TOOLS (2)

-€21.59

JIMS Pushrod Cover Clip — Pushrod, Black

Quick one-hand tool for installing and removing cover clips. Won't mar or slip. Made in the U.S.A.

€83.97 €105.56

Piston Ring Compressor Set — 47.6 mm–73 mm (1-7/8"–2-7/8"), Set of 4, Black

-€34.82

JIMS Piston Ring Compressor Set — 47.6 mm–73 mm (1-7/8"–2-7/8"),...

Precise ratcheting compressor that compresses piston rings in small increments without damaging them. Made in the U.S.A.

€135.41 €170.23

-€44.20

JIMS Dual Gauge Leakdown Tester — JIMS, Cylinder, 4-Stroke, Black

Dual-gauge design for quick leakdown diagnosis; detects valve-seat leaks, bad rings and head gasket failures.

€171.90 €216.10

-€10.56

JIMS Hydraulic Balancer Retainer Tool — Engine balancer, Silver

Holds hydraulic tensioners to maintain constant chain tension on counter balancer systems. Made in the U.S.A.

€41.03 €51.59

-€48.97

JIMS Mini Valve Spring Tester — Black, Blue

Compact tester for dual-rate and conical valve springs; fits up to 1.6" O.D.; 0–1000 P.S.I. gauge. Made in the U.S.A.

€190.44 €239.41

-€9.19

JIMS Dipstick Removal Tool — Engine oil system, Gray

Safely removes engine oil dipsticks near hot exhausts; fits 3/8" ratchet and 7/8" wrench. Made in the U.S.A.

€35.75 €44.94

-€11.26

JIMS Slim Oil Filter Wrench — 14-flute, Silver

Exclusive slim design for easier access near the oil cooler and crankcase position sensor. More room to work around exhaust pipes, frame, hoses and brackets. Made in the U.S.A.

€43.80 €55.06

D-Ring Anchor Kits — 5,000 lb (2,268 kg), Zinc-Plated

-€12.70

CALIBER D-Ring Anchor Kits — 5,000 lb (2,268 kg), Zinc-Plated

Flush-mount, spring-loaded D-ring anchor kit includes rings, backer plates and Torx T-20 hardware. Made in the U.S.A.

€35.90 €48.60

D-Ring Anchor Kits — 2268 kg (5000 lb), Stainless Steel

-€25.43

CALIBER D-Ring Anchor Kits — 2268 kg (5000 lb), Stainless Steel

Two D-rings with full backer plates and Torx T-20 hardware; flush-mount, spring-loaded design—made in the U.S.A.

€71.85 €97.28

-€13.08

JIMS Mighty Bite Flywheel Lock and Tag — Blue

Secures the flywheel for service on Twin Cam motors; installs in place of the crank position sensor and includes a visible decommissioned tag.

€50.85 €63.93

$Piston Ring End Gap Tool — Fits H-D 95\", 103\", 110\" motors, 3.875\" or 4\" bore, blue anodized$

-€22.66

JIMS Piston Ring End Gap Tool — Fits H-D 95\", 103\", 110\" motors,...

Measures piston ring end gap quickly and accurately. Flanged design ensures a square fit in the bore. Fits H-D 95\", 103\", 110\" motors with 3.875\" or 4\" bore.

€88.13 €110.79

Retrax™ Straps — 1.83 m, 680 kg (1,500 lb), Red

-€15.44

CALIBER Retrax™ Straps — 1.83 m, 680 kg (1,500 lb), Red

Self-retracting tie-down with extra-large 2” hook and integrated spring clip. Flexible, durable, and made in USA.

€43.64 €59.08

Legend Gear Saddle Strap SLS — 39 x 21 cm

-€8.60

SW-MOTECH Legend Gear Saddle Strap SLS — 39 x 21 cm

Secure strap for LS1/LS2 saddlebags; universal fit for straight bench seats; includes two double-clamping buckles.

€33.42 €42.02

-€1.38

SW-MOTECH Tie-Down Strap Set for Tail Bags — 2 pack, black

Replacement tie-down straps for tail bags; includes 2 compression straps.

€5.34 €6.72

-€1.72

SW-MOTECH Tension Straps — 4-pack, Black

Replacement tension straps for Drybag 180/250/260/350/450/600/620/700. Includes 4 retention straps.

€6.68 €8.40

-€3.43

SW-MOTECH Strap Set Legend — Black

Set of four loop straps (80 cm) and two mounting straps (100 cm) for Legend Gear bags; polyamide straps with anodized aluminum buckles; compatible with all Legend Gear bags.

€13.38 €16.81

Tappet Position Holding Tool — Camshaft, Tappet, Black, Blue, Silver

-€19.21

JIMS Tappet Position Holding Tool — Camshaft, Tappet, Black, Blue,...

Protects and organizes tappets during camshaft service; stores pins and tappets for accurate reinstallation. Made in the U.S.A.

€74.70 €93.91

-€3.43

SW-MOTECH Strap Set Legend — SW-MOTECH, Cargo, Black

Legend Gear strap set — 4 loop straps (80 cm), 2 mounting straps (100 cm); polyamide straps with anodized aluminum buckles; compatible with all Legend Gear bags.

€13.38 €16.81

Strap Set Legend — 4 loop straps (80 cm), 2 mounting straps (100 cm), Black

-€1.38

SW-MOTECH Strap Set Legend — 4 loop straps (80 cm), 2 mounting straps...

Four 80 cm loop straps and two 100 cm mounting straps for securing Legend Gear bags. Polyamide webbing with anodized aluminum buckles.

€5.34 €6.72

-€3.43

SW-MOTECH ROK Straps — 2-pack, black

Elastic ROK straps with metal buckle and quick-release fastener for secure luggage lashing.

€13.38 €16.81

-€4.29

SW-MOTECH ROK Straps — 2-pack, Black

Durable elastic straps with metal buckle and smooth-edged hardware for secure luggage lashing.

€16.72 €21.01

-€8.22

CALIBER Retrax Strap — CALIBER 13548

Required for split use of the Ramp Pro HD. Secures the outer portion of Ramp Pro systems when loading larger vehicles. Made in the U.S.A.

€23.23 €31.45

Piston Ring Compressor Set — 73 mm–111.1 mm, Black

-€45.45

JIMS Piston Ring Compressor Set — 73 mm–111.1 mm, Black

Fine-tooth ratcheting compressor for precise ring compression. Won't break or damage rings. Made in the U.S.A.

€176.75 €222.20

-€26.09

JIMS Vacuum Tappet "Pump Up" Tool — Hydraulic pump, Black, Clear

Bleeds and pumps up hydraulic lifters, holds up to four lifters in a vacuum jar, and prepares them for installation.

€101.45 €127.54

Legend Gear Shoulder Strap — 90–150 cm, Black

-€5.15

SW-MOTECH Legend Gear Shoulder Strap — 90–150 cm, Black

Padded LA4 shoulder strap converts accessory bags into a practical shoulder bag; adjustable 90–150 cm, with secure fastening straps and anodized aluminium hooks.

€20.06 €25.21

-€22.46

JIMS Wrist Pin Adapter — wrist pin, gray

Removes wrist pins from Milwaukee-Eight® engines
Accessory for JIMS® Wrist Pin Tool (DS-196197)
Made in the U.S.A.

€87.34 €109.80

-€84.85

JIMS Milwaukee-Eight® Cam Bearing Tool — Black

Precision tool for camshaft inner needle bearing installation with tighter tolerances for accurate depth. Proven remover collet and fine-threaded installation driver. Made in the U.S.A.

€329.98 €414.83

-€20.62

JIMS Valve Spring Collar — Adapter, Black, Part 5808

Allows an existing compressor to remove smaller valves on M8 engines. For use with JIMS® Valve Spring Compressor Tool (PART# DS-196013). Made in the U.S.A.

€80.18 €100.80

-€22.64

JIMS Cylinder Hold Down Nuts — Blue, fits Twin Cam and Milwaukee Eight

Hold-down nuts for securing the cylinder during head removal; one end fits Twin Cam, the other fits Milwaukee Eight. Made in the U.S.A.

€88.03 €110.67

-€26.42

JIMS Main Seal Installer/Remover — JIMS, Part No. 5810

Tool for installing and removing the main crankshaft seal on Milwaukee Eight engines.

€102.75 €129.17

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS