TOOLS (2)

$E-Track Strap — 213 cm (84\"), 50.8 mm (2\"), Black, D-ring end$

-€2.44

PARTS UNLIMITED E-Track Strap — 213 cm (84\"), 50.8 mm (2\"), Black, D-ring end

Hooks into the E-Track and features a D-ring end for use with standard tie-downs—quick, versatile cargo control.

€7.93 €10.37

-€19.22

JIMS XL Sprocket Nut Socket Tool — Black

Short socket designed to remove, install and properly tighten the front final drive sprocket/pulley on Harley-Davidson® Sportster models; provides full contact to the nut.

€89.67 €108.89

1" Heavy-Duty Cam Buckle Tie-Downs with Built-In Assist — 66" length, 400 lb capacity, Red

-€6.15

PARTS UNLIMITED 1" Heavy-Duty Cam Buckle Tie-Downs with Built-In Assist — 66"...

Built-in assist for easier tightening.

Cam buckle with 3/8" hooks for secure, simple tie-downs.

€19.99 €26.14

1" Heavy-Duty Cam Buckle Tie-Downs with Built-In Assist — 66" length, 400 lb capacity, Blue

-€6.15

PARTS UNLIMITED 1" Heavy-Duty Cam Buckle Tie-Downs with Built-In Assist — 66"...

Heavy-duty tie-downs with built-in assist, 3/8" hooks and easy operation for maximum holding power.

€19.99 €26.14

-€9.91

JIMS Primary Locking Bar — Primary (Drive), Black

Immobilizes the primary drive for safe maintenance; allows torque-wrench tightening or breaker-bar loosening. Made in the U.S.A.

€46.25 €56.16

Heavy-Duty Ratcheting Tie-Downs with Built-In Assist — 1" × 183 cm, 181 kg (400 lb), black

-€6.15

PARTS UNLIMITED Heavy-Duty Ratcheting Tie-Downs with Built-In Assist — 1" ×...

Heavy-duty ratcheting tie-downs with built-in assist; 400 lb working load limit and vinyl-coated hooks for secure, scratch-resistant attachment.

€19.99 €26.14

Compensator Bolt Torx® Socket — Compensator Bolt Driver, JIMS 5534, Chrome

-€3.84

JIMS Compensator Bolt Torx® Socket — Compensator Bolt Driver, JIMS...

Correct-style Torx driver/socket for the compensating sprocket retaining fastener. Made in the USA.

€17.93 €21.77

Cylinder Torque Plate Kit — 3.75"–3.875" bore, black

-€137.05

JIMS Cylinder Torque Plate Kit — 3.75"–3.875" bore, black

Use these plates when boring or honing late-model aluminum cylinders to simulate running stress conditions. Includes instructions. Made in the U.S.A.

€639.58 €776.63

Heavy-Duty 6' Cam Buckle Tie-Downs — 38.1 mm x 183 cm, 272 kg (600 lb), Blue

-€6.43

PARTS UNLIMITED Heavy-Duty 6' Cam Buckle Tie-Downs — 38.1 mm x 183 cm, 272 kg...

Heavy-duty 1-1/2" x 6' cam buckle straps with S-hooks, 600-lb. working load limit, and full vinyl coating.

€20.88 €27.31

1-1/2" Heavy-Duty Ratcheting Tie-Downs — 1-1/2" × 72", 1,000 lb, Red

-€7.47

PARTS UNLIMITED 1-1/2" Heavy-Duty Ratcheting Tie-Downs — 1-1/2" × 72", 1,000...

1-1/2" x 6' webbing, 5,000-lb. rated
Ratcheting mechanism for easy cinching
Two vinyl-coated hooks, 1,200-lb. straight pull
1,000-lb. working load limit

€24.28 €31.75

1-1/2" Heavy-Duty Ratcheting Tie-Downs — 1-1/2" x 6', 1,000 lb WLL, Blue

-€7.47

PARTS UNLIMITED 1-1/2" Heavy-Duty Ratcheting Tie-Downs — 1-1/2" x 6', 1,000 lb...

Heavy-duty ratcheting tie-down with 1,000 lb working load limit and two vinyl-coated hooks. Sold each.

€24.28 €31.75

1-1/2" W Tie-Down Extensions — 18" long, 3,000 lb

-€2.23

PARTS UNLIMITED 1-1/2" W Tie-Down Extensions — 18" long, 3,000 lb

Looped nylon straps extend tie-down reach and protect finish; adjustable, heavy-duty construction.

€7.26 €9.49

1-1/2" W Tie-Down Extensions — 1-1/2" × 18", 3000 lb assembly strength, Red

-€2.23

PARTS UNLIMITED 1-1/2" W Tie-Down Extensions — 1-1/2" × 18", 3000 lb assembly...

Looped nylon straps for extending tie-down reach
Helps protect handlebars and seat rails
Durable construction for reliable transport

€7.26 €9.49

-€20.05

JIMS Replacement Drive — Cam, Black

Replacement drive for JIMS® cam bearing installation tool — durable, precision-fit component.

€93.56 €113.61

Piston Ring Compressor Set — 47.6 mm–73 mm (1-7/8"–2-7/8"), Set of 4, Black

-€30.04

JIMS Piston Ring Compressor Set — 47.6 mm–73 mm (1-7/8"–2-7/8"),...

Precise ratcheting compressor that compresses piston rings in small increments without damaging them. Made in the U.S.A.

€140.19 €170.23

-€38.14

JIMS Dual Gauge Leakdown Tester — JIMS, Cylinder, 4-Stroke, Black

Dual-gauge design for quick leakdown diagnosis; detects valve-seat leaks, bad rings and head gasket failures.

€177.96 €216.10

-€9.11

JIMS Hydraulic Balancer Retainer Tool — Engine balancer, Silver

Holds hydraulic tensioners to maintain constant chain tension on counter balancer systems. Made in the U.S.A.

€42.48 €51.59

-€42.25

JIMS Mini Valve Spring Tester — Black, Blue

Compact tester for dual-rate and conical valve springs; fits up to 1.6" O.D.; 0–1000 P.S.I. gauge. Made in the U.S.A.

€197.16 €239.41

-€7.93

JIMS Dipstick Removal Tool — Engine oil system, Gray

Safely removes engine oil dipsticks near hot exhausts; fits 3/8" ratchet and 7/8" wrench. Made in the U.S.A.

€37.01 €44.94

-€9.72

JIMS Slim Oil Filter Wrench — 14-flute, Silver

Exclusive slim design for easier access near the oil cooler and crankcase position sensor. More room to work around exhaust pipes, frame, hoses and brackets. Made in the U.S.A.

€45.34 €55.06

-€11.28

JIMS Mighty Bite Flywheel Lock and Tag — Blue

Secures the flywheel for service on Twin Cam motors; installs in place of the crank position sensor and includes a visible decommissioned tag.

€52.65 €63.93

$Piston Ring End Gap Tool — Fits H-D 95\", 103\", 110\" motors, 3.875\" or 4\" bore, blue anodized$

-€19.55

JIMS Piston Ring End Gap Tool — Fits H-D 95\", 103\", 110\" motors,...

Measures piston ring end gap quickly and accurately. Flanged design ensures a square fit in the bore. Fits H-D 95\", 103\", 110\" motors with 3.875\" or 4\" bore.

€91.24 €110.79

-€5.64

PARTS UNLIMITED Heavy-Duty 7’ Cam Buckle Tie-Downs — 84", 400 lb, Red

Heavy-duty cam buckle tie-downs with a 1" nylon web strap, vinyl-coated hooks and a 400-lb working load limit.

€18.33 €23.97

-€5.64

PARTS UNLIMITED Heavy-Duty 7’ Cam Buckle Tie-Downs — 84", 400 lb, 1"

Heavy-duty cam buckle tie-downs with wide nylon straps, vinyl-coated hooks, and a large hand loop for easy tightening. Sold as a pair.

€18.33 €23.97

Tappet Position Holding Tool — Camshaft, Tappet, Black, Blue, Silver

-€16.57

JIMS Tappet Position Holding Tool — Camshaft, Tappet, Black, Blue,...

Protects and organizes tappets during camshaft service; stores pins and tappets for accurate reinstallation. Made in the U.S.A.

€77.34 €93.91

Piston Ring Compressor Set — 73 mm–111.1 mm, Black

-€39.21

JIMS Piston Ring Compressor Set — 73 mm–111.1 mm, Black

Fine-tooth ratcheting compressor for precise ring compression. Won't break or damage rings. Made in the U.S.A.

€182.99 €222.20

-€22.50

JIMS Vacuum Tappet "Pump Up" Tool — Hydraulic pump, Black, Clear

Bleeds and pumps up hydraulic lifters, holds up to four lifters in a vacuum jar, and prepares them for installation.

€105.04 €127.54

-€1.34

PARTS UNLIMITED Oil Filter Wrench — 65 mm (2-9/16") , 3/8" drive, Black

Cup-style oil filter wrench for spin-on filters; eases service in tight spaces; designed for 3/8" drive tools.

€4.35 €5.69

-€1.34

PARTS UNLIMITED Oil Filter Wrench — 68 mm, 14-flute, black

Cup-style oil filter wrench for spin-on filters. Makes hard-to-reach filters easy to service. For use with 3/8" drive tools.

€4.35 €5.69

Oil Filter Wrench — 80 mm (3-1/8"), 15 Flute, Black

-€1.61

PARTS UNLIMITED Oil Filter Wrench — 80 mm (3-1/8"), 15 Flute, Black

Cup-style wrench for spin-on oil filters. Makes hard-to-reach filters easy to service. For use with 3/8" drive tools.

€5.22 €6.83

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS