TOOLS (2)

Flywheel Puller Right Hand Internal Thread — M24 x 1.5, right-hand thread, black oxide

-€7.39

MOTION PRO Flywheel Puller Right Hand Internal Thread — M24 x 1.5,...

Precision flywheel puller with right-hand internal thread. Heat treated, durable protective finish, lifetime limited warranty.

€20.89 €28.28

-€2.52

MOTION PRO Float Bowl Wrench — Silver anodized

Removes 17 mm float bowl drain plugs; doubles as a high-speed compression adjuster for most Showa, KYB, and WP rear shocks. 12-point, low-profile design.

€7.11 €9.63

Seal/Bearing Retainer Tool — 47 mm lock rings, 22 mm hex, silver

-€7.75

MOTION PRO Seal/Bearing Retainer Tool — 47 mm lock rings, 22 mm hex, silver

Precision tool to remove and replace rear wheel bearing/seal retainer rings for 47 mm lock rings; features a 22 mm hex.

€21.91 €29.66

Compression Bolt Removal Tool — WP 4860 MXMA CC fit, 17 mm hex, Blue anodized

-€4.88

MOTION PRO Compression Bolt Removal Tool — WP 4860 MXMA CC fit, 17 mm...

Removes and installs the compression valve assembly from the fork cap. 17 mm hex head; enables correct torquing during installation. Use caution — fork cap assembly under pressure.

€13.80 €18.68

Gear Jammer™ — Primary gear, Blue anodized

-€4.43

MOTION PRO Gear Jammer™ — Primary gear, Blue anodized

Removes and installs primary gear on Honda CRF450R/X. Locks gears for easy service, allows correct torque on lock nuts, not for impact guns.

€12.53 €16.96

Wall Bracket for T-Handle Rack — Chrome, Silver

-€5.91

MOTION PRO Wall Bracket for T-Handle Rack — Chrome, Silver

Mounts a T-handle rack to a toolbox, wall or post; quick-release pin and built-in bottle opener; fits one-piece T-handle racks.

€16.70 €22.61

ForkTru™ Fork Alignment Tool — 27–62 mm legs, 140–220 mm on center, Blue anodized

-€10.24

MOTION PRO ForkTru™ Fork Alignment Tool — 27–62 mm legs, 140–220 mm on...

Tool for aligning front forks to ensure parallelism from top to bottom. Works with 27–62 mm fork legs and 140–220 mm on-center spacing. Knurled adjustment screws for easy setup and reduced seal/bushing wear.

€28.93 €39.17

Flywheel Puller Right Hand Internal Thread with M12 Cap — M28 x 1.0, black oxide

-€7.69

MOTION PRO Flywheel Puller Right Hand Internal Thread with M12 Cap — M28...

Heat-treated, high-carbon steel puller with right-hand internal thread and M12 cap. Laser-etched, hot black oxide finish and lifetime limited warranty.

€21.73 €29.42

$E-Track Strap — 213 cm (84\"), 50.8 mm (2\"), Black, D-ring end$

-€2.71

PARTS UNLIMITED E-Track Strap — 213 cm (84\"), 50.8 mm (2\"), Black, D-ring end

Hooks into the E-Track and features a D-ring end for use with standard tie-downs—quick, versatile cargo control.

€7.66 €10.37

Flywheel Puller/Primary Gear Extractor — Black oxide, Carbon steel

-€7.62

MOTION PRO Flywheel Puller/Primary Gear Extractor — Black oxide, Carbon...

Removes flywheels and rotors; includes 4 mm, 5 mm, and 6 mm hardware. Heat-treated, laser-etched, and backed by a lifetime limited warranty.

€21.56 €29.18

1" Heavy-Duty Cam Buckle Tie-Downs with Built-In Assist — 66" length, 1" width, 400 lb capacity

-€6.83

PARTS UNLIMITED 1" Heavy-Duty Cam Buckle Tie-Downs with Built-In Assist — 66"...

Heavy-duty cam buckle tie-downs with built-in assist, 3/8" hooks, easy operation and maximum holding power.

€19.31 €26.14

-€7.98

MOTION PRO Flywheel Puller — Internal thread, M28 x 1.0, Black oxide

Right hand internal-thread puller for removing flywheels or rotors; includes M14 cap and lifetime limited warranty.

€22.57 €30.55

1" Heavy-Duty Cam Buckle Tie-Downs with Built-In Assist — 66" length, 400 lb capacity, Red

-€6.83

PARTS UNLIMITED 1" Heavy-Duty Cam Buckle Tie-Downs with Built-In Assist — 66"...

Built-in assist for easier tightening.

Cam buckle with 3/8" hooks for secure, simple tie-downs.

€19.31 €26.14

Flywheel Puller Right Hand Internal Thread — M26 x 1.0, Black oxide

-€8.20

MOTION PRO Flywheel Puller Right Hand Internal Thread — M26 x 1.0, Black...

Precision right-hand internal-thread flywheel puller. Heat treated, laser etched, durable finish and lifetime limited warranty.

€23.18 €31.38

1" Heavy-Duty Cam Buckle Tie-Downs with Built-In Assist — 66" length, 400 lb capacity, Blue

-€6.83

PARTS UNLIMITED 1" Heavy-Duty Cam Buckle Tie-Downs with Built-In Assist — 66"...

Heavy-duty tie-downs with built-in assist, 3/8" hooks and easy operation for maximum holding power.

€19.31 €26.14

-€3.60

MOTION PRO Oil Filter Removal Tool — Black, Silver

Conical point screw pierces and grabs the sheet metal end cap for easy removal of recessed KTM oil filters. Not for use on reusable filters.

€10.16 €13.76

Heavy-Duty Ratcheting Tie-Downs with Built-In Assist — 1" x 72", 400 lb WLL, Red

-€6.18

PARTS UNLIMITED Heavy-Duty Ratcheting Tie-Downs with Built-In Assist — 1" x...

Heavy-duty ratcheting tie-downs with vinyl-coated hooks and built-in assist. 6' strap length, 400-lb working load limit for reliable cargo control.

€17.47 €23.65

Heavy-Duty 6' Cam Buckle Tie-Downs — 38.1 mm x 183 cm, 272 kg (600 lb), Blue

-€7.14

PARTS UNLIMITED Heavy-Duty 6' Cam Buckle Tie-Downs — 38.1 mm x 183 cm, 272 kg...

Heavy-duty 1-1/2" x 6' cam buckle straps with S-hooks, 600-lb. working load limit, and full vinyl coating.

€20.17 €27.31

1-1/2" Heavy-Duty Ratcheting Tie-Downs — 1-1/2" × 72", 1,000 lb, Red

-€8.30

PARTS UNLIMITED 1-1/2" Heavy-Duty Ratcheting Tie-Downs — 1-1/2" × 72", 1,000...

1-1/2" x 6' webbing, 5,000-lb. rated
Ratcheting mechanism for easy cinching
Two vinyl-coated hooks, 1,200-lb. straight pull
1,000-lb. working load limit

€23.45 €31.75

1-1/2" Heavy-Duty Ratcheting Tie-Downs — 1-1/2" x 6', 1,000 lb WLL, Blue

-€8.30

PARTS UNLIMITED 1-1/2" Heavy-Duty Ratcheting Tie-Downs — 1-1/2" x 6', 1,000 lb...

Heavy-duty ratcheting tie-down with 1,000 lb working load limit and two vinyl-coated hooks. Sold each.

€23.45 €31.75

Flywheel Puller Right Hand Internal Thread — M38 x 1.5, black oxide

-€14.49

MOTION PRO Flywheel Puller Right Hand Internal Thread — M38 x 1.5, black...

Right hand internal thread flywheel puller; laser etched, heat treated, high carbon steel, durable finish, lifetime limited warranty.

€40.94 €55.43

1-1/2" W Tie-Down Extensions — 18" long, 3,000 lb

-€2.48

PARTS UNLIMITED 1-1/2" W Tie-Down Extensions — 18" long, 3,000 lb

Looped nylon straps extend tie-down reach and protect finish; adjustable, heavy-duty construction.

€7.01 €9.49

1-1/2" W Tie-Down Extensions — 1-1/2" × 18", 3000 lb assembly strength, Red

-€2.48

PARTS UNLIMITED 1-1/2" W Tie-Down Extensions — 1-1/2" × 18", 3000 lb assembly...

Looped nylon straps for extending tie-down reach
Helps protect handlebars and seat rails
Durable construction for reliable transport

€7.01 €9.49

-€15.23

MOTION PRO Deluxe Piston Pin Puller — Blue anodized

Removes piston pins from full skirt and short skirt (slipper) pistons. Fits pins 12 mm (1/2") to 24 mm (1"). Non-marring aluminum pin adapters and interchangeable piston adapters.

€43.05 €58.28

-€19.74

DRAG SPECIALTIES 1-1/2" Ratchet Tie-Downs — 72" length, 6,000 lb tensile, Black

Durable 1-1/2" ratchet tie-downs with vinyl-coated safety hooks, double security stitching, and dependable nylon webbing.

€55.77 €75.51

-€3.28

DRAG SPECIALTIES Soft-Tie 18" Extensions — 18", 2041 kg (4500 lb), Black

Gentle, scratch-safe tie-down extensions ideal for bars and tight attachment points. Made in the U.S.A.

€9.30 €12.58

Soft-Tie 18" Extensions — 18", 6000 lb capacity, 1-1/2" width

-€4.47

DRAG SPECIALTIES Soft-Tie 18" Extensions — 18", 6000 lb capacity, 1-1/2" width

Soft-Tie extensions protect paint and chrome while securing bars and other thick anchor points; made in the United States.

€12.61 €17.08

Plush Soft-Tie Cover — 12", 1-1/2" width, fits 1" and 1.5" tie-downs, Black

-€4.94

DRAG SPECIALTIES Plush Soft-Tie Cover — 12", 1-1/2" width, fits 1" and 1.5"...

Slides over existing tie-down extensions to protect paint and chrome. Made in the U.S.A.

€13.97 €18.91

Counter Balancer and Clutch Hub Spanner for Honda — 20 mm ID, 3/8" driver, 4-pin spanner

-€2.96

MOTION PRO Counter Balancer and Clutch Hub Spanner for Honda — 20 mm ID,...

Heat-treated 4-pin spanner for removing Honda counter balancer and clutch hub nuts. 20 mm ID, for use with a 3/8" driver.

€8.38 €11.34

-€10.99

MOTION PRO Side Jaw Pincer Tool — Black, Blue

Compact side-jaw tool for installing Stepless® ear clamps in tight spaces.

€31.07 €42.06

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS