TOOLS (2)

-€6.47

WERA Insulated Nutdriver — 12 mm, Orange

VDE-insulated blades rated to 1000 V
Kraftform multi-component handle for speed and torque
Handle markings for quick identification
Hexagonal anti-roll feature
Zinc phosphate plated finish

€15.84 €22.31

-€7.29

WERA Insulated Nutdriver — 13 mm, Orange, Red

VDE-insulated nutdriver rated for 1000 volts with ergonomic grip zones, anti-roll feature and corrosion-resistant plating.

€17.80 €25.09

Insulated adj. Torque handle — Torque wrench, Adjustable, Orange, Red

-€32.42

WERA Insulated adj. Torque handle — Torque wrench, Adjustable,...

Adjustable insulated torque handle. Torque range 0.3–1.2. Audible and tactile signal at preset torque. Fits Kraftform Kompakt VDE blades; quick blade change.

€79.24 €111.66

Exhaust Spring Puller Tool — T-handle, Black

-€2.73

FMF Exhaust Spring Puller Tool — T-handle, Black

T-handle spring puller that lets mechanics remove exhaust springs quickly and safely.

€12.28 €15.01

-€20.90

SLIME Super-Duty Tire Sealant Siphon Pump — Silver, Heavy Duty

Siphon pump for super-duty tire sealant — easy installation, rinses with water, non-corrosive.

€59.03 €79.93

Permanent Battery Lead O-01 — 20"/50cm, 1/4" & M6 eyelet, 15A fuse, 12V

-€2.88

DRAG SPECIALTIES Permanent Battery Lead O-01 — 20"/50cm, 1/4" & M6 eyelet, 15A...

Weather-protected permanent battery lead with premium quick connector, 20"/50cm length, 1/4" and M6 eyelets, integrated 15A fuse.

€6.02 €8.90

-€383.31

TECHNORESEARCH Centurion Super Pro Plus — Electrical system, Black

Professional-grade tester with intuitive controls, rugged housing, and modular expandability for fast, repeatable fault isolation.

€1,490.65 €1,873.96

Permanent Battery Lead O-01 — 20"/50cm, 1/4" & M6 eyelets, 15A fuse, 12 V, black

-€43.38

DRAG SPECIALTIES Permanent Battery Lead O-01 — 20"/50cm, 1/4" & M6 eyelets, 15A...

Weather-protected permanent battery lead with 2-pin SAE connector, 1/4" and M6 eyelets, and integrated 15A fuse.

€96.57 €139.95

-€172.34

TECHNORESEARCH Complete Oxygen Sensor Installation Kit — O2 sensor, Black, Clear

Fast, all‑in‑one bung kit for O2 sampling and tuning; includes insertion tool, drill bit, sampler blocks, tubing, 25 rivnuts, screws and copper washers.

€669.24 €841.58

-€14.96

TECHNORESEARCH Bung Refill Kit — O2 sensor, Silver/Yellow

Includes 25 each of bungs, plugs and copper washers.

€58.07 €73.03

Drag Specialties Optimate 2 Duo EU Battery Charger — 12V, 2A, blue

-€16.31

DRAG SPECIALTIES Drag Specialties Optimate 2 Duo EU Battery Charger — 12V, 2A,...

Weatherproof automatic charger for Pb and LFP batteries; includes battery lead and clamps; safe for long-term maintenance and outdoor use.

€46.02 €62.33

Drag Specialties Optimate 5 EU — 12 V, EU plug

-€19.06

DRAG SPECIALTIES Drag Specialties Optimate 5 EU — 12 V, EU plug

Fully sealed 12V 4A charger and maintainer for lead-acid, AGM and gel motorcycle batteries. Diagnoses and recovers sulphated or deeply discharged batteries. IP54 rated; operable to -40°C.

€53.89 €72.95

-€2.65

DRAG SPECIALTIES 6-in-1 Spoke Wrench — Standard style

Compact 6-in-1 spoke wrench that fits all standard spokes, perfect for quick wheel adjustments.

€7.49 €10.14

-€1.90

DRAG SPECIALTIES Softail Shock Preload Adjuster Tool — Silver

Makes preload adjustments much easier on Softail rear suspension.

€5.35 €7.25

-€6.53

DRAG SPECIALTIES Heavy-Duty Chain Breaker — for chains 420–630, Black, Red

Compact tool with a compression screw for fast pin removal; fits a wide range of common chain sizes.

€18.47 €25.00

-€4.94

DRAG SPECIALTIES Shock Spanner Wrench — Silver, Zinc-Plated Steel

Heavy-duty shock wrench for easy rear shock spring preload adjustment.

€13.95 €18.89

Clutch Hub Puller — 10" stud, E84 Big Twin fit, Black

-€13.56

DRAG SPECIALTIES Clutch Hub Puller — 10" stud, E84 Big Twin fit, Black

Removes clutch hubs without removing the transmission end cover; 10" stud; fits E84 Big Twin models.

€38.32 €51.88

-€5.71

DRAG SPECIALTIES Jumper Cable — 12-gauge, 183 cm (6'), Black, Red

Durable coating and rubber-encased grips for safer, more efficient jumps. 12-gauge cable.

€16.14 €21.85

-€2.20
Out of Stock

DRAG SPECIALTIES Cargo Net — 38 cm (15") x 38 cm (15"), plastic hooks, black

Elastic cargo net with 2.5" x 2.5" mesh; secures loads quickly and stores compactly.

€6.23 €8.43

-€9.02
Out of Stock

DRAG SPECIALTIES Starter Jackshaft Wrench — 3802-0071, Silver

Slides over the jackshaft and holds it by the splines without damage; double-sided for easy removal of the jackshaft assembly.

€25.51 €34.53

1" Standard Tie-Downs — 72" length, 1" width, 4,500 lb tensile, Black

-€10.47
Out of Stock

DRAG SPECIALTIES 1" Standard Tie-Downs — 72" length, 1" width, 4,500 lb...

Durable nylon tie-downs with industrial cam buckle and vinyl-coated hooks. Sold as a pair.

€29.53 €40.00

-€35.13
Out of Stock

DRAG SPECIALTIES Oil Extractor — 6.5 L (1.72 US gal), Black, Clear

Sturdy and portable oil extractor for cleaner, faster fluid removal.

€99.26 €134.39

-€8.89
Out of Stock

QUAD LOGIC Polaris Carburetor Choke Nut Tool — Silver, Carburetor

Choke nut wrench for removing and installing choke cable fittings on Mikuni 34–40 mm carburetors. Ideal for quick Polaris carburetor repairs.

€25.11 €34.00

-€11.55
Out of Stock

QUAD LOGIC Fuel Pump Nut Wrench for Polaris — Silver

Helps remove stuck fuel pump retainer nuts on Polaris models; reduces time and avoids damage.

€32.64 €44.19

-€1.73
Out of Stock

DRAG SPECIALTIES Cargo Net — 38 cm x 38 cm, Black

Elastic cargo net that secures loose gear on motorcycles and ATVs; reinforced corners and quick attachment for easy use.

€4.89 €6.62

Ball Joint Removal Tool for Strut Front Suspension — '90–'21 ATV/UTV fit, zinc

-€18.40
Out of Stock

QUAD LOGIC Ball Joint Removal Tool for Strut Front Suspension — '90–'21...

Two-piece steel tool for removing and installing ball joints on strut-style front suspension. Works with standard shop presses; fits '90–'21 ATV/UTV models.

€52.01 €70.41

-€18.40
Out of Stock

QUAD LOGIC Ball Joint Removal Tool for A-Arm Front Suspension — Zinc

Two-piece steel tool for removing and installing ball joints with a standard shop press; heavy-duty construction; fits 2008-2020 A-arm front suspension ATVs/UTVs (except RZR/General 1000).

€52.01 €70.41

Ball Joint Removal Tool for A-Arm Front Suspension — A-Arm front suspension, zinc

-€18.40
Out of Stock

QUAD LOGIC Ball Joint Removal Tool for A-Arm Front Suspension — A-Arm...

Two-piece steel tool for removing and installing ball joints with a standard shop press; heavy-duty for home or professional shops. Fits '15–'22 ATV/UTV A-Arm front suspensions.

€52.01 €70.41

-€8.33
Out of Stock

QUAD LOGIC Plastic Rivet Pliers — Black, QUAD LOGIC

Removes plastic rivets cleanly without damaging the head.

Designed for quick, repeatable removal; fits RZR plastic rivets.

€23.53 €31.86

Polaris Roll Pin Punch Tool — fits '90–current Polaris ATVs/UTVs (7661913), Black

-€9.89
Out of Stock

QUAD LOGIC Polaris Roll Pin Punch Tool — fits '90–current Polaris...

Removes Polaris driveline roll pins (7661913); use with air or standard hammer. Replace the roll pin each time.

€27.97 €37.86

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS