TOOLS (2)

-€5.27

WERA Insulated Nutdriver — 10 mm

Insulated VDE blades rated to 1,000 volts. Multi-component Kraftform handle with anti-roll hex and zinc phosphate plated finish.

€12.90 €18.17

-€5.65

WERA Insulated Nutdriver — 11 mm, Orange

Insulated nutdriver with VDE-rated blades for safe work up to 1000 volts. Multi-component handle provides secure grip for both high-speed turning and high-torque transfer. Hexagonal anti-roll design and zinc phosphate plating enhance durability.

€13.80 €19.45

-€6.47

WERA Insulated Nutdriver — 12 mm, Orange

VDE-insulated blades rated to 1000 V
Kraftform multi-component handle for speed and torque
Handle markings for quick identification
Hexagonal anti-roll feature
Zinc phosphate plated finish

€15.84 €22.31

-€7.29

WERA Insulated Nutdriver — 13 mm, Orange, Red

VDE-insulated nutdriver rated for 1000 volts with ergonomic grip zones, anti-roll feature and corrosion-resistant plating.

€17.80 €25.09

Insulated adj. Torque handle — Torque wrench, Adjustable, Orange, Red

-€32.42

WERA Insulated adj. Torque handle — Torque wrench, Adjustable,...

Adjustable insulated torque handle. Torque range 0.3–1.2. Audible and tactile signal at preset torque. Fits Kraftform Kompakt VDE blades; quick blade change.

€79.24 €111.66

-€7.60

BLACK BEARING Fork Tool 32 — Black

Tool for installing and removing fork seals on 32 mm forks. Compatible with most brands. Compact and easy to use.

€21.48 €29.08

-€7.60

BLACK BEARING Fork Tool 34 — Black, Seal

Compact service tool compatible with most fork makes and models; simplifies installation and removal of internal components.

€21.48 €29.08

-€7.60

BLACK BEARING Fork Tool 35/36 — Black

Compact installer for fork seals on 35/36 mm forks; compatible with most fork brands.

€21.48 €29.08

-€7.60

BLACK BEARING Fork Tool 38 — Seal, Black

Compact service tool for installing and seating front fork seals; sold individually.

€21.48 €29.08

-€1.37

SOLAS Drive Shaft Holding Tool — For YB, YD, YRS, YQ impellers

Secures the impeller driveshaft during maintenance for safe removal and installation.

€4.39 €5.76

Impeller Installation Tool — Fits YF, YG, YD Concord, YQ impellers

-€1.89

SOLAS Impeller Installation Tool — Fits YF, YG, YD Concord, YQ...

Quick tool for reliable impeller installation; reduces damage risk. Match the tool application to your impeller series.

€6.05 €7.94

-€1.89

SOLAS Drive Shaft Holding Tool — for YF, YX, YG impellers

Holds an impeller driveshaft securely during maintenance to prevent rotation and reduce risk of damage.

€6.05 €7.94

Drag Specialties Optimate 2 Duo EU Battery Charger — 12V, 2A, blue

-€16.31

DRAG SPECIALTIES Drag Specialties Optimate 2 Duo EU Battery Charger — 12V, 2A,...

Weatherproof automatic charger for Pb and LFP batteries; includes battery lead and clamps; safe for long-term maintenance and outdoor use.

€46.02 €62.33

Drag Specialties Optimate 5 EU — 12 V, EU plug

-€19.06

DRAG SPECIALTIES Drag Specialties Optimate 5 EU — 12 V, EU plug

Fully sealed 12V 4A charger and maintainer for lead-acid, AGM and gel motorcycle batteries. Diagnoses and recovers sulphated or deeply discharged batteries. IP54 rated; operable to -40°C.

€53.89 €72.95

-€2.65

DRAG SPECIALTIES 6-in-1 Spoke Wrench — Standard style

Compact 6-in-1 spoke wrench that fits all standard spokes, perfect for quick wheel adjustments.

€7.49 €10.14

-€1.90

DRAG SPECIALTIES Softail Shock Preload Adjuster Tool — Silver

Makes preload adjustments much easier on Softail rear suspension.

€5.35 €7.25

-€6.53

DRAG SPECIALTIES Heavy-Duty Chain Breaker — for chains 420–630, Black, Red

Compact tool with a compression screw for fast pin removal; fits a wide range of common chain sizes.

€18.47 €25.00

-€4.94

DRAG SPECIALTIES Shock Spanner Wrench — Silver, Zinc-Plated Steel

Heavy-duty shock wrench for easy rear shock spring preload adjustment.

€13.95 €18.89

Clutch Hub Puller — 10" stud, E84 Big Twin fit, Black

-€13.56

DRAG SPECIALTIES Clutch Hub Puller — 10" stud, E84 Big Twin fit, Black

Removes clutch hubs without removing the transmission end cover; 10" stud; fits E84 Big Twin models.

€38.32 €51.88

-€5.71

DRAG SPECIALTIES Jumper Cable — 12-gauge, 183 cm (6'), Black, Red

Durable coating and rubber-encased grips for safer, more efficient jumps. 12-gauge cable.

€16.14 €21.85

-€2.20

DRAG SPECIALTIES Cargo Net — 38 cm (15") x 38 cm (15"), plastic hooks, black

Elastic cargo net with 2.5" x 2.5" mesh; secures loads quickly and stores compactly.

€6.23 €8.43

-€9.02

DRAG SPECIALTIES Starter Jackshaft Wrench — 3802-0071, Silver

Slides over the jackshaft and holds it by the splines without damage; double-sided for easy removal of the jackshaft assembly.

€25.51 €34.53

1" Standard Tie-Downs — 72" length, 1" width, 4,500 lb tensile, Black

-€10.47

DRAG SPECIALTIES 1" Standard Tie-Downs — 72" length, 1" width, 4,500 lb...

Durable nylon tie-downs with industrial cam buckle and vinyl-coated hooks. Sold as a pair.

€29.53 €40.00

Soft-Tie 18" Extensions — 18", 6000 lb capacity, 1-1/2" width

-€4.47

DRAG SPECIALTIES Soft-Tie 18" Extensions — 18", 6000 lb capacity, 1-1/2" width

Soft-Tie extensions protect paint and chrome while securing bars and other thick anchor points; made in the United States.

€12.61 €17.08

Impeller Installation Tool — Fits SRB, SRX, SRZ, SX/SX-4 impellers

-€4.13

SOLAS Impeller Installation Tool — Fits SRB, SRX, SRZ, SX/SX-4...

Simplifies impeller installation. Match the tool application to the impeller series to ensure proper fit.

€13.18 €17.31

-€35.13

DRAG SPECIALTIES Oil Extractor — 6.5 L (1.72 US gal.)

Sturdy and portable tool for quick, clean fluid removal.

€99.26 €134.39

Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

-€6.00

FUEL-TOOL Replacement Hooks — Fuel check valve, 4-pack, MC450, Silver

Replacement hooks for check valve rebuild kit; includes two lower O-ring hooks and two upper O-ring hooks; made in the USA.

€16.98 €22.98

Fuel Pressure Gauge — Fits '01-'25 Harley-Davidson (except V-Rod) with Delphi fuel injection, Black

-€67.58

FUEL-TOOL Fuel Pressure Gauge — Fits '01-'25 Harley-Davidson (except...

Magnetic fuel pressure gauge to check static and load readings. Includes storage pouch and O-ring lube. Head rotates 360°. Fits '01-'25 Harley-Davidson models (except V-Rod) with Delphi fuel injection.

€190.99 €258.57

-€1.73

DRAG SPECIALTIES Cargo Net — 38 cm x 38 cm, Black

Elastic cargo net that secures loose gear on motorcycles and ATVs; reinforced corners and quick attachment for easy use.

€4.89 €6.62

-€15.10

DRAG SPECIALTIES Oil Pump — 15–55 gal drums, air-operated

Air-operated oil pump compatible with 15–55 gal drums for quick, clean transfer.

€42.69 €57.79

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS