TOOLS (2)

-€2.52

MOTION PRO Float Bowl Wrench — Silver anodized

Removes 17 mm float bowl drain plugs; doubles as a high-speed compression adjuster for most Showa, KYB, and WP rear shocks. 12-point, low-profile design.

€7.11 €9.63

Seal/Bearing Retainer Tool — 47 mm lock rings, 22 mm hex, silver

-€7.75

MOTION PRO Seal/Bearing Retainer Tool — 47 mm lock rings, 22 mm hex, silver

Precision tool to remove and replace rear wheel bearing/seal retainer rings for 47 mm lock rings; features a 22 mm hex.

€21.91 €29.66

Compression Bolt Removal Tool — WP 4860 MXMA CC fit, 17 mm hex, Blue anodized

-€4.88

MOTION PRO Compression Bolt Removal Tool — WP 4860 MXMA CC fit, 17 mm...

Removes and installs the compression valve assembly from the fork cap. 17 mm hex head; enables correct torquing during installation. Use caution — fork cap assembly under pressure.

€13.80 €18.68

Gear Jammer™ — Primary gear, Blue anodized

-€4.43

MOTION PRO Gear Jammer™ — Primary gear, Blue anodized

Removes and installs primary gear on Honda CRF450R/X. Locks gears for easy service, allows correct torque on lock nuts, not for impact guns.

€12.53 €16.96

Wall Bracket for T-Handle Rack — Chrome, Silver

-€5.91

MOTION PRO Wall Bracket for T-Handle Rack — Chrome, Silver

Mounts a T-handle rack to a toolbox, wall or post; quick-release pin and built-in bottle opener; fits one-piece T-handle racks.

€16.70 €22.61

ForkTru™ Fork Alignment Tool — 27–62 mm legs, 140–220 mm on center, Blue anodized

-€10.24

MOTION PRO ForkTru™ Fork Alignment Tool — 27–62 mm legs, 140–220 mm on...

Tool for aligning front forks to ensure parallelism from top to bottom. Works with 27–62 mm fork legs and 140–220 mm on-center spacing. Knurled adjustment screws for easy setup and reduced seal/bushing wear.

€28.93 €39.17

Flywheel Puller Right Hand Internal Thread with M12 Cap — M28 x 1.0, black oxide

-€7.69

MOTION PRO Flywheel Puller Right Hand Internal Thread with M12 Cap — M28...

Heat-treated, high-carbon steel puller with right-hand internal thread and M12 cap. Laser-etched, hot black oxide finish and lifetime limited warranty.

€21.73 €29.42

Flywheel Puller/Primary Gear Extractor — Black oxide, Carbon steel

-€7.62

MOTION PRO Flywheel Puller/Primary Gear Extractor — Black oxide, Carbon...

Removes flywheels and rotors; includes 4 mm, 5 mm, and 6 mm hardware. Heat-treated, laser-etched, and backed by a lifetime limited warranty.

€21.56 €29.18

-€7.98

MOTION PRO Flywheel Puller — Internal thread, M28 x 1.0, Black oxide

Right hand internal-thread puller for removing flywheels or rotors; includes M14 cap and lifetime limited warranty.

€22.57 €30.55

Flywheel Puller Right Hand Internal Thread — M26 x 1.0, Black oxide

-€8.20

MOTION PRO Flywheel Puller Right Hand Internal Thread — M26 x 1.0, Black...

Precision right-hand internal-thread flywheel puller. Heat treated, laser etched, durable finish and lifetime limited warranty.

€23.18 €31.38

-€3.60

MOTION PRO Oil Filter Removal Tool — Black, Silver

Conical point screw pierces and grabs the sheet metal end cap for easy removal of recessed KTM oil filters. Not for use on reusable filters.

€10.16 €13.76

Flywheel Puller Right Hand Internal Thread — M38 x 1.5, black oxide

-€14.49

MOTION PRO Flywheel Puller Right Hand Internal Thread — M38 x 1.5, black...

Right hand internal thread flywheel puller; laser etched, heat treated, high carbon steel, durable finish, lifetime limited warranty.

€40.94 €55.43

-€15.23

MOTION PRO Deluxe Piston Pin Puller — Blue anodized

Removes piston pins from full skirt and short skirt (slipper) pistons. Fits pins 12 mm (1/2") to 24 mm (1"). Non-marring aluminum pin adapters and interchangeable piston adapters.

€43.05 €58.28

Counter Balancer and Clutch Hub Spanner for Honda — 20 mm ID, 3/8" driver, 4-pin spanner

-€2.96

MOTION PRO Counter Balancer and Clutch Hub Spanner for Honda — 20 mm ID,...

Heat-treated 4-pin spanner for removing Honda counter balancer and clutch hub nuts. 20 mm ID, for use with a 3/8" driver.

€8.38 €11.34

-€10.99

MOTION PRO Side Jaw Pincer Tool — Black, Blue

Compact side-jaw tool for installing Stepless® ear clamps in tight spaces.

€31.07 €42.06

-€7.39

MOTION PRO Flywheel Puller with Thread Protector — M26 x 1.0, Black oxide

Professional puller for safe flywheel and rotor removal. Heat treated, laser-etched, includes thread protector and lifetime limited warranty.

€20.89 €28.28

-€29.97

CRUZTOOLS RoadTech™ KT1 Tool Kit for KTM/Husqvarna — Roll-Up, Black, Kit

Compact roll-up tool kit with torx, hex, axle wrenches and roadside essentials for KTM and Husqvarna riders.

€84.77 €114.74

Flywheel/Rotor Puller Internal Thread — M40 x 1.5, right-hand thread

-€13.31

MOTION PRO Flywheel/Rotor Puller Internal Thread — M40 x 1.5, right-hand...

Internal-thread design protects the crankshaft during rotor removal.
Laser-etched identification for easy tracking.
Heat treated and finished for durability; lifetime limited warranty.

€37.61 €50.92

Dowel Pin Puller Set — Engine case, black

-€19.22

MOTION PRO Dowel Pin Puller Set — Engine case, black

Compact kit with puller rod and slide hammer for stuck dowel pins. Includes 8 mm, 10 mm, 12 mm and 14 mm collets and a storage tray.

€54.33 €73.55

Crankcase Splitter V2 — Aluminum and steel, black and blue anodized

-€52.83

MOTION PRO Crankcase Splitter V2 — Aluminum and steel, black and blue...

Fast, easy-to-use crankcase splitter with 5 mm, 6 mm and 8 mm puller stud threads, captured retaining collars, grooved studs and molded storage tray.

€205.44 €258.27

Crankshaft Puller — 25 mm & 40 mm adapters, M10x1.25/M12x1.25, Blue anodized

-€27.07

MOTION PRO Crankshaft Puller — 25 mm & 40 mm adapters, M10x1.25/M12x1.25,...

Precision crankshaft puller with 25 mm and 40 mm adapters and reversible M10x1.25/M12x1.25 studs for fast, accurate installs.

€76.48 €103.55

Countershaft Seal Puller — 29–47 mm, black

-€20.11

MOTION PRO Countershaft Seal Puller — 29–47 mm, black

Removes countershaft seals 29–47 mm without damaging engine cases. Designed for off-road, street and ATV engines.

€56.88 €76.99

T-6 Valve Spring Compressor — 24 mm, Blue anodized

-€38.67

MOTION PRO T-6 Valve Spring Compressor — 24 mm, Blue anodized

Quick-release, fully adjustable valve spring compressor compatible with most motorcycle, ATV, UTV, and small engine cylinder heads.

€109.28 €147.95

-€32.46

CRUZTOOLS RoadTech™ TR2 Tool Kit for Triumph Motorcycles — Roll-Up, Metric

Compact roll-up tool kit with torx and hex keys, sockets, wrenches and roadside essentials for Triumph motorcycles.

€91.84 €124.30

-€4.14

MOTION PRO Torx Bit Set — T25/T30, T40/T45, 1/4" drive fit

Rubber O-ring secures double-ended Torx bits. Sizes T25/T30 and T40/T45. Fits 1/4" drive with 5/16" socket or 5/16" T-handle. Compatible with Motion Pro MP08-161.

€11.69 €15.83

-€34.96

CRUZTOOLS RoadTech™ IN2 Tool Kit — Metric

Compact travel tool set for Chief, Chieftain, Roadmaster and Scout motorcycles. Includes axle wrenches, combination wrenches, adjustable wrench, sockets, Torx and hex keys, screwdriver, pliers, tape, ties, tire gauge and lifetime guarantee.

€98.91 €133.87

RoadTech™ B2 for BMW Motorcycles (2019 and newer) — Roll-up tool kit, metric

-€25.47

CRUZTOOLS RoadTech™ B2 for BMW Motorcycles (2019 and newer) — Roll-up...

RoadTech™ B2 for BMW motorcycles (2019 and newer) — compact roll-up tool kit with 34 mm axle wrench, sockets, Torx and hex keys, tire gauge; lifetime guarantee.

€98.91 €124.38

Pro Spark Plug Socket — 21.55 mm (0.848"), 3/8" square drive / 17 mm wrench

-€8.56

MOTION PRO Pro Spark Plug Socket — 21.55 mm (0.848"), 3/8" square drive /...

Internal retention system, easy-to-read laser-etched markings, slim skeleton profile, lightweight, lifetime limited warranty.

€24.23 €32.79

Pro Spark Plug Socket — 17 mm, 3/8" drive, Black oxide

-€8.56

MOTION PRO Pro Spark Plug Socket — 17 mm, 3/8" drive, Black oxide

Slim, durable spark plug socket with internal retention, laser-etched markings, protective black oxide coating, and lifetime limited warranty.

€24.23 €32.79

Pro Spark Plug Socket — 27.25 mm, Black oxide

-€8.56

MOTION PRO Pro Spark Plug Socket — 27.25 mm, Black oxide

Innovative plug-retention spark plug socket with slim skeleton profile and laser-etched markings; fits 3/8" drive or 17 mm wrench. Lifetime limited warranty.

€24.23 €32.79

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS