TOOLS (2)

T-Handle Bit Driver with JIS Cross-Head Bits — 215.9 mm (8.5"), chrome

-€8.56

MOTION PRO T-Handle Bit Driver with JIS Cross-Head Bits — 215.9 mm...

T-handle bit driver with magnetic heads and included JIS cross-head bits #1–#3; narrow profile fits tight spaces.

€24.23 €32.79

-€2.52

MOTION PRO Wheel Bearing Remover — Split collet, black

Heat treated for long life; removes wheel bearings cleanly and safely for maintenance and shop use.

€7.11 €9.63

-€8.56

MOTION PRO Spinner II T-Handle Tool with Swivel Drive — 12" (30.5 cm),...

Bearing-mounted spinner for faster bolt and nut removal. Two-step drive head for swivel or fixed drive. Chrome-vanadium handle with padded grip.

€24.23 €32.79

Flywheel Puller Right Hand Internal Thread — M30 x 1.0, Black oxide

-€8.86

MOTION PRO Flywheel Puller Right Hand Internal Thread — M30 x 1.0, Black...

Durable, heat-treated puller for safe flywheel or rotor removal. Right hand thread. Lifetime limited warranty.

€25.06 €33.92

Flywheel Puller Right Hand Internal Thread — M33 x 1.5, black oxide

-€11.83

MOTION PRO Flywheel Puller Right Hand Internal Thread — M33 x 1.5, black...

Reliable right-hand flywheel puller for safe removal of flywheels and rotors. Heat treated, durable finish, lifetime limited warranty.

€33.42 €45.25

-€8.59

MOTION PRO Spinner II T-Handle Tool with Swivel Drive — 12", 1/4", Blue

Bearing-mounted spinner for faster bolt and nut removal; two-step drive head for swivel or fixed drive; padded grip for comfort.

€24.26 €32.85

Flywheel Puller Right Hand Internal Thread — M24 x 1.5, right-hand thread, black oxide

-€8.70

MOTION PRO Flywheel Puller Right Hand Internal Thread — M24 x 1.5,...

Precision flywheel puller with right-hand internal thread. Heat treated, durable protective finish, lifetime limited warranty.

€24.60 €33.30

-€2.52

MOTION PRO Float Bowl Wrench — Silver anodized

Removes 17 mm float bowl drain plugs; doubles as a high-speed compression adjuster for most Showa, KYB, and WP rear shocks. 12-point, low-profile design.

€7.11 €9.63

Seal/Bearing Retainer Tool — 47 mm lock rings, 22 mm hex, silver

-€7.75

MOTION PRO Seal/Bearing Retainer Tool — 47 mm lock rings, 22 mm hex, silver

Precision tool to remove and replace rear wheel bearing/seal retainer rings for 47 mm lock rings; features a 22 mm hex.

€21.91 €29.66

-€2.19

STAHLWILLE Wrench — 18×21 mm, 140 mm, Chrome

Open-end metric wrench meeting DIN 3110 and ISO 10102; 8×9 mm opening, 140 mm length, b1 18 mm / b2 21 mm, 21 g.

€5.35 €7.54

-€1.54

STAHLWILLE Wrench — 9 mm, 165 mm, Chrome

Combination wrench, DIN 3113 form A, anti-slip drive; spanner opening 14 mm, length 165 mm.

€3.80 €5.34

Compression Bolt Removal Tool — WP 4860 MXMA CC fit, 17 mm hex, Blue anodized

-€4.88

MOTION PRO Compression Bolt Removal Tool — WP 4860 MXMA CC fit, 17 mm...

Removes and installs the compression valve assembly from the fork cap. 17 mm hex head; enables correct torquing during installation. Use caution — fork cap assembly under pressure.

€13.80 €18.68

Gear Jammer™ — Primary gear, Blue anodized

-€4.43

MOTION PRO Gear Jammer™ — Primary gear, Blue anodized

Removes and installs primary gear on Honda CRF450R/X. Locks gears for easy service, allows correct torque on lock nuts, not for impact guns.

€12.53 €16.96

Wall Bracket for T-Handle Rack — Chrome, Silver

-€5.91

MOTION PRO Wall Bracket for T-Handle Rack — Chrome, Silver

Mounts a T-handle rack to a toolbox, wall or post; quick-release pin and built-in bottle opener; fits one-piece T-handle racks.

€16.70 €22.61

ForkTru™ Fork Alignment Tool — 27–62 mm legs, 140–220 mm on center, Blue anodized

-€10.24

MOTION PRO ForkTru™ Fork Alignment Tool — 27–62 mm legs, 140–220 mm on...

Tool for aligning front forks to ensure parallelism from top to bottom. Works with 27–62 mm fork legs and 140–220 mm on-center spacing. Knurled adjustment screws for easy setup and reduced seal/bushing wear.

€28.93 €39.17

Flywheel Puller Right Hand Internal Thread with M12 Cap — M28 x 1.0, black oxide

-€7.69

MOTION PRO Flywheel Puller Right Hand Internal Thread with M12 Cap — M28...

Heat-treated, high-carbon steel puller with right-hand internal thread and M12 cap. Laser-etched, hot black oxide finish and lifetime limited warranty.

€21.73 €29.42

-€22.19

MOTION PRO Flywheel Puller Internal Thread — M50 x 1.5, Black oxide

Removes flywheel or rotor. Heat-treated for strength. Laser-etched identification. Includes crank protector. Right-hand thread. Durable corrosion-resistant finish. Lifetime limited warranty.

€62.68 €84.87

-€2.55

STAHLWILLE Wrench — 17 mm, 16 mm, chrome

Offset metric wrench with chrome alloy construction and precise measurements for confined spaces. Length 180 mm.

€6.22 €8.77

Flywheel Puller/Primary Gear Extractor — Black oxide, Carbon steel

-€7.62

MOTION PRO Flywheel Puller/Primary Gear Extractor — Black oxide, Carbon...

Removes flywheels and rotors; includes 4 mm, 5 mm, and 6 mm hardware. Heat-treated, laser-etched, and backed by a lifetime limited warranty.

€21.56 €29.18

-€4.06

STAHLWILLE Wrench — 18 mm, 21 mm, Chrome

Offset wrench with StahlwilleSTABIL® offset, chrome plated, 8 x 10 mm openings, 180 mm length.

€9.89 €13.95

-€7.98

MOTION PRO Flywheel Puller — Internal thread, M28 x 1.0, Black oxide

Right hand internal-thread puller for removing flywheels or rotors; includes M14 cap and lifetime limited warranty.

€22.57 €30.55

-€2.55

STAHLWILLE Wrench — Chrome, Metric

Combination wrench, metric 8 x 10 mm openings, 180 mm length, chrome plated.

€6.22 €8.77

Flywheel Puller Right Hand Internal Thread — M26 x 1.0, Black oxide

-€8.20

MOTION PRO Flywheel Puller Right Hand Internal Thread — M26 x 1.0, Black...

Precision right-hand internal-thread flywheel puller. Heat treated, laser etched, durable finish and lifetime limited warranty.

€23.18 €31.38

-€2.72

STAHLWILLE Wrench — 8 x 10 mm, 180 mm, Chrome

Combination wrench, 8 x 10 mm opening, 180 mm length, chrome finish.

€6.63 €9.35

-€3.60

MOTION PRO Oil Filter Removal Tool — Black, Silver

Conical point screw pierces and grabs the sheet metal end cap for easy removal of recessed KTM oil filters. Not for use on reusable filters.

€10.16 €13.76

-€0.88

STAHLWILLE Socket — 4 mm drive, chrome finish

T27 tamper-resistant TORX® socket with hollow point; 5.0 mm TORX® size, L1 28 mm, L2 16 mm, d 11.6 mm, 10 g.

€2.17 €3.05

-€0.92

STAHLWILLE Socket — Chrome

Hollow-point TORX® T27 socket, TORX® 5.0 mm, chrome plated, compact 28/16 mm dimensions.

€2.25 €3.17

-€0.88

STAHLWILLE Socket — T27, 5.0 mm, L1 28 mm, Chrome

T27 TORX® socket, 5.0 mm, chrome-plated, L1 28 mm.

€2.17 €3.05

Socket — T27, 5.0 mm, 5.5 mm drive, Chrome

-€0.88

STAHLWILLE Socket — T27, 5.0 mm, 5.5 mm drive, Chrome

Hollow-point socket for inside Torx® tamper-resistant screws. Chrome plated alloy steel. T27, 5.0 mm, L1 28 mm.

€2.17 €3.05

-€0.92

STAHLWILLE Socket — 9 mm, Chrome

Hollow-point socket for tamper-resistant TORX® T27 screws. Chrome plated alloy steel. L1 28 mm, L2 16 mm, d 11.6 mm.

€2.25 €3.17

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS