TOOLS (2)

Compression Bolt Removal Tool — WP 4860 MXMA CC fit, 17 mm hex, Blue anodized

-€4.88

MOTION PRO Compression Bolt Removal Tool — WP 4860 MXMA CC fit, 17 mm...

Removes and installs the compression valve assembly from the fork cap. 17 mm hex head; enables correct torquing during installation. Use caution — fork cap assembly under pressure.

€13.80 €18.68

Gear Jammer™ — Primary gear, Blue anodized

-€4.43

MOTION PRO Gear Jammer™ — Primary gear, Blue anodized

Removes and installs primary gear on Honda CRF450R/X. Locks gears for easy service, allows correct torque on lock nuts, not for impact guns.

€12.53 €16.96

Wall Bracket for T-Handle Rack — Chrome, Silver

-€5.91

MOTION PRO Wall Bracket for T-Handle Rack — Chrome, Silver

Mounts a T-handle rack to a toolbox, wall or post; quick-release pin and built-in bottle opener; fits one-piece T-handle racks.

€16.70 €22.61

ForkTru™ Fork Alignment Tool — 27–62 mm legs, 140–220 mm on center, Blue anodized

-€10.24

MOTION PRO ForkTru™ Fork Alignment Tool — 27–62 mm legs, 140–220 mm on...

Tool for aligning front forks to ensure parallelism from top to bottom. Works with 27–62 mm fork legs and 140–220 mm on-center spacing. Knurled adjustment screws for easy setup and reduced seal/bushing wear.

€28.93 €39.17

Flywheel Puller Right Hand Internal Thread with M12 Cap — M28 x 1.0, black oxide

-€7.69

MOTION PRO Flywheel Puller Right Hand Internal Thread with M12 Cap — M28...

Heat-treated, high-carbon steel puller with right-hand internal thread and M12 cap. Laser-etched, hot black oxide finish and lifetime limited warranty.

€21.73 €29.42

-€22.19

MOTION PRO Flywheel Puller Internal Thread — M50 x 1.5, Black oxide

Removes flywheel or rotor. Heat-treated for strength. Laser-etched identification. Includes crank protector. Right-hand thread. Durable corrosion-resistant finish. Lifetime limited warranty.

€62.68 €84.87

Flywheel Puller/Primary Gear Extractor — Black oxide, Carbon steel

-€7.62

MOTION PRO Flywheel Puller/Primary Gear Extractor — Black oxide, Carbon...

Removes flywheels and rotors; includes 4 mm, 5 mm, and 6 mm hardware. Heat-treated, laser-etched, and backed by a lifetime limited warranty.

€21.56 €29.18

-€7.98

MOTION PRO Flywheel Puller — Internal thread, M28 x 1.0, Black oxide

Right hand internal-thread puller for removing flywheels or rotors; includes M14 cap and lifetime limited warranty.

€22.57 €30.55

Flywheel Puller Right Hand Internal Thread — M26 x 1.0, Black oxide

-€8.20

MOTION PRO Flywheel Puller Right Hand Internal Thread — M26 x 1.0, Black...

Precision right-hand internal-thread flywheel puller. Heat treated, laser etched, durable finish and lifetime limited warranty.

€23.18 €31.38

-€3.60

MOTION PRO Oil Filter Removal Tool — Black, Silver

Conical point screw pierces and grabs the sheet metal end cap for easy removal of recessed KTM oil filters. Not for use on reusable filters.

€10.16 €13.76

Flywheel Puller Right Hand Internal Thread — M38 x 1.5, black oxide

-€14.49

MOTION PRO Flywheel Puller Right Hand Internal Thread — M38 x 1.5, black...

Right hand internal thread flywheel puller; laser etched, heat treated, high carbon steel, durable finish, lifetime limited warranty.

€40.94 €55.43

-€15.23

MOTION PRO Deluxe Piston Pin Puller — Blue anodized

Removes piston pins from full skirt and short skirt (slipper) pistons. Fits pins 12 mm (1/2") to 24 mm (1"). Non-marring aluminum pin adapters and interchangeable piston adapters.

€43.05 €58.28

Counter Balancer and Clutch Hub Spanner for Honda — 20 mm ID, 3/8" driver, 4-pin spanner

-€2.96

MOTION PRO Counter Balancer and Clutch Hub Spanner for Honda — 20 mm ID,...

Heat-treated 4-pin spanner for removing Honda counter balancer and clutch hub nuts. 20 mm ID, for use with a 3/8" driver.

€8.38 €11.34

-€10.99

MOTION PRO Side Jaw Pincer Tool — Black, Blue

Compact side-jaw tool for installing Stepless® ear clamps in tight spaces.

€31.07 €42.06

-€7.39

MOTION PRO Flywheel Puller with Thread Protector — M26 x 1.0, Black oxide

Professional puller for safe flywheel and rotor removal. Heat treated, laser-etched, includes thread protector and lifetime limited warranty.

€20.89 €28.28

Legend Gear Saddle Strap SLS — 39 x 21 cm

-€8.60

SW-MOTECH Legend Gear Saddle Strap SLS — 39 x 21 cm

Secure strap for LS1/LS2 saddlebags; universal fit for straight bench seats; includes two double-clamping buckles.

€33.42 €42.02

-€1.72

SW-MOTECH Retention Strap Set for Tail Bags — 20 mm, 4 pack, Black

Replacement retention straps for tail bags. Includes four straps; easy to fit and adjust.

€6.68 €8.40

-€1.38

SW-MOTECH Tie-Down Strap Set for Tail Bags — 2 pack, black

Replacement tie-down straps for tail bags; includes 2 compression straps.

€5.34 €6.72

-€2.24

SW-MOTECH Retention Straps for Drybag M/L — 4-pack, black

Replacement retention straps compatible with Drybag M and Drybag L. Pack includes four straps for straightforward swap-out.

€8.68 €10.92

Flywheel/Rotor Puller Internal Thread — M40 x 1.5, right-hand thread

-€13.31

MOTION PRO Flywheel/Rotor Puller Internal Thread — M40 x 1.5, right-hand...

Internal-thread design protects the crankshaft during rotor removal.
Laser-etched identification for easy tracking.
Heat treated and finished for durability; lifetime limited warranty.

€37.61 €50.92

-€1.72

SW-MOTECH Tension Straps — 4-pack, Black

Replacement tension straps for Drybag 180/250/260/350/450/600/620/700. Includes 4 retention straps.

€6.68 €8.40

Dowel Pin Puller Set — Engine case, black

-€19.22

MOTION PRO Dowel Pin Puller Set — Engine case, black

Compact kit with puller rod and slide hammer for stuck dowel pins. Includes 8 mm, 10 mm, 12 mm and 14 mm collets and a storage tray.

€54.33 €73.55

-€3.43

SW-MOTECH Strap Set Legend — Black

Set of four loop straps (80 cm) and two mounting straps (100 cm) for Legend Gear bags; polyamide straps with anodized aluminum buckles; compatible with all Legend Gear bags.

€13.38 €16.81

-€3.43

SW-MOTECH Strap Set Legend — SW-MOTECH, Cargo, Black

Legend Gear strap set — 4 loop straps (80 cm), 2 mounting straps (100 cm); polyamide straps with anodized aluminum buckles; compatible with all Legend Gear bags.

€13.38 €16.81

Strap Set Legend — 4 loop straps (80 cm), 2 mounting straps (100 cm), Black

-€1.38

SW-MOTECH Strap Set Legend — 4 loop straps (80 cm), 2 mounting straps...

Four 80 cm loop straps and two 100 cm mounting straps for securing Legend Gear bags. Polyamide webbing with anodized aluminum buckles.

€5.34 €6.72

-€3.43

SW-MOTECH ROK Straps — 2-pack, black

Elastic ROK straps with metal buckle and quick-release fastener for secure luggage lashing.

€13.38 €16.81

-€4.29

SW-MOTECH ROK Straps — 2-pack, Black

Durable elastic straps with metal buckle and smooth-edged hardware for secure luggage lashing.

€16.72 €21.01

Crankcase Splitter V2 — Aluminum and steel, black and blue anodized

-€52.83

MOTION PRO Crankcase Splitter V2 — Aluminum and steel, black and blue...

Fast, easy-to-use crankcase splitter with 5 mm, 6 mm and 8 mm puller stud threads, captured retaining collars, grooved studs and molded storage tray.

€205.44 €258.27

Clutch Adjuster Nut Tool — 11/16" clutch adjuster lock nut, fits '98 and later Big Twin Harley-Davidson models, black

-€4.38

MOTION PRO Clutch Adjuster Nut Tool — 11/16" clutch adjuster lock nut,...

Through-hole design holds the clutch adjuster screw while tightening the 11/16" lock nut; deep socket fits into the clutch basket; compact for saddlebags. Not for hydraulic clutches.

€12.40 €16.78

Legend Gear Shoulder Strap — 90–150 cm, Black

-€5.15

SW-MOTECH Legend Gear Shoulder Strap — 90–150 cm, Black

Padded LA4 shoulder strap converts accessory bags into a practical shoulder bag; adjustable 90–150 cm, with secure fastening straps and anodized aluminium hooks.

€20.06 €25.21

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS