TOOLS (2)

$Piston Ring End Gap Tool — Fits H-D 95\", 103\", 110\" motors, 3.875\" or 4\" bore, blue anodized$

-€22.66

JIMS Piston Ring End Gap Tool — Fits H-D 95\", 103\", 110\" motors,...

Measures piston ring end gap quickly and accurately. Flanged design ensures a square fit in the bore. Fits H-D 95\", 103\", 110\" motors with 3.875\" or 4\" bore.

€88.13 €110.79

Tappet Position Holding Tool — Camshaft, Tappet, Black, Blue, Silver

-€19.21

JIMS Tappet Position Holding Tool — Camshaft, Tappet, Black, Blue,...

Protects and organizes tappets during camshaft service; stores pins and tappets for accurate reinstallation. Made in the U.S.A.

€74.70 €93.91

-€22.46

JIMS Wrist Pin Adapter — wrist pin, gray

Removes wrist pins from Milwaukee-Eight® engines
Accessory for JIMS® Wrist Pin Tool (DS-196197)
Made in the U.S.A.

€87.34 €109.80

-€84.85

JIMS Milwaukee-Eight® Cam Bearing Tool — Black

Precision tool for camshaft inner needle bearing installation with tighter tolerances for accurate depth. Proven remover collet and fine-threaded installation driver. Made in the U.S.A.

€329.98 €414.83

-€20.62

JIMS Valve Spring Collar — Adapter, Black, Part 5808

Allows an existing compressor to remove smaller valves on M8 engines. For use with JIMS® Valve Spring Compressor Tool (PART# DS-196013). Made in the U.S.A.

€80.18 €100.80

-€22.64

JIMS Cylinder Hold Down Nuts — Blue, fits Twin Cam and Milwaukee Eight

Hold-down nuts for securing the cylinder during head removal; one end fits Twin Cam, the other fits Milwaukee Eight. Made in the U.S.A.

€88.03 €110.67

-€26.42

JIMS Main Seal Installer/Remover — JIMS, Part No. 5810

Tool for installing and removing the main crankshaft seal on Milwaukee Eight engines.

€102.75 €129.17

T-Handle Speed Ring Set — 12.7 mm (1/2"), 80 mm (3-1/8"), Black

-€4.43

BIKESERVICE T-Handle Speed Ring Set — 12.7 mm (1/2"), 80 mm (3-1/8"), Black

Reduces friction and speeds T-handle rotation for smoother fastener removal and positioning.

€12.52 €16.95

Extra Long Magnetic Torx Key Set — T10,T15,T20,T25,T27,T30,T40,T45,T50, Chrome

-€8.75

BIKESERVICE Extra Long Magnetic Torx Key Set —...

Extra-long Torx key set with built-in magnet. Sizes: T10, T15, T20, T25, T27, T30, T40, T45, T50. Extended reach and tamper-proof base ends.

€24.72 €33.47

-€7.80

BIKESERVICE Extra Long Magnetic Hex Key Set — 1.5–10 mm, Chrome

Nine-piece extra-long hex key set with ball-end access up to 25° and extended reach for hard-to-reach fasteners. Sizes 1.5–10 mm.

€22.05 €29.85

-€213.23

JIMS Cylinder Torque Plate Kit — 3.937"–4" bore, black

Required when boring or honing late-model aluminum cylinders; simulates running stress; includes instructions; made in the U.S.A.

€829.24 €1,042.47

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

Engine Stand — fits Milwaukee‑Eight Softail engines, 7 gauge (0.1875") steel, powder-coated blue

-€33.63

JIMS Engine Stand — fits Milwaukee‑Eight Softail engines, 7 gauge...

Securely mounts Milwaukee‑Eight Softail engines; fabricated from 7 gauge (0.1875") powder-coated steel for durable use.

€130.80 €164.43

Stubby Flex Head Ratchet Combination Wrench Set — Metric, Set of 8, Silver

-€37.37

BIKESERVICE Stubby Flex Head Ratchet Combination Wrench Set — Metric, Set...

Precision 72-tooth ratcheting gears need only a 5° swing arc to operate in tight spaces. Flex head access improves engagement and reduces fastener rounding.

€105.63 €143.00

Crankcase Separator — 2-stroke, 4-stroke

-€46.98

BIKESERVICE Crankcase Separator — 2-stroke, 4-stroke

Rebuild tool for separating vertically split single-cylinder crankcases. Includes M8-M6 double-ended screw, center pulling screw, quick-adjust nut and three-leg puller frame.

€132.76 €179.74

Stud Remover & Installer — Engine, Black

-€2.74

BIKESERVICE Stud Remover & Installer — Engine, Black

Removes and installs studs without damaging threads. Suitable for common stud thread sizes.

€7.75 €10.49

-€2.74

BIKESERVICE Stud Remover & Installer — Engine, Black

Removes and installs studs without damaging threads. Fits most common stud thread sizes for workshop use.

€7.75 €10.49

-€2.74

BIKESERVICE Stud Remover & Installer — Metric, Black

Removes and installs studs cleanly without thread damage; fits most common thread sizes.

€7.75 €10.49

-€2.74

BIKESERVICE Stud Remover & Installer — Engine, Black

Removes and installs studs without damaging threads; fits most common stud thread sizes.

€7.75 €10.49

-€7.67

BIKESERVICE Double-Ear Hose Clamp Pliers — 220 mm

Tool for reliable crimping of one- and two-ear hose clamps with top and side jaws for versatile use.

€21.66 €29.33

Piston Ring Compressor Set — 35 mm–111 mm (1-3/8"–4-3/8")

-€39.48

BIKESERVICE Piston Ring Compressor Set — 35 mm–111 mm (1-3/8"–4-3/8")

Ratcheting compressor and expander pliers for easy piston and ring installation. Fits 1-3/8"–4-3/8" pistons.

€111.53 €151.01

Piston Ring Expanding Pliers — For engine pistons

-€5.24

BIKESERVICE Piston Ring Expanding Pliers — For engine pistons

Ratcheting pliers with tapered jaws for controlled expansion and easy piston ring installation.

€14.83 €20.07

Cam Chain Breaker & Riveting Tool Kit — fits 2x3, 3x4, 4x5 cam chains, Black

-€13.81

BIKESERVICE Cam Chain Breaker & Riveting Tool Kit — fits 2x3, 3x4, 4x5 cam...

Compact kit for breaking and riveting cam chain master links; includes body, handle, push pins and instruction manual. Fits most 2x3, 3x4, 4x5 cam chains.

€39.02 €52.83

-€18.41

BIKESERVICE Flywheel Puller Kit — Clutch, Engine

Versatile kit for extracting flywheels, clutch bodies and primary gear assemblies; includes multiple yokes, a 125 mm forcing screw and assorted bolts; working range 30–100 mm.

€52.05 €70.46

Mechanical Bearing Separator — 2" and 3" splitters, 30–75 mm capacity, reach up to 220 mm

-€38.96

BIKESERVICE Mechanical Bearing Separator — 2" and 3" splitters, 30–75 mm...

Includes 2" and 3" bearing splitters covering 30–75 mm, bar-type puller head with 175 mm thrust bolt. Removes bearings, gears, sprockets and bushes.

€110.13 €149.09

Stud Setter & Extractor — 6 mm–19 mm, Black

-€8.26

BIKESERVICE Stud Setter & Extractor — 6 mm–19 mm, Black

Eccentric rotation grips stubborn or rusted threads for setting or removal. Fits 6 mm–19 mm studs.

€23.38 €31.64

Universal 3-Leg Oil Filter Wrench — 63–95 mm, Black

-€3.71

BIKESERVICE Universal 3-Leg Oil Filter Wrench — 63–95 mm, Black

Fits filter diameters 63–95 mm; use with a 3/8" square drive ratchet. Vinyl-dipped legs reduce filter damage.

€10.49 €14.20

-€21.93

BIKESERVICE Oil Filter Cup Wrench Set — Black Oxide

Easy removal of hard-to-reach filters
Use with 3/8" square drive and 19 mm hex driver
Handles up to 85 ft/lbs torque

€61.95 €83.88

-€3.32

BIKESERVICE Thin Wall Spark Plug Socket — 16 mm, hex and square drive

Thin-wall socket built to reach narrow spark plug wells with a rubber insert that holds plugs securely.

€9.39 €12.71

-€3.90

BIKESERVICE Thin Wall Spark Plug Socket — 20.8 mm, Black

Thin-wall bi-hex tool for accessing spark plug holes with a built-in rubber insert to hold the plug securely.

€11.01 €14.91

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS