TOOLS (3)

-€8.61

MOOSE OFFROAD HARD-PARTS Clutch Hub Holder Tool — Zinc plated

Holds clutch hubs, flywheels, gears and sprockets. One side has angled jaws; the other side has two 8 mm spanner pins. Recommended for square-tooth clutch hubs; not for V-groove or half-round styles.

€24.34 €32.95

-€33.96

MOOSE OFFROAD FOUR WHEEL Polaris Water Pump Drive and Rotor Service Tool — Black, Rotor

Tool for removing and installing the water pump drive gear and removing the rotor from the crankshaft.

€95.99 €129.95

Master Link Pliers — Master link installer for chain, black

-€3.64

MOOSE OFFROAD HARD-PARTS Master Link Pliers — Master link installer for chain, black

Specially formed pliers that pull end link rollers together for quick master link installation or removal. Saves time.

€10.31 €13.95

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

RZR Belt Removal Tool — 7.5" L x 1" W, Silver

-€8.09

MOOSE OFFROAD FOUR WHEEL RZR Belt Removal Tool — 7.5" L x 1" W, Silver

CNC machined billet 6061 aluminum. Wide footprint for secure grip. Knurled round handle. Will not harm clutch housing. Measures 7-1/2" L x 1" W. Lightweight and compact. Made in the USA.

€22.86 €30.95

-€3.12

MOOSE OFFROAD HARD-PARTS Oil Filter Puller — Blue

Drive the sheet-metal screw into the oil filter housing to extract the filter without damaging the case. Easy removal of recessed filters. Not for use with SS reusable filters.

€8.83 €11.95

Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

-€38.80

FEULING OIL PUMP CORP. Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

Machines valve spring seats for correct spring height and spring cup fitment. Hardened pilots for 3/8" and 1/2" drills. Cuts 0.550" ID x 1.180" OD. For M8 heads with high lift cams.

€150.91 €189.71

Pilot Seat Cutter for M8 — for 6 mm valves

-€18.25

FEULING OIL PUMP CORP. Pilot Seat Cutter for M8 — for 6 mm valves

Machines valve spring seats for correct spring height and cup fit. Interchangeable cutter bodies and pilots; hardened pilots fit 3/8 and hand drills. For 6 mm valves.

€70.99 €89.24

-€39.97

MOOSE OFFROAD HARD-PARTS Drive Clutch Fixture Tool — Black

Holds the stationary sheave for spider removal and precise belt-to-sheave clearance. Mounts to bench or vise; strong center support for single-person operation.

€112.98 €152.95

-€18.12

MOOSE OFFROAD HARD-PARTS Belt Changing Tool — Black, anodized

Portable tool for quick belt replacement on the trail; smooth roller for easy removal and re-installation, precision machined, lightweight, fits Can Am X3.

€38.83 €56.95

-€9.65

MOOSE OFFROAD HARD-PARTS Safety Wire — 360 ft (109.7 m), Silver

Conveniently spooled safety wire for securing fasteners; compact reel fits storage compartments and packs. Ideal for shop or garage use.

€27.30 €36.95

-€6.26

MOOSE OFFROAD HARD-PARTS Fork Saver — Black, fork spring, fork seal

Arch design hooks knobby tire and rubber top grips fender bolts for secure transport.

Adjusts to four lengths to fit mini and full-size bikes and helps reduce suspension seal and spring wear.

€17.69 €23.95

-€2.86

MOOSE OFFROAD HARD-PARTS Spring Puller — Exhaust, Black, Silver

Larger heavy-duty handle for extra leverage and an extended hook for hard-to-reach springs.

€8.09 €10.95

-€2.60

MOOSE OFFROAD HARD-PARTS Easy Pour Flex Spout — 9-1/4" (23.5 cm), black

Flexible funnel spout with double threads, stopper cap and hang tab. 3/4" O.D. tip for controlled pouring.

€7.35 €9.95

-€3.38

MOOSE OFFROAD HARD-PARTS Two-Piece Funnel — 15", 3/4" tip, 6" OD, Black

Multi-use funnel with a 12" detachable flexible spout, easy-grip handle, and 3/4" o.d. tip.

€9.57 €12.95

-€10.96

MOOSE OFFROAD HARD-PARTS Safety Wire — 109.7 m (360'), silver

Compact safety wire on a plastic-spooled canister—ideal for shop, garage, and field repairs.

€30.99 €41.95

-€9.29

FEULING OIL PUMP CORP. Oil Pump Gear Alignment Tool — 9017, Black, Silver

Aligns oil pump gear flats with crankshaft flats for improved scavenge-port sealing. Assemble components on the bench and install the complete unit for best results.

€36.18 €45.47

-€32.92

MOOSE OFFROAD HARD-PARTS Storage Stand — Black

Secure, weather‑resistant storage with one large and two small compartments and an integrated rubber top.

€93.03 €125.95

Camplate Roll Pin Removal/Installation Tool — Valve spring application, Black

-€60.51

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Valve spring...

Tool for easy removal and installation of pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€235.80 €296.31

-€5.73

MOOSE OFFROAD HARD-PARTS Steering Stem Wrench — 12-Point, Silver

Fits steering stem and fork cap nuts without removing handlebars. Made in the U.S.A.

€16.22 €21.95

-€4.69

MOOSE OFFROAD HARD-PARTS Radiator Fin Straightener — 88.9 mm (3 1/2"), White

Straightens damaged radiator fins safely and quickly; sections marked for 8–15 fins per inch. Compact for tight spaces.

€13.26 €17.95

Fork Seal Driver — Fits 39–50 mm fork tubes, conventional and inverted forks

-€16.53

MOOSE OFFROAD HARD-PARTS Fork Seal Driver — Fits 39–50 mm fork tubes, conventional and...

Split-style seal installer designed for easy installation of most fork seals. Weighted body provides even seating for consistent results.

€35.42 €51.95

-€3.12

MOOSE OFFROAD HARD-PARTS Gasket Scraper Tool — 11" (27.94 cm), Black

Perfect size for motorcycle repairs and maintenance. 1" blade width for precise gasket removal.

€8.83 €11.95

-€3.64

MOOSE OFFROAD HARD-PARTS Power Valve Tool — Silver

Essential for adjusting power valves on KTM 2-strokes. Lightweight and portable.

€10.31 €13.95

-€6.00

MOOSE OFFROAD HARD-PARTS Universal Shock Preload Tool — Blue, Silver

Adjusts preload rings and collars for 35 mm - 75 mm; compact handle fits trail tool bags.

€16.95 €22.95

-€12.53

MOOSE OFFROAD HARD-PARTS MR-2 Fundamental Bike Stand — Black, Center mount

Affordable bike stand for storage with a rubber mat on top to protect frame rails.

€35.42 €47.95

-€1.85

SOLAS Impeller Installation Tool — YV, YS impeller series

Quick, safe tool for installing impellers. Match the tool application to your impeller series for proper fit.

€5.91 €7.76

-€8.28

SOLAS Impeller Installation Tool — Fits SX/SRZ/Twin (TP) and Fly series

Makes installing an impeller a snap. To find the proper installation tool for your impeller, match the tool application to the impeller series.

€26.42 €34.70

-€6.26

MOOSE OFFROAD HARD-PARTS Fork Cap Removal Tool — Silver

Socket-style tool for removing fork caps from 48 mm forks; billet aluminum construction; made in the USA.

€17.69 €23.95

-€6.26

MOOSE OFFROAD HARD-PARTS Fork Cap Removal Tool — For WP 4CS forks, 48 mm, Silver

Socket-style tool for fast fork cap removal. Fits 48 mm forks. Made in USA.

€17.69 €23.95

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS