TOOLS (2)

-€23.23

JIMS Replacement Drive — Cam, Black

Replacement drive for JIMS® cam bearing installation tool — durable, precision-fit component.

€90.38 €113.61

Travel Chain Keeper — Black, Gold, fits 130/135 QR and 12x157mm thru axle

-€17.58

PEDRO'S Travel Chain Keeper — Black, Gold, fits 130/135 QR and...

Protects the rear triangle during travel; adjustable for 130/135 QR and 12mm thru axles up to 12x157. Aluminum body with solvent‑resistant plastic pulley.

€49.67 €67.25

Pro Cassette Lockring Socket with pin — Lock Ring, Black, Yellow

-€10.59

PEDRO'S Pro Cassette Lockring Socket with pin — Lock Ring, Black, Yellow

Precision-machined alloy tool steel socket with 5mm guide pin and removable magnetic 12mm pin, extra-deep splines, quick-spin knurling, 3/8" drive, 24mm external drive, 19.8mm ID.

€29.91 €40.50

-€21.59

JIMS Pushrod Cover Clip — Pushrod, Black

Quick one-hand tool for installing and removing cover clips. Won't mar or slip. Made in the U.S.A.

€83.97 €105.56

Pro Cassette Lockring Socket without pin — 3/8" square drive, 24mm external, 19.8mm ID × 21.5mm depth

-€7.99

PEDRO'S Pro Cassette Lockring Socket without pin — 3/8" square drive,...

Precision alloy-steel socket for HG® standard cassette and disc brake lockrings. Extra-deep splines, quick-spin knurling, 3/8" square drive, 24mm external.

€22.59 €30.58

Piston Ring Compressor Set — 47.6 mm–73 mm (1-7/8"–2-7/8"), Set of 4, Black

-€34.82

JIMS Piston Ring Compressor Set — 47.6 mm–73 mm (1-7/8"–2-7/8"),...

Precise ratcheting compressor that compresses piston rings in small increments without damaging them. Made in the U.S.A.

€135.41 €170.23

-€44.20

JIMS Dual Gauge Leakdown Tester — JIMS, Cylinder, 4-Stroke, Black

Dual-gauge design for quick leakdown diagnosis; detects valve-seat leaks, bad rings and head gasket failures.

€171.90 €216.10

-€10.56

JIMS Hydraulic Balancer Retainer Tool — Engine balancer, Silver

Holds hydraulic tensioners to maintain constant chain tension on counter balancer systems. Made in the U.S.A.

€41.03 €51.59

-€48.97

JIMS Mini Valve Spring Tester — Black, Blue

Compact tester for dual-rate and conical valve springs; fits up to 1.6" O.D.; 0–1000 P.S.I. gauge. Made in the U.S.A.

€190.44 €239.41

-€9.19

JIMS Dipstick Removal Tool — Engine oil system, Gray

Safely removes engine oil dipsticks near hot exhausts; fits 3/8" ratchet and 7/8" wrench. Made in the U.S.A.

€35.75 €44.94

-€13.08

JIMS Mighty Bite Flywheel Lock and Tag — Blue

Secures the flywheel for service on Twin Cam motors; installs in place of the crank position sensor and includes a visible decommissioned tag.

€50.85 €63.93

$Piston Ring End Gap Tool — Fits H-D 95\", 103\", 110\" motors, 3.875\" or 4\" bore, blue anodized$

-€22.66

JIMS Piston Ring End Gap Tool — Fits H-D 95\", 103\", 110\" motors,...

Measures piston ring end gap quickly and accurately. Flanged design ensures a square fit in the bore. Fits H-D 95\", 103\", 110\" motors with 3.875\" or 4\" bore.

€88.13 €110.79

Tappet Position Holding Tool — Camshaft, Tappet, Black, Blue, Silver

-€19.21

JIMS Tappet Position Holding Tool — Camshaft, Tappet, Black, Blue,...

Protects and organizes tappets during camshaft service; stores pins and tappets for accurate reinstallation. Made in the U.S.A.

€74.70 €93.91

Piston Ring Compressor Set — 73 mm–111.1 mm, Black

-€45.45

JIMS Piston Ring Compressor Set — 73 mm–111.1 mm, Black

Fine-tooth ratcheting compressor for precise ring compression. Won't break or damage rings. Made in the U.S.A.

€176.75 €222.20

-€22.46

JIMS Wrist Pin Adapter — wrist pin, gray

Removes wrist pins from Milwaukee-Eight® engines
Accessory for JIMS® Wrist Pin Tool (DS-196197)
Made in the U.S.A.

€87.34 €109.80

-€84.85

JIMS Milwaukee-Eight® Cam Bearing Tool — Black

Precision tool for camshaft inner needle bearing installation with tighter tolerances for accurate depth. Proven remover collet and fine-threaded installation driver. Made in the U.S.A.

€329.98 €414.83

-€20.62

JIMS Valve Spring Collar — Adapter, Black, Part 5808

Allows an existing compressor to remove smaller valves on M8 engines. For use with JIMS® Valve Spring Compressor Tool (PART# DS-196013). Made in the U.S.A.

€80.18 €100.80

-€22.64

JIMS Cylinder Hold Down Nuts — Blue, fits Twin Cam and Milwaukee Eight

Hold-down nuts for securing the cylinder during head removal; one end fits Twin Cam, the other fits Milwaukee Eight. Made in the U.S.A.

€88.03 €110.67

-€26.42

JIMS Main Seal Installer/Remover — JIMS, Part No. 5810

Tool for installing and removing the main crankshaft seal on Milwaukee Eight engines.

€102.75 €129.17

-€9.85

PEDRO'S ICM-21 Multi-Tool — 2.5–8 mm hex, T25/T30, Black/Silver

Compact 21-function folding multi-tool built for bicycles. Ergonomic composite body, corrosion-resistant tool steel, includes chain tool, tire levers, spoke wrenches, Shimano crank cap tool, Presta valve core tool and bottle opener.

€27.88 €37.73

-€80.87

PEDRO'S Burrito Tool Kit — Black, T25, T30, 1.5–8 mm

24 tools covering 31 functions; 23 x 16" (60 x 40 cm) roll with multiple pockets and an x-frame that converts the roll into a rigid tool pallet; portable for travel, car, or home shop; durable polyester and stainless steel construction.