TOOLS (2)

-€26.50

BARNETT Clutch Spring Compression Tool for Victory — Black anodized

Compresses diaphragm clutch springs for easy removal and re-installation of the retainer ring. Made in the USA.

€103.03 €129.53

-€11.10

PEDRO'S Torque Driver — T-handle kit

Infinite torque-limiting clutch prevents over-torquing for precise, repeatable fastening.

€31.38 €42.48

-€9.68

PEDRO'S Cable Cutter — cuts up to 4 mm, Yellow

Ergonomic cutter with cushioned grip and extra jaw overlap for clean, quick cuts of brake and derailleur cables; cuts steel cables up to 4 mm.

€27.35 €37.03

-€7.82

PEDRO'S Cable Puller — Yellow

Ergonomic cable puller with cushioned grip and thumb lock for precise derailleur and brake adjustments.

€22.14 €29.96

Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

-€38.80

FEULING OIL PUMP CORP. Valve Spring Seat Cutter — 0.550 in ID x 1.180 in OD, M8

Machines valve spring seats for correct spring height and spring cup fitment. Hardened pilots for 3/8" and 1/2" drills. Cuts 0.550" ID x 1.180" OD. For M8 heads with high lift cams.

€150.91 €189.71

Pilot Seat Cutter for M8 — for 6 mm valves

-€18.25

FEULING OIL PUMP CORP. Pilot Seat Cutter for M8 — for 6 mm valves

Machines valve spring seats for correct spring height and cup fit. Interchangeable cutter bodies and pilots; hardened pilots fit 3/8 and hand drills. For 6 mm valves.

€70.99 €89.24

Rx Micro 21 — 21-function, 160 g, 1–12 speed chain tool

-€14.89

PEDRO'S Rx Micro 21 — 21-function, 160 g, 1–12 speed chain tool

Compact 21-function multi-tool with 6061 aluminum body, 1–12 speed chain tool, micro levers with quick link storage, and 160 g weight.

€42.13 €57.02

Pro Bit and Socket Set - 31 pcs — PEDRO'S Tool Kit, Bicycle

-€20.05

PEDRO'S Pro Bit and Socket Set - 31 pcs — PEDRO'S Tool Kit, Bicycle

Complete 31-piece set with hex and torx bits, 1/4" and 3/8" sockets, crowfoot pedal wrench, and drive adapters in a foam holder.

€56.66 €76.71

-€32.10

DRAG SPECIALTIES Oil Extractor — 4 L (1.05 US gal.), Black, Clear

Sturdy and portable for quick fluid removal.

€90.73 €122.83

-€9.29

FEULING OIL PUMP CORP. Oil Pump Gear Alignment Tool — 9017, Black, Silver

Aligns oil pump gear flats with crankshaft flats for improved scavenge-port sealing. Assemble components on the bench and install the complete unit for best results.

€36.18 €45.47

-€3.67

PEDRO'S Pig Pen — Rebuild Kit

Compact rebuild kit and chain cleaner: cleans 1–13 speed chains using only 1 fl oz of degreaser; includes degreaser (20 ml), dry lube (20 ml) and a gear brush.

€10.39 €14.06

Camplate Roll Pin Removal/Installation Tool — Valve spring application, Black

-€60.51

FEULING OIL PUMP CORP. Camplate Roll Pin Removal/Installation Tool — Valve spring...

Tool for easy removal and installation of pressure relief spring, by-pass valve and roll pin. Holds the relief spring down and away from the roll pin. Made in the USA.

€235.80 €296.31

Hi-Pressure Shock Pump — 23 cm, rear shock, 0–30 psi, black/silver

-€11.72

DRAG SPECIALTIES Hi-Pressure Shock Pump — 23 cm, rear shock, 0–30 psi,...

Twist-and-lock removable gauge for compact storage. Fits rear shocks and front forks. Rotary flexible hose, die-cast gauge base and ergonomic handle. Precise adjust button for fine control.

€33.10 €44.82

Hi-Pressure Shock Pump — Rear shock, 0–60 psi, 23 cm (9")

-€12.06

DRAG SPECIALTIES Hi-Pressure Shock Pump — Rear shock, 0–60 psi, 23 cm (9")

Twist-and-lock removable gauge, rotary flexible hose, die-cast gauge base and ergonomic handle. Precise adjust button (2–3 psi per push). Fits in small storage areas.

€34.09 €46.15

-€1.97

DRAG SPECIALTIES Clear Timing Hole Plug — 19 mm (3/4"), timing mark, clear

Locates the timing mark without getting an eye full of oil.

€5.57 €7.54

-€46.76

DRAG SPECIALTIES Center Jack — 453 kg (1000 lb), 37 cm (14-1/2"), Black/Gray

Sturdy manual scissor jack with a non-slip rubber top pad and large footprint for stable motorcycle lifting. Not for use with air or electric impact guns.

€132.15 €178.91

-€44.19

DRAG SPECIALTIES Center Jack — 1,000 lb (453 kg), 14-1/2" max height

Sturdy scissor center jack with a durable rubber top pad and wide base for stable motorcycle lifting. Do not use air or electric impact guns.

€124.89 €169.08

Folding Stand — Height 1,007–1,850 mm, clamp up to 65 mm, 60 kg capacity

-€29.98

PEDRO'S Folding Stand — Height 1,007–1,850 mm, clamp up to 65 mm, 60...

Portable folding repair stand with three-point base, 360° clamp for tubes up to 65 mm, height 1,007–1,850 mm, supports 60 kg.

€299.77 €329.75

-€1.73

DRAG SPECIALTIES Cargo Net — 12" x 17", black, vinyl-coated metal hooks

Elastic cargo net secures gear on seats and luggage racks for easy transport and compact storage.

€4.89 €6.62

-€9.07

PEDRO'S Star Nut Setter — 1" & 1-1/8" threadless steerers, Black

Hands-free tool that quickly installs star nuts in 1" and 1-1/8" threadless steerers. Compact, durable design.

€25.64 €34.71

-€7.83

PEDRO'S Pro Brush Kit — Black, Yellow

Complete four-piece brush set for full bike cleaning. Ergonomic handle, varied bristles for durability and gentle cleaning.

€22.14 €29.97

Pro Cutting Guide — 19–39 mm (3/4"–1-1/2")

-€14.98

PEDRO'S Pro Cutting Guide — 19–39 mm (3/4"–1-1/2")

Full-metal cutting guide for 19–39 mm tubes; laser-etched scale; adjustable spacer for carbon or standard blades.

€42.34 €57.32

-€8.00

PEDRO'S The Hammer II — 10.75" (275 mm), 550 g

Two-sided mechanic's hammer with replaceable soft face, 10.75" (275 mm), 550 g, Dice Grip handle.

€22.64 €30.64

-€2.35

PEDRO'S The Hammer II — 10.75" (275 mm), 550 g, Yellow

Two-sided mechanic's hammer with replaceable plastic face, compact 10.75" (275 mm), 550 g.

€6.67 €9.02

-€6.62

PEDRO'S Apron — Black

Pro apron made from strong cotton canvas, three-quarter length with front pockets for easy access. 100% cotton canvas.

€18.74 €25.36

Piston Cooling Jet Pressure Tester Block Kit - Stand Alone Tool — Black, Red kit, fits Twin Cam and M8

-€43.78

FEULING PARTS Piston Cooling Jet Pressure Tester Block Kit - Stand Alone...

Complete set with tool plate, gauge, regulator and hardware. Tests all Twin Cam and M8 piston cooling jets. Stand-alone version for shops lacking the companion reference part.

€123.77 €167.55

Pressure Test Tool — Piston cooling, Twin Cam A/B, M8

-€41.73

FEULING PARTS Pressure Test Tool — Piston cooling, Twin Cam A/B, M8

Complete kit with tool plate, gauge, regulator and hardware. Tests piston cooling jets to diagnose or prevent issues before engine build completion. Stand-alone option for users without a compatible part number.

€162.33 €204.06

-€36.08

FEULING PARTS VVT Cam Torque Reaction Tool — VVT

Allows removal and installation of VVT cam bolts by securing the cam during torquing.

€101.97 €138.05

Piston Cooling Jet Pressure Tester Block — Red

-€25.25

FEULING PARTS Piston Cooling Jet Pressure Tester Block — Red

Tester block to check piston cooling jet pressure for Twin Cam and M8. Includes tool plate and fasteners; fits Feuling tool part# 9010 (sold separately).

€71.40 €96.65

-€4.38

DAYTONA Magnetic Silicone Tray — Orange

Foldable silicone tray with embedded magnet to keep small metal parts organized.

€12.39 €16.77

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company