Black

Installs sprocket shaft bearing, race and seal on '84-'02 Big Twin. Precision fit for safe, damage-free installation. Made in the U.S.A.

€250.86 €315.37

Sprocket Shaft Bearing Optional Sleeves — 63.5 mm (2.5"), Black

-€13.28

JIMS Sprocket Shaft Bearing Optional Sleeves — 63.5 mm (2.5"), Black

Optional sleeves required to install the sprocket bearing on select Harley-Davidson® Sportster and Buell® model years.

€51.66 €64.94

Sprocket Shaft Bearing Installation Tool — Sprocket Shaft, Black

-€65.65

JIMS Sprocket Shaft Bearing Installation Tool — Sprocket Shaft, Black

Installs the flywheel assembly into the left crankcase Timken® bearing on '55–'76 XL and K. Optional sleeves sold separately for '86–'03 XL and '94–'03 Buell. Made in the U.S.A.

€255.31 €320.96

-€16.83

JIMS Fork Stem Nut Wrench — 1-1/2" stem nut, Black

Access and torque the 1-1/2" stem nut without removing the radio.
Saves up to 45 minutes for experienced mechanics.
Made in the U.S.A.

€65.43 €82.26

-€26.65

JIMS Late-Model Neck Bearing Tool — Steering stem, Black

Precision tapered drivers ensure correct alignment and installation depth for bearing races; prevents damage during installation. Made in the U.S.A.

€103.61 €130.26

-€85.83

JIMS Swingarm Bushing Tool — Swingarm, Black

Precision tool for installing delicate silicone cleveblock bushings; presses on the outer sleeve and works with or without a press.

€333.77 €419.60

-€40.27

JIMS Fuel Tank Wall Mount — Black

Fits most one-piece fuel tanks using 5/16" or 3/8" mounting hardware. Securely holds a tank on a wall stud. Made in the U.S.A.

€156.59 €196.86

-€20.58

JIMS Cam or Piston Bushing Installer Drill Jig — Cam, Black

Installs bushings and drills dowel-pin holes to factory specs; includes #31 HSS jobber drill bit; made in the U.S.A.

€80.03 €100.61

-€4.39

MUC-OFF Claw Brush — Black

Multi-head cleaner ideal for chain maintenance; includes a scraper for mud and three brush heads for thorough cleaning.

€6.53 €10.92

-€6.04

MUC-OFF Soft Wash Brush — Black

Soft bristle brush with oversized head and dual-density, non-slip handle for gentle bike cleaning.

€9.08 €15.12

-€4.40

MUC-OFF Detailing Brush — Black

Designed to access hubs, suspension mounts and fork crowns to remove embedded dirt.

€6.52 €10.92

-€27.92

JIMS Flywheel Socket — Crank pin, Black

Machined for full nut-to-socket contact; prevents nut rounding and lowers injury risk. Made in the U.S.A.

€108.58 €136.50

-€35.57

JIMS Wheel Bearing Race Tool — Black, bearing cup

Removes and installs bearing cups in cast wheels; use with a compatible handle.

€138.33 €173.90

-€15.69

JIMS Pinion Gear Nut Socket — Pinion gear

Socket for installing and removing pinion gear nuts. Made in the U.S.A.

€61.02 €76.71

-€57.85

JIMS Transmission Sprocket Locknut Wrench — Counter shaft, Black

Removes the hex nut at the end of the main drive gear; extra-long two-piece design with an inner collar for safer retention. Made in USA.

€224.98 €282.83

-€49.32

TECHNORESEARCH O2 Instal Block — Aluminum

O2 wideband sensor sampling block with vent screw for reliable service access.

€191.83 €241.15

-€20.25

HYPERPRO Special Tool for Spring Removal — Fork spring remover, kit

Professional hydraulic tool to compress shock springs and remove retaining rings. Includes adjustable adapter plates and adapter ring HP-T26.

€78.75 €99.00

-€1.85

TECHNORESEARCH O2 Instal Block — TR200055

Compact sampling block for wideband O2 sensors with vent screw for pressure equalization.

€7.19 €9.04

-€44.03

JIMS Fork Cap Installer — Blue, Silver

Installs fork tube caps without removing fork legs. Made in the U.S.A.

€171.23 €215.26

-€54.86

JIMS Pinion Bushing Puller — Pinion, cam cover, Black

Removes the pinion bushing from the cam cover in a single operation; use with a cam cover holder.

€213.38 €268.24

-€2.40

WERA Insulated Screwdriver — 1000 V, orange

VDE-insulated blades rated for 1,000 V; ergonomic multi-material handle with hard and soft zones; color-coded tool finder; hexagonal anti-roll; reduced shaft diameter.

€5.88 €8.28

-€47.77

JIMS Swingarm Bearing Installer — Black

Tool kit installs drive- and brake-side swingarm bearings set at different depths and includes a remover to press the spacer out of the bearing. Made in the U.S.A.

€185.76 €233.53

-€29.85

JIMS Clutch Hub Puller — Clutch hub, Black, Silver

Removes wet and dry clutch hubs without removing the clutch release rod; four bolts included for dry clutch removal; made in the U.S.A.

€116.08 €145.93

-€2.72

WERA Insulated Screwdriver — 1000 V, Orange, Red

VDE-insulated screwdriver rated to 1000 V with multi-component grip, anti-roll hexagon and reduced shaft for tight access.

€6.63 €9.35

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company