TOOLS (3)

-€10.56

JIMS Hydraulic Balancer Retainer Tool — Engine balancer, Silver

Holds hydraulic tensioners to maintain constant chain tension on counter balancer systems. Made in the U.S.A.

€41.03 €51.59

-€48.97

JIMS Mini Valve Spring Tester — Black, Blue

Compact tester for dual-rate and conical valve springs; fits up to 1.6" O.D.; 0–1000 P.S.I. gauge. Made in the U.S.A.

€190.44 €239.41

-€10.99

MOTION PRO Side Jaw Pincer Tool — Black, Blue

Compact side-jaw tool for installing Stepless® ear clamps in tight spaces.

€31.07 €42.06

-€9.19

JIMS Dipstick Removal Tool — Engine oil system, Gray

Safely removes engine oil dipsticks near hot exhausts; fits 3/8" ratchet and 7/8" wrench. Made in the U.S.A.

€35.75 €44.94

-€13.08

JIMS Mighty Bite Flywheel Lock and Tag — Blue

Secures the flywheel for service on Twin Cam motors; installs in place of the crank position sensor and includes a visible decommissioned tag.

€50.85 €63.93

$Piston Ring End Gap Tool — Fits H-D 95\", 103\", 110\" motors, 3.875\" or 4\" bore, blue anodized$

-€22.66

JIMS Piston Ring End Gap Tool — Fits H-D 95\", 103\", 110\" motors,...

Measures piston ring end gap quickly and accurately. Flanged design ensures a square fit in the bore. Fits H-D 95\", 103\", 110\" motors with 3.875\" or 4\" bore.

€88.13 €110.79

-€7.39

MOTION PRO Flywheel Puller with Thread Protector — M26 x 1.0, Black oxide

Professional puller for safe flywheel and rotor removal. Heat treated, laser-etched, includes thread protector and lifetime limited warranty.

€20.89 €28.28

Flywheel/Rotor Puller Internal Thread — M40 x 1.5, right-hand thread

-€13.31

MOTION PRO Flywheel/Rotor Puller Internal Thread — M40 x 1.5, right-hand...

Internal-thread design protects the crankshaft during rotor removal.
Laser-etched identification for easy tracking.
Heat treated and finished for durability; lifetime limited warranty.

€37.61 €50.92

Dowel Pin Puller Set — Engine case, black

-€19.22

MOTION PRO Dowel Pin Puller Set — Engine case, black

Compact kit with puller rod and slide hammer for stuck dowel pins. Includes 8 mm, 10 mm, 12 mm and 14 mm collets and a storage tray.

€54.33 €73.55

Tappet Position Holding Tool — Camshaft, Tappet, Black, Blue, Silver

-€19.21

JIMS Tappet Position Holding Tool — Camshaft, Tappet, Black, Blue,...

Protects and organizes tappets during camshaft service; stores pins and tappets for accurate reinstallation. Made in the U.S.A.

€74.70 €93.91

Crankcase Splitter V2 — Aluminum and steel, black and blue anodized

-€52.83

MOTION PRO Crankcase Splitter V2 — Aluminum and steel, black and blue...

Fast, easy-to-use crankcase splitter with 5 mm, 6 mm and 8 mm puller stud threads, captured retaining collars, grooved studs and molded storage tray.

€205.44 €258.27

Crankshaft Puller — 25 mm & 40 mm adapters, M10x1.25/M12x1.25, Blue anodized

-€27.07

MOTION PRO Crankshaft Puller — 25 mm & 40 mm adapters, M10x1.25/M12x1.25,...

Precision crankshaft puller with 25 mm and 40 mm adapters and reversible M10x1.25/M12x1.25 studs for fast, accurate installs.

€76.48 €103.55

Countershaft Seal Puller — 29–47 mm, black

-€20.11

MOTION PRO Countershaft Seal Puller — 29–47 mm, black

Removes countershaft seals 29–47 mm without damaging engine cases. Designed for off-road, street and ATV engines.

€56.88 €76.99

T-6 Valve Spring Compressor — 24 mm, Blue anodized

-€38.67

MOTION PRO T-6 Valve Spring Compressor — 24 mm, Blue anodized

Quick-release, fully adjustable valve spring compressor compatible with most motorcycle, ATV, UTV, and small engine cylinder heads.

€109.28 €147.95

-€22.46

JIMS Wrist Pin Adapter — wrist pin, gray

Removes wrist pins from Milwaukee-Eight® engines
Accessory for JIMS® Wrist Pin Tool (DS-196197)
Made in the U.S.A.

€87.34 €109.80

-€84.85

JIMS Milwaukee-Eight® Cam Bearing Tool — Black

Precision tool for camshaft inner needle bearing installation with tighter tolerances for accurate depth. Proven remover collet and fine-threaded installation driver. Made in the U.S.A.

€329.98 €414.83

-€20.62

JIMS Valve Spring Collar — Adapter, Black, Part 5808

Allows an existing compressor to remove smaller valves on M8 engines. For use with JIMS® Valve Spring Compressor Tool (PART# DS-196013). Made in the U.S.A.

€80.18 €100.80

-€22.64

JIMS Cylinder Hold Down Nuts — Blue, fits Twin Cam and Milwaukee Eight

Hold-down nuts for securing the cylinder during head removal; one end fits Twin Cam, the other fits Milwaukee Eight. Made in the U.S.A.

€88.03 €110.67

-€4.14

MOTION PRO Torx Bit Set — T25/T30, T40/T45, 1/4" drive fit

Rubber O-ring secures double-ended Torx bits. Sizes T25/T30 and T40/T45. Fits 1/4" drive with 5/16" socket or 5/16" T-handle. Compatible with Motion Pro MP08-161.

€11.69 €15.83

-€26.42

JIMS Main Seal Installer/Remover — JIMS, Part No. 5810

Tool for installing and removing the main crankshaft seal on Milwaukee Eight engines.

€102.75 €129.17

Pro Spark Plug Socket — 21.55 mm (0.848"), 3/8" square drive / 17 mm wrench

-€8.56

MOTION PRO Pro Spark Plug Socket — 21.55 mm (0.848"), 3/8" square drive /...

Internal retention system, easy-to-read laser-etched markings, slim skeleton profile, lightweight, lifetime limited warranty.

€24.23 €32.79

Pro Spark Plug Socket — 17 mm, 3/8" drive, Black oxide

-€8.56

MOTION PRO Pro Spark Plug Socket — 17 mm, 3/8" drive, Black oxide

Slim, durable spark plug socket with internal retention, laser-etched markings, protective black oxide coating, and lifetime limited warranty.

€24.23 €32.79

Pro Spark Plug Socket — 27.25 mm, Black oxide

-€8.56

MOTION PRO Pro Spark Plug Socket — 27.25 mm, Black oxide

Innovative plug-retention spark plug socket with slim skeleton profile and laser-etched markings; fits 3/8" drive or 17 mm wrench. Lifetime limited warranty.

€24.23 €32.79

$Stepped Swivel Socket Extension — 76.2 mm (3\"), Chrome, Spark plug$

-€3.85

MOTION PRO Stepped Swivel Socket Extension — 76.2 mm (3\"), Chrome, Spark...

Swivel socket extension works with Phillips screwdrivers, 1/4\" ratchets or drivers, and 14 mm wrenches; tilts up to 15° for tight access.

€10.85 €14.70

-€10.27

MOTION PRO Flywheel Puller Internal Thread with Protector — M28 x 1.0, Black

For removal of flywheels and rotors
Includes protector; right-hand thread
Heat treated for strength; lifetime limited warranty

€29.06 €39.33

-€213.23

JIMS Cylinder Torque Plate Kit — 3.937"–4" bore, black

Required when boring or honing late-model aluminum cylinders; simulates running stress; includes instructions; made in the U.S.A.

€829.24 €1,042.47

Hose Removal Tool — Cooling system, fuel system, Black, Blue

-€7.25

MOTION PRO Hose Removal Tool — Cooling system, fuel system, Black, Blue

Makes hose removal safer and easier while protecting fittings and nearby components.

€20.48 €27.73

-€35.90

MOTION PRO T-6 Valve Spring Compressor — 18 mm, 24 mm, Blue

Compact valve spring compressor for motorcycle, ATV, UTV, and small engine cylinder heads. Quick-release action, fully adjustable, includes fork-style tip for fast, safe service.

€139.61 €175.51

T-6 Valve Spring Compressor Adapter Set — 18 mm, 28 mm, Black anodized

-€5.91

MOTION PRO T-6 Valve Spring Compressor Adapter Set — 18 mm, 28 mm, Black...

Two-piece adapter set with 18 mm and 28 mm sizes for compatible valve spring compressors; improves fit and control during service.

€16.70 €22.61

Engine Stand — fits Milwaukee‑Eight Softail engines, 7 gauge (0.1875") steel, powder-coated blue

-€33.63

JIMS Engine Stand — fits Milwaukee‑Eight Softail engines, 7 gauge...

Securely mounts Milwaukee‑Eight Softail engines; fabricated from 7 gauge (0.1875") powder-coated steel for durable use.

€130.80 €164.43

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS