TOOLS (2)

-€19.22

JIMS XL Sprocket Nut Socket Tool — Black

Short socket designed to remove, install and properly tighten the front final drive sprocket/pulley on Harley-Davidson® Sportster models; provides full contact to the nut.

€89.67 €108.89

-€9.91

JIMS Primary Locking Bar — Primary (Drive), Black

Immobilizes the primary drive for safe maintenance; allows torque-wrench tightening or breaker-bar loosening. Made in the U.S.A.

€46.25 €56.16

Compensator Bolt Torx® Socket — Compensator Bolt Driver, JIMS 5534, Chrome

-€3.84

JIMS Compensator Bolt Torx® Socket — Compensator Bolt Driver, JIMS...

Correct-style Torx driver/socket for the compensating sprocket retaining fastener. Made in the USA.

€17.93 €21.77

Cylinder Torque Plate Kit — 3.75"–3.875" bore, black

-€137.05

JIMS Cylinder Torque Plate Kit — 3.75"–3.875" bore, black

Use these plates when boring or honing late-model aluminum cylinders to simulate running stress conditions. Includes instructions. Made in the U.S.A.

€639.58 €776.63

Variator Blocking Tool — Silver, Transmission

-€1.71

101 OCTANE Variator Blocking Tool — Silver, Transmission

Locking tool for quick installation and removal of the variator. Ideal for drivetrain work and piston stopping.

€7.95 €9.66

Variator Blocking Tool — Transmission, Silver

-€1.78

101 OCTANE Variator Blocking Tool — Transmission, Silver

Locking tool for quick installation and removal of the variator; protects the piston stopper and simplifies drivetrain work.

€8.28 €10.06

Variator Blocking Tool — Transmission, Black

-€2.43

101 OCTANE Variator Blocking Tool — Transmission, Black

Locks the variator for installation and removal. Quick, easy operation; prevents piston damage during maintenance.

€11.33 €13.76

-€20.05

JIMS Replacement Drive — Cam, Black

Replacement drive for JIMS® cam bearing installation tool — durable, precision-fit component.

€93.56 €113.61

Piston Ring Compressor Set — 47.6 mm–73 mm (1-7/8"–2-7/8"), Set of 4, Black

-€30.04

JIMS Piston Ring Compressor Set — 47.6 mm–73 mm (1-7/8"–2-7/8"),...

Precise ratcheting compressor that compresses piston rings in small increments without damaging them. Made in the U.S.A.

€140.19 €170.23

-€38.14

JIMS Dual Gauge Leakdown Tester — JIMS, Cylinder, 4-Stroke, Black

Dual-gauge design for quick leakdown diagnosis; detects valve-seat leaks, bad rings and head gasket failures.

€177.96 €216.10

-€9.11

JIMS Hydraulic Balancer Retainer Tool — Engine balancer, Silver

Holds hydraulic tensioners to maintain constant chain tension on counter balancer systems. Made in the U.S.A.

€42.48 €51.59

-€42.25

JIMS Mini Valve Spring Tester — Black, Blue

Compact tester for dual-rate and conical valve springs; fits up to 1.6" O.D.; 0–1000 P.S.I. gauge. Made in the U.S.A.

€197.16 €239.41

-€7.93

JIMS Dipstick Removal Tool — Engine oil system, Gray

Safely removes engine oil dipsticks near hot exhausts; fits 3/8" ratchet and 7/8" wrench. Made in the U.S.A.

€37.01 €44.94

-€9.72

JIMS Slim Oil Filter Wrench — 14-flute, Silver

Exclusive slim design for easier access near the oil cooler and crankcase position sensor. More room to work around exhaust pipes, frame, hoses and brackets. Made in the U.S.A.

€45.34 €55.06

-€11.28

JIMS Mighty Bite Flywheel Lock and Tag — Blue

Secures the flywheel for service on Twin Cam motors; installs in place of the crank position sensor and includes a visible decommissioned tag.

€52.65 €63.93

$Piston Ring End Gap Tool — Fits H-D 95\", 103\", 110\" motors, 3.875\" or 4\" bore, blue anodized$

-€19.55

JIMS Piston Ring End Gap Tool — Fits H-D 95\", 103\", 110\" motors,...

Measures piston ring end gap quickly and accurately. Flanged design ensures a square fit in the bore. Fits H-D 95\", 103\", 110\" motors with 3.875\" or 4\" bore.

€91.24 €110.79

Tappet Position Holding Tool — Camshaft, Tappet, Black, Blue, Silver

-€16.57

JIMS Tappet Position Holding Tool — Camshaft, Tappet, Black, Blue,...

Protects and organizes tappets during camshaft service; stores pins and tappets for accurate reinstallation. Made in the U.S.A.

€77.34 €93.91

Piston Ring Compressor Set — 73 mm–111.1 mm, Black

-€39.21

JIMS Piston Ring Compressor Set — 73 mm–111.1 mm, Black

Fine-tooth ratcheting compressor for precise ring compression. Won't break or damage rings. Made in the U.S.A.

€182.99 €222.20

-€22.50

JIMS Vacuum Tappet "Pump Up" Tool — Hydraulic pump, Black, Clear

Bleeds and pumps up hydraulic lifters, holds up to four lifters in a vacuum jar, and prepares them for installation.

€105.04 €127.54

-€19.38

JIMS Wrist Pin Adapter — wrist pin, gray

Removes wrist pins from Milwaukee-Eight® engines
Accessory for JIMS® Wrist Pin Tool (DS-196197)
Made in the U.S.A.

€90.42 €109.80

-€19.53

JIMS Cylinder Hold Down Nuts — Blue, fits Twin Cam and Milwaukee Eight

Hold-down nuts for securing the cylinder during head removal; one end fits Twin Cam, the other fits Milwaukee Eight. Made in the U.S.A.

€91.14 €110.67

-€22.79

JIMS Main Seal Installer/Remover — JIMS, Part No. 5810

Tool for installing and removing the main crankshaft seal on Milwaukee Eight engines.

€106.38 €129.17

-€232.43

JIMS Cylinder Torque Plate Kit — 3.937"–4" bore, black

Required when boring or honing late-model aluminum cylinders; simulates running stress; includes instructions; made in the U.S.A.

€797.95 €1,030.38

-€22.86

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€106.67 €129.53

Engine Stand — fits Milwaukee‑Eight Softail engines, 7 gauge (0.1875") steel, powder-coated blue

-€29.02

JIMS Engine Stand — fits Milwaukee‑Eight Softail engines, 7 gauge...

Securely mounts Milwaukee‑Eight Softail engines; fabricated from 7 gauge (0.1875") powder-coated steel for durable use.

€135.41 €164.43

-€6.73

101 OCTANE Spring Tool — 125–155 mm outer diameter

Counterpressure spring mounting tool for convertor units (125–155 mm outer diameter). Compact and easy to use.

€31.36 €38.09

-€2.39

101 OCTANE Clutch Tool — Black

Specialist tool to lock the clutch bell for assembly or disassembly; enables quick, professional work.

€11.14 €13.53

"On-Bike" Valve Spring Compressor — Fits Milwaukee-Eight, Black

-€60.65

JIMS "On-Bike" Valve Spring Compressor — Fits Milwaukee-Eight, Black

On-bike compressor for removing valve spring keepers, collars, and springs without full teardown; designed for Milwaukee-Eight® engines.

€283.01 €343.66

-€12.79

JIMS Exhaust Gasket Seal Installer Tool — Blue

Installs fragile exhaust seals evenly; works with exhaust flange nuts or an optional handle; made in the U.S.A.

€59.68 €72.47

Professional Fuel Injection Pressure Test Tool — Fuel pressure, Black

-€120.13

JIMS Professional Fuel Injection Pressure Test Tool — Fuel...

Quick in-line fuel pressure testing for Delphi injected models. Performs road and dyno checks efficiently. Includes gauge, hoses, valves, adapter and carrying case. Not for '18-'20 Softails.

€560.56 €680.69

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company