TOOLS (2)

-€12.48

EPI Clutch Puller — Fits Arctic Cat, Brass

Precision-machined, heat-treated construction, individually packaged with instructions.

€48.51 €60.99

-€13.74

EPI Banding Tool — Blue, Ratcheting

Ratcheting tool for installing and tightening CV boot clamps to ensure a proper, moisture-resistant seal.

€53.41 €67.15

Clutch Compression Tool — Arctic Cat, Suzuki, CF Moto, powder-coated

-€21.52

EPI Clutch Compression Tool — Arctic Cat, Suzuki, CF Moto,...

Tool for single-person clutch compression, helix removal/installation, spring changes, and general maintenance.

€83.66 €105.18

Roller Pin Tool for Can-Am — Black, Silver

-€11.40

EPI Roller Pin Tool for Can-Am — Black, Silver

Specifically made to pull the pin from the clutch straight and without damage; includes a contact pad and an extra replacement tip.

€44.33 €55.73

-€11.30

EPI Clutch Puller — CF Moto, Gold

Precision-machined clutch puller engineered for strength; sold individually with instructions included.

€43.93 €55.23

-€32.10

DRAG SPECIALTIES Oil Extractor — 4 L (1.05 US gal.), Black, Clear

Sturdy and portable for quick fluid removal.

€90.73 €122.83

Hi-Pressure Shock Pump — 23 cm, rear shock, 0–30 psi, black/silver

-€11.72

DRAG SPECIALTIES Hi-Pressure Shock Pump — 23 cm, rear shock, 0–30 psi,...

Twist-and-lock removable gauge for compact storage. Fits rear shocks and front forks. Rotary flexible hose, die-cast gauge base and ergonomic handle. Precise adjust button for fine control.

€33.10 €44.82

Hi-Pressure Shock Pump — Rear shock, 0–60 psi, 23 cm (9")

-€12.06

DRAG SPECIALTIES Hi-Pressure Shock Pump — Rear shock, 0–60 psi, 23 cm (9")

Twist-and-lock removable gauge, rotary flexible hose, die-cast gauge base and ergonomic handle. Precise adjust button (2–3 psi per push). Fits in small storage areas.

€34.09 €46.15

-€1.97

DRAG SPECIALTIES Clear Timing Hole Plug — 19 mm (3/4"), timing mark, clear

Locates the timing mark without getting an eye full of oil.

€5.57 €7.54

-€46.76

DRAG SPECIALTIES Center Jack — 453 kg (1000 lb), 37 cm (14-1/2"), Black/Gray

Sturdy manual scissor jack with a non-slip rubber top pad and large footprint for stable motorcycle lifting. Not for use with air or electric impact guns.

€132.15 €178.91

-€44.19

DRAG SPECIALTIES Center Jack — 1,000 lb (453 kg), 14-1/2" max height

Sturdy scissor center jack with a durable rubber top pad and wide base for stable motorcycle lifting. Do not use air or electric impact guns.

€124.89 €169.08

-€6.97

EPI Banding Tool — CV Boot Kit, Red

Ratchet-style banding tool for installing small and large clamps; ensures secure, properly tensioned seals.

€27.13 €34.10

-€49.32

TECHNORESEARCH O2 Instal Block — Aluminum

O2 wideband sensor sampling block with vent screw for reliable service access.

€191.83 €241.15

-€1.85

TECHNORESEARCH O2 Instal Block — TR200055

Compact sampling block for wideband O2 sensors with vent screw for pressure equalization.

€7.19 €9.04

-€1.73

DRAG SPECIALTIES Cargo Net — 12" x 17", black, vinyl-coated metal hooks

Elastic cargo net secures gear on seats and luggage racks for easy transport and compact storage.

€4.89 €6.62

-€4.38

DAYTONA Magnetic Silicone Tray — Orange

Foldable silicone tray with embedded magnet to keep small metal parts organized.

€12.39 €16.77

-€4.38

DAYTONA Magnetic Silicone Tray — Orange

Foldable silicone tray with an embedded magnet at the base for secure organization of small parts.

€12.39 €16.77

-€383.31

TECHNORESEARCH Centurion Super Pro Plus — Black kit

Advanced electrical system diagnostic tool; not for use with Android-based systems. Optional red USB key (PN# 1020-2868) required for Direct Link.

€1,490.65 €1,873.96

-€172.34

TECHNORESEARCH Complete Oxygen Sensor Installation Kit — O2 sensor, Black, Clear

Fast, all‑in‑one bung kit for O2 sampling and tuning; includes insertion tool, drill bit, sampler blocks, tubing, 25 rivnuts, screws and copper washers.

€669.24 €841.58

-€14.96

TECHNORESEARCH Bung Refill Kit — Silver, Yellow, for 3807-0378

Includes 25 each of bungs, plugs and copper washers. For use with 3807-0378 only.

€58.07 €73.03

Drag Specialties Optimate 2 Duo EU Battery Charger — 12V, 2A, blue

-€16.31

DRAG SPECIALTIES Drag Specialties Optimate 2 Duo EU Battery Charger — 12V, 2A,...

Weatherproof automatic charger for Pb and LFP batteries; includes battery lead and clamps; safe for long-term maintenance and outdoor use.

€46.02 €62.33

Drag Specialties Optimate 5 EU — 12 V, EU plug

-€19.06

DRAG SPECIALTIES Drag Specialties Optimate 5 EU — 12 V, EU plug

Fully sealed 12V 4A charger and maintainer for lead-acid, AGM and gel motorcycle batteries. Diagnoses and recovers sulphated or deeply discharged batteries. IP54 rated; operable to -40°C.

€53.89 €72.95

Tread Doctor Tire Cutting Tool — Black, Stainless Steel

-€15.90

HARDLINE Tread Doctor Tire Cutting Tool — Black, Stainless Steel

Refreshes front or rear tires with a heated carbide blade; plug-in operation and easily resharpens for long life.

€44.92 €60.82

-€3.05

HARDLINE Thread Doctor™ Sniper Tool — HARDLINE, TD-SNIPER, Tire, Brass

Precision cutting tool for tread repair. Fits Tread Doctor™ heating irons. Cuts 1/4" grooves with adjustable depth.

€11.90 €14.95

-€21.68

HARDLINE Tread Doc — HARDLINE Tread, Kit

Heated carbide cutting tool for knobby tires. Angled cutting head for thin slices, forged carbide blade for lasting sharpness. Includes on/off switch and holding stand; works on any motorcycle tire.

€61.30 €82.98

-€1.83

HARDLINE Tread Doc — Tire

Heated carbide cutting tool for knobby tires; angled head for thin slices to extend tire life. Includes holding stand and on/off switch.

€7.12 €8.95

-€2.65

DRAG SPECIALTIES 6-in-1 Spoke Wrench — Standard style

Compact 6-in-1 spoke wrench that fits all standard spokes, perfect for quick wheel adjustments.

€7.49 €10.14

-€9.25

EPI 40 mm EZ Bearing Greaser — Silver, Billet aluminum

Quickly service Polaris 40 mm ID wheel bearings without removing the shaft. CNC machined grease channel makes packing bearings fast and reliable. Fits 3514635, 3585502, WE301016 and WE305502 and equivalents.

€35.97 €45.22

44 mm EZ Bearing Greaser — fits Polaris 44 mm ID wheel bearings, Silver

-€9.25

EPI 44 mm EZ Bearing Greaser — fits Polaris 44 mm ID wheel...

44 mm bearing greaser for Polaris 44 mm ID wheel bearings — CNC machined, precision grease channel; works with 3514822, 3514699, 3514924, 3514627 and WE301438.

€35.97 €45.22

-€9.25

EPI 30 mm EZ Bearing Greaser — Silver

Tool to pack grease into 30 mm ID wheel bearings. CNC machined with a precision grease channel. Requires wheel, spindle, or shaft removal on some models. Compatible with Arctic Cat, Can Am and Yamaha bearings listed.

€35.97 €45.22

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS