TOOLS (2)

Removable Series E-Track Wheel Chock — 3-1/2" tire width, front mount, chrome

-€58.76
Out of Stock

PINGEL Removable Series E-Track Wheel Chock — 3-1/2" tire width,...

Move and position the wheel chock and tie-downs along Series E-Track for secure, space-efficient transport. Patented bracket; tie-down fitting sold separately.

€228.55 €287.31

Balancer Shaft Removal Tool — Left side, engine case, Black

-€72.29
Out of Stock

JIMS Balancer Shaft Removal Tool — Left side, engine case, Black

Removes front and rear counter‑balancer shaft bearing assemblies from the left engine case; fits 96" and 110" Beta® engines. Made in the U.S.A.

€281.14 €353.43

-€58.76
Out of Stock

PINGEL Removable Series E-Track Wheel Chock — 3-1/2" tire width,...

Portable wheel chock that slides along the Series E Track to stabilize the front wheel during transport; tie-down fitting sold separately.

€228.55 €287.31

Bearing and Race Puller Tool — Pinion shaft, flywheel bearing race, Black

-€109.87
Out of Stock

JIMS Bearing and Race Puller Tool — Pinion shaft, flywheel bearing...

Precision tool for removing press-fit bearings and gears from motorcycle pinion and flywheel shafts. Multi-use and made in the U.S.A.

€427.30 €537.17

Removable Series E-Track Wheel Chock — 6-1/2" (16.51 cm), Chrome

-€58.76
Out of Stock

PINGEL Removable Series E-Track Wheel Chock — 6-1/2" (16.51 cm), Chrome

Removable wheel chock for Series E Track stabilizes a motorcycle front wheel; patented mounting bracket and easy repositioning. Tie-down fitting sold separately.

€228.55 €287.31

Starter Jackshaft Seal Installer Tool — Jackshaft, Black

-€40.67
Out of Stock

JIMS Starter Jackshaft Seal Installer Tool — Jackshaft, Black

Installs the starter jackshaft seal without distortion; fits the seal in the upper part of the inner primary of Big Twins. Made in the U.S.A.

€158.18 €198.85

-€58.76
Out of Stock

PINGEL Removable Series E-Track Wheel Chock — 6-1/2" tire width, Chrome

Flexible, removable wheel chock that stabilizes the front wheel for trailer transport. Patented mounting bracket and tie-down fitting sold separately.

€228.55 €287.31

Harley Davidson Cruise Drive 6-Speed Main Drive Gear Remover Tool — Black

-€64.36
Out of Stock

JIMS Harley Davidson Cruise Drive 6-Speed Main Drive Gear Remover...

Removes the main drive gear from the main bearing while in the transmission case without requiring an arbor press.

€250.28 €314.64

-€62.84
Out of Stock

JIMS Inner Primary Bearing and Seal Remover/Installer Tool — Black kit

Safely removes and installs the inner primary bearing and seal without harming bearings. Made in the USA.

€244.42 €307.26

-€18.28
Out of Stock

JIMS O² Sensor Tool — Socket, Silver

Removes and installs oxygen sensors on fuel-injected models. Withstands up to 125 ft.-lbs. Made in the USA.

€71.09 €89.37

Transmission Case Shifter Shaft Seal Installer — For 6-Speed Transmission, Blue

-€12.27
Out of Stock

JIMS Transmission Case Shifter Shaft Seal Installer — For 6-Speed...

Precision tool that aligns and installs shifter seals to the correct depth.

€47.70 €59.97

Bearing Adapter — Sprocket shaft fit for '06 Harley-Davidson Dyna Glide, '07-'17 Twin Cam

-€28.65
Out of Stock

JIMS Bearing Adapter — Sprocket shaft fit for '06 Harley-Davidson...

Allows installation of a shaft bearing on '06 Harley-Davidson Dyna Glide and '07-'17 Twin Cam; fits sprocket shaft applications and works with compatible bearing tools.

€111.41 €140.06

Transmission Case Shifter Shaft Seal Installer — For 5-Speed Transmission, Blue

-€12.56
Out of Stock

JIMS Transmission Case Shifter Shaft Seal Installer — For 5-Speed...

Makes installing shifter shaft seals precise and effortless. Aligns and centers the seal to the correct depth for reliable fitment. Made in the USA.

€48.85 €61.41

-€20.47
Out of Stock

JIMS Shifter Shaft Sleeve Tool — 6-speed transmission, Black

Removes and installs shifter shaft sleeves, assemblies and drums; improves alignment and speeds installation. Made in the USA.

€79.61 €100.08

-€41.24
Out of Stock

JIMS Engine Rotator — flywheel assembly, Black

Rotates the flywheel and piston assembly for pushrod adjustments, engine builds, and clearance checks. Not for use with impact wrenches.

€160.35 €201.59

-€81.19
Out of Stock

JIMS 5 & 6-Speed Countershaft Bearing Remover/Installer Tool — Black

Removes and installs closed-end countershaft bearings on 5- and 6-speed transmissions without a press.

€315.80 €396.99

-€9.63
Out of Stock

MOOSE OFFROAD HARD-PARTS Sport Wheel Chock — 13 cm (5"), front mount, Black

Secures the front wheel during transport. Mounts permanently to the bed of a truck, van or trailer; hardware included.

€27.22 €36.85

Replacement Sleeve for Timken® Case Bearing Tool — Steel, Silver, Kit

-€60.93
Out of Stock

JIMS Replacement Sleeve for Timken® Case Bearing Tool — Steel,...

Several times stronger than stock aluminum case material; restores bearing support. Made in the USA.

€236.94 €297.87

-€9.63
Out of Stock

MOOSE OFFROAD HARD-PARTS Wheel Chock — 16.5 cm (6-1/2") width, front mount

Mounts to truck, van or trailer bed. Includes mounting hardware. Holds the front wheel securely during transport.

€27.22 €36.85

Inner Primary Bearing and Seal Removal and Installation Tool — Black, Chrome

-€69.45
Out of Stock

JIMS Inner Primary Bearing and Seal Removal and Installation Tool —...

Precision tool for removal and installation of inner primary bearings and seals; eliminates the need for a press and reduces risk of part damage.

€270.08 €339.53

-€6.41
Out of Stock

MOOSE OFFROAD HARD-PARTS Tire Wedge Wheel Guide — Front, Black

Holds the front tire from sliding left or right during transport; clamps to the truck bed and installs in seconds. Fits tires up to 6" wide. Made in the U.S.A.

€18.14 €24.55

Inner Primary Bearing and Seal Remover/Installer Tool — 967-4, Black

-€25.05
Out of Stock

JIMS Inner Primary Bearing and Seal Remover/Installer Tool — 967-4,...

Removes and installs the inner primary bearing and seal that the transmission mainshaft passes through by pushing on the bearing's outer perimeter to protect new bearings. Made in the USA.

€97.41 €122.46

Inner Primary Bearing and Seal Remover/Installer Tool — 967-5, Black

-€8.91
Out of Stock

JIMS Inner Primary Bearing and Seal Remover/Installer Tool — 967-5,...

Removes and installs inner primary bearings and seals by pushing on the bearing's outer perimeter to prevent damage to new bearings. Made in the USA.

€34.64 €43.55

Late Model Wheel Bearing Puller/Hub Protector Support Plate — Black

-€31.10
Out of Stock

JIMS Late Model Wheel Bearing Puller/Hub Protector Support Plate —...

Plate attaches to brake rotor mounting holes to provide a stable surface for bearing removal and installation; fits open-hub wheels with 5 or 7 lugs. Made in USA.

€120.93 €152.03

5-Speed Main Case Seal Installer Tool — Blue

-€23.44
Out of Stock

JIMS 5-Speed Main Case Seal Installer Tool — Blue

Ensures correct alignment and seal protection during installation.

Made in the USA.

€91.16 €114.60

Ultimate Clutch Adjusting Tool — Blue, Chrome, '85-'20 Big Twins

-€20.57
Out of Stock

JIMS Ultimate Clutch Adjusting Tool — Blue, Chrome, '85-'20 Big Twins

Quickly and accurately tighten the clutch adjusting screw jam nut without moving the screw. Includes Allen wrench that stores in the handle. Made in the USA. Fits all '85-'20 Big Twins with mechanical clutch.

€79.99 €100.56

Shifter Mechanism Sleeve Remover/Installation Tool — Cruise Drive Big Twin fit, Black

-€30.54
Out of Stock

JIMS Shifter Mechanism Sleeve Remover/Installation Tool — Cruise...

Removes and installs the shifter mechanism sleeve in cruise drive Big Twin transmissions without disassembling the transmission.

€118.80 €149.34

-€31.61
Out of Stock

JIMS Shifter Shaft Bushing Tool — Black, touring models, 5- or 6-speed

Removes and installs shifter shaft bushings in Big Twin primaries without removing the inner primary. For touring models with 5- or 6-speed transmission. Made in the USA.

€122.97 €154.58

Heavy-Duty Ratcheting Tie-Downs with Built-In Assist — 1" × 183 cm, 181 kg (400 lb), black

-€6.83
Out of Stock

PARTS UNLIMITED Heavy-Duty Ratcheting Tie-Downs with Built-In Assist — 1" ×...

Heavy-duty ratcheting tie-downs with built-in assist; 400 lb working load limit and vinyl-coated hooks for secure, scratch-resistant attachment.

€19.31 €26.14

Compensator Bolt Torx® Socket — Compensator Bolt Driver, JIMS 5534, Chrome

-€4.45
Out of Stock

JIMS Compensator Bolt Torx® Socket — Compensator Bolt Driver, JIMS...

Correct-style Torx driver/socket for the compensating sprocket retaining fastener. Made in the USA.

€17.32 €21.77

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS