TOOLS (2)

Pro Bit and Socket Set - 31 pcs — PEDRO'S Tool Kit, Bicycle

-€20.05

PEDRO'S Pro Bit and Socket Set - 31 pcs — PEDRO'S Tool Kit, Bicycle

Complete 31-piece set with hex and torx bits, 1/4" and 3/8" sockets, crowfoot pedal wrench, and drive adapters in a foam holder.

€56.66 €76.71

-€9.29

FEULING OIL PUMP CORP. Oil Pump Gear Alignment Tool — 9017, Black, Silver

Aligns oil pump gear flats with crankshaft flats for improved scavenge-port sealing. Assemble components on the bench and install the complete unit for best results.

€36.18 €45.47

-€3.67

PEDRO'S Pig Pen — Rebuild Kit

Compact rebuild kit and chain cleaner: cleans 1–13 speed chains using only 1 fl oz of degreaser; includes degreaser (20 ml), dry lube (20 ml) and a gear brush.

€10.39 €14.06

Camplate Roll Pin Removal/Installation Tool — Valve spring application, Black

-€60.51

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Valve spring...

Tool for easy removal and installation of pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€235.80 €296.31

Folding Stand — Height 1,007–1,850 mm, clamp up to 65 mm, 60 kg capacity

-€29.98

PEDRO'S Folding Stand — Height 1,007–1,850 mm, clamp up to 65 mm, 60...

Portable folding repair stand with three-point base, 360° clamp for tubes up to 65 mm, height 1,007–1,850 mm, supports 60 kg.

€299.77 €329.75

-€1.85

SOLAS Impeller Installation Tool — YV, YS impeller series

Quick, safe tool for installing impellers. Match the tool application to your impeller series for proper fit.

€5.91 €7.76

-€8.28

SOLAS Impeller Installation Tool — Fits SX/SRZ/Twin (TP) and Fly series

Makes installing an impeller a snap. To find the proper installation tool for your impeller, match the tool application to the impeller series.

€26.42 €34.70

-€49.32

TECHNORESEARCH O2 Instal Block — Aluminum

O2 wideband sensor sampling block with vent screw for reliable service access.

€191.83 €241.15

-€1.85

TECHNORESEARCH O2 Instal Block — TR200055

Compact sampling block for wideband O2 sensors with vent screw for pressure equalization.

€7.19 €9.04

-€9.07

PEDRO'S Star Nut Setter — 1" & 1-1/8" threadless steerers, Black

Hands-free tool that quickly installs star nuts in 1" and 1-1/8" threadless steerers. Compact, durable design.

€25.64 €34.71

-€7.83

PEDRO'S Pro Brush Kit — Black, Yellow

Complete four-piece brush set for full bike cleaning. Ergonomic handle, varied bristles for durability and gentle cleaning.

€22.14 €29.97

Pro Cutting Guide — 19–39 mm (3/4"–1-1/2")

-€14.98

PEDRO'S Pro Cutting Guide — 19–39 mm (3/4"–1-1/2")

Full-metal cutting guide for 19–39 mm tubes; laser-etched scale; adjustable spacer for carbon or standard blades.

€42.34 €57.32

-€8.00

PEDRO'S The Hammer II — 10.75" (275 mm), 550 g

Two-sided mechanic's hammer with replaceable soft face, 10.75" (275 mm), 550 g, Dice Grip handle.

€22.64 €30.64

-€2.35

PEDRO'S The Hammer II — 10.75" (275 mm), 550 g, Yellow

Two-sided mechanic's hammer with replaceable plastic face, compact 10.75" (275 mm), 550 g.

€6.67 €9.02

-€6.62

PEDRO'S Apron — Black

Pro apron made from strong cotton canvas, three-quarter length with front pockets for easy access. 100% cotton canvas.

€18.74 €25.36

Piston Cooling Jet Pressure Tester Block Kit - Stand Alone Tool — Black, Red kit, fits Twin Cam and M8

-€43.78

FEULING PARTS Piston Cooling Jet Pressure Tester Block Kit - Stand Alone...

Complete set with tool plate, gauge, regulator and hardware. Tests all Twin Cam and M8 piston cooling jets. Stand-alone version for shops lacking the companion reference part.

€123.77 €167.55

Pressure Test Tool — Piston cooling, Twin Cam A/B, M8

-€41.73

FEULING PARTS Pressure Test Tool — Piston cooling, Twin Cam A/B, M8

Complete kit with tool plate, gauge, regulator and hardware. Tests piston cooling jets to diagnose or prevent issues before engine build completion. Stand-alone option for users without a compatible part number.

€162.33 €204.06

-€36.08

FEULING PARTS VVT Cam Torque Reaction Tool — VVT

Allows removal and installation of VVT cam bolts by securing the cam during torquing.

€101.97 €138.05

Piston Cooling Jet Pressure Tester Block — Red

-€25.25

FEULING PARTS Piston Cooling Jet Pressure Tester Block — Red

Tester block to check piston cooling jet pressure for Twin Cam and M8. Includes tool plate and fasteners; fits Feuling tool part# 9010 (sold separately).

€71.40 €96.65

-€1.37

SOLAS Drive Shaft Holding Tool — For YB, YD, YRS, YQ impellers

Secures the impeller driveshaft during maintenance for safe removal and installation.

€4.39 €5.76

Impeller Installation Tool — Fits YF, YG, YD Concord, YQ impellers

-€1.89

SOLAS Impeller Installation Tool — Fits YF, YG, YD Concord, YQ...

Quick tool for reliable impeller installation; reduces damage risk. Match the tool application to your impeller series.

€6.05 €7.94

-€1.89

SOLAS Drive Shaft Holding Tool — for YF, YX, YG impellers

Holds an impeller driveshaft securely during maintenance to prevent rotation and reduce risk of damage.

€6.05 €7.94

-€8.87

PEDRO'S Chain Pig II — Red

Pig-shaped, hands-free chain cleaner with pro-grade brushes and super-absorbent sponge; works on 1–12 speed chains and uses only 1 oz. of degreaser.

€25.09 €33.96

-€4.95

PEDRO'S Six-Pack Chain Tool Plus — Multi-Function

Super-compact, professional-quality chain multi-tool with six functions, including a shop-quality 1–11 speed chain tool and spoke wrenches.

€13.98 €18.93

-€4.91

PEDRO'S Chain Checker Plus II — Black

Precision chain-wear gauge that measures 0.5% and 0.75% wear, isolates pin from roller wear, and includes a chain hook and chainring nut wrench. Compatible with 1–12 speed chains and approved for EAGLE® 12-speed chains.

€13.85 €18.76

-€4.41

PEDRO'S Quick Link Pliers — PEDRO'S, 6460710

Dual-function pliers for installing and removing chain master links; cushioned grips; compatible with most 6–13 speed derailleur chains including SRAM® Eagle 12-speed and Flattop.

€12.45 €16.86

-€13.82

PEDRO'S Shop Chain Tool — Black, Yellow

Screw-type chain tool that simplifies chain removal, installation, and adjustment. Replaceable bridge with adjustable positioning, S2 steel pin on a ball bearing, integrated guide-pin shear slot with spare pin in handle. Stainless steel and composite construction.

€39.07 €52.89

-€11.43

PEDRO'S Pig Pen — Chain Tool, Each

Compact chain cleaner that uses only 1 fl oz of degreaser, scrubs from all angles, and works on 1–13 speed chains. Includes 20 ml degreaser, 20 ml dry lube, and gear brush.

€32.28 €43.71

-€7.88

NAMZ Delphi-Packard Weatherpack Terminal Removal Tool — Green

Universal tool for removing Delphi-Packard Weatherpack terminals; compatible with AMP Multilock and Delphi connectors. Removes pins and receptacles. Made in the USA.

€23.65 €31.53

-€20.11

NAMZ MX-150 Molex Terminal Removal Tool — Black

Precision tool for removing MX-150 Molex terminals. Designed exclusively for MX-150 connectors to minimize pin and housing damage.

€60.33 €80.44

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company