TOOLS (2)

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

Clutch Holding Tool — Polaris 550 '14-'16

-€41.78

EPI Clutch Holding Tool — Polaris 550 '14-'16

Holds clutches for safe maintenance. Fits Polaris 550 '14-'16 and is compatible with CT Tech Powerbloc, PB-50, PB-80 and Trailbloc ATV clutches.

€162.44 €204.22

-€9.03

EPI Clutch Puller — Brass, Polaris

Precision-machined, heat-treated clutch puller. Individually packaged with instructions for quick, safe use.

€35.13 €44.16

-€12.48

EPI Clutch Puller — Fits Arctic Cat, Brass

Precision-machined, heat-treated construction, individually packaged with instructions.

€48.51 €60.99

-€13.74

EPI Banding Tool — Blue, Ratcheting

Ratcheting tool for installing and tightening CV boot clamps to ensure a proper, moisture-resistant seal.

€53.41 €67.15

Clutch Compression Tool — Arctic Cat, Suzuki, CF Moto, powder-coated

-€21.52

EPI Clutch Compression Tool — Arctic Cat, Suzuki, CF Moto,...

Tool for single-person clutch compression, helix removal/installation, spring changes, and general maintenance.

€83.66 €105.18

Roller Pin Tool for Can-Am — Black, Silver

-€11.40

EPI Roller Pin Tool for Can-Am — Black, Silver

Specifically made to pull the pin from the clutch straight and without damage; includes a contact pad and an extra replacement tip.

€44.33 €55.73

-€11.30

EPI Clutch Puller — CF Moto, Gold

Precision-machined clutch puller engineered for strength; sold individually with instructions included.

€43.93 €55.23

Flexi-Rigid Manifold Adapter — M5, Black

-€3.06

TECMATE Flexi-Rigid Manifold Adapter — M5, Black

Flexible guide adapter for synchronizing machines with hard-to-reach carburetor or fuel-injection vacuum ports; bend the sheath and turn the inner tube to thread the fitting.

€11.86 €14.92

-€35.09

TECMATE CarbMate — 2-Channel, 12V, Black

Electronic two‑channel synchronizer for carburetors and throttle bodies with a transverse 9‑LED display; accurate to 0.5 cmHg; zero‑adjust knob; powered by 12V battery.

€136.49 €171.58

-€32.10

DRAG SPECIALTIES Oil Extractor — 4 L (1.05 US gal.), Black, Clear

Sturdy and portable oil extractor for easy fluid removal.

€90.73 €122.83

-€154.42

TECMATE Synchronizer — Yellow

Fast, accurate tool for synchronizing up to four throttle valves; built-in tachometer and rechargeable 7.2 V NiMH battery.

€600.50 €754.92

Hi-Pressure Shock Pump — 23 cm, rear shock, 0–30 psi, black/silver

-€11.72

DRAG SPECIALTIES Hi-Pressure Shock Pump — 23 cm, rear shock, 0–30 psi,...

Twist-and-lock removable gauge for compact storage. Fits rear shocks and front forks. Rotary flexible hose, die-cast gauge base and ergonomic handle. Precise adjust button for fine control.

€33.10 €44.82

Hi-Pressure Shock Pump — Rear shock, 0–60 psi, 23 cm (9")

-€12.06

DRAG SPECIALTIES Hi-Pressure Shock Pump — Rear shock, 0–60 psi, 23 cm (9")

Twist-and-lock removable gauge, rotary flexible hose, die-cast gauge base and ergonomic handle. Precise adjust button (2–3 psi per push). Fits in small storage areas.

€34.09 €46.15

-€1.97

DRAG SPECIALTIES Clear Timing Hole Plug — 19 mm (3/4"), timing mark, clear

Locates the timing mark without getting an eye full of oil.

€5.57 €7.54

-€46.76

DRAG SPECIALTIES Center Jack — 453 kg (1000 lb), 37 cm (14-1/2"), Black/Gray

Sturdy manual scissor jack with a non-slip rubber top pad and large footprint for stable motorcycle lifting. Not for use with air or electric impact guns.

€132.15 €178.91

-€44.19

DRAG SPECIALTIES Center Jack — 1,000 lb (453 kg), 14-1/2" max height

Sturdy scissor center jack with a durable rubber top pad and wide base for stable motorcycle lifting. Do not use air or electric impact guns.

€124.89 €169.08

-€6.97

EPI Banding Tool — CV Boot Kit, Red

Ratchet-style banding tool for installing small and large clamps; ensures secure, properly tensioned seals.

€27.13 €34.10

-€49.32

TECHNORESEARCH O2 Instal Block — Aluminum

O2 wideband sensor sampling block with vent screw for reliable service access.

€191.83 €241.15

-€1.85

TECHNORESEARCH O2 Instal Block — TR200055

Compact sampling block for wideband O2 sensors with vent screw for pressure equalization.

€7.19 €9.04

-€1.73

DRAG SPECIALTIES Cargo Net — 12" x 17", black, vinyl-coated metal hooks

Elastic cargo net secures gear on seats and luggage racks for easy transport and compact storage.

€4.89 €6.62

Weatherproof permanent battery lead, powersport — 10 A, Black, Red

-€3.96

TECMATE Weatherproof permanent battery lead, powersport — 10 A, Black,...

Permanent weatherproof battery lead for powersport vehicles; provides a secure, low-profile permanent connection.

€8.50 €12.46

Charging Cable Extender — 2.5 m, compatible with pre-2015 AccuMate and pre-2012 OptiMate

-€4.49

TECMATE Charging Cable Extender — 2.5 m, compatible with pre-2015...

2.5 m extension cable with SAE connectors to extend charger reach; compatible with pre-2015 AccuMate and pre-2012 OptiMate.

€9.64 €14.13

Charger Replacement Clips — 10 A, Alligator Clamp, Black, Red

-€3.96

TECMATE Charger Replacement Clips — 10 A, Alligator Clamp, Black, Red

Replacement battery clips with easy-grip handles and a TM plug; fits round, square and flat tab posts.

€8.50 €12.46

OptiMate TM72 Cig / DIN Plug — TECMATE, TM72, Electrical System

-€6.08

TECMATE OptiMate TM72 Cig / DIN Plug — TECMATE, TM72, Electrical System

Accessory plug lead for OptiMate/AccuMate chargers with white TM connectors. Fits car cigarette lighter and some motorcycle accessory sockets. Length 50 cm, 18 SWG copper cable. Wired for negative earth vehicles.

€13.05 €19.13

OptiMate Cable O-06 — 50 cm, AUTO to SAE, black

-€4.22

TECMATE OptiMate Cable O-06 — 50 cm, AUTO to SAE, black

Converts SAE to an Ø21 mm AUTO socket; internal locking slots, weatherproof cap, 50 cm length, flexible to -40 °C.

€9.07 €13.29

Replacement Backprobe Set — Ignitionmate, Ignitionmate Duo, Black, Red

-€1.57

TECMATE Replacement Backprobe Set — Ignitionmate, Ignitionmate Duo,...

Small and large scoop shapes for different-sized terminal pins. Replacement parts for IgnitionMate (PART# 3807-0187). Electrical test connector.

€3.39 €4.96

-€207.93

TECMATE BatteryMate 150-9 — 12 V, 1–10 A

Selectable load-tester, desulfator and charger that restores neglected starter batteries and supports MF commissioning charges.

€808.65 €1,016.58

OptiMate Pro 8 6V/12V Charger Station — 8-bank, 6V/12V, 1.2 A, EU plug

-€196.86

TECMATE OptiMate Pro 8 6V/12V Charger Station — 8-bank, 6V/12V, 1.2 A,...

Desulfates, recovers, charges, tests and maintains up to eight batteries independently; safe for standard, gel and AGM; includes clips and extension cables.

€765.56 €962.42

1/4" Eyelet Battery Connection Lead — 508 mm (20 in), 1/4 in eyelet (M6), 12V, 15A fuse

-€3.16

TECMATE 1/4" Eyelet Battery Connection Lead — 508 mm (20 in), 1/4 in...

Premium quick-connect battery lead with rubber-sealed SAE connector, flexible at very low temperatures, fused protection, 1/4" eyelets (M6), 5 A cable rating.

€6.80 €9.96

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company