TOOLS (2)

-€2.19

STAHLWILLE Wrench — 18×21 mm, 140 mm, Chrome

Open-end metric wrench meeting DIN 3110 and ISO 10102; 8×9 mm opening, 140 mm length, b1 18 mm / b2 21 mm, 21 g.

€5.35 €7.54

-€1.54

STAHLWILLE Wrench — 9 mm, 165 mm, Chrome

Combination wrench, DIN 3113 form A, anti-slip drive; spanner opening 14 mm, length 165 mm.

€3.80 €5.34

Compression Bolt Removal Tool — WP 4860 MXMA CC fit, 17 mm hex, Blue anodized

-€4.88

MOTION PRO Compression Bolt Removal Tool — WP 4860 MXMA CC fit, 17 mm...

Removes and installs the compression valve assembly from the fork cap. 17 mm hex head; enables correct torquing during installation. Use caution — fork cap assembly under pressure.

€13.80 €18.68

Gear Jammer™ — Primary gear, Blue anodized

-€4.43

MOTION PRO Gear Jammer™ — Primary gear, Blue anodized

Removes and installs primary gear on Honda CRF450R/X. Locks gears for easy service, allows correct torque on lock nuts, not for impact guns.

€12.53 €16.96

Wall Bracket for T-Handle Rack — Chrome, Silver

-€5.91

MOTION PRO Wall Bracket for T-Handle Rack — Chrome, Silver

Mounts a T-handle rack to a toolbox, wall or post; quick-release pin and built-in bottle opener; fits one-piece T-handle racks.

€16.70 €22.61

ForkTru™ Fork Alignment Tool — 27–62 mm legs, 140–220 mm on center, Blue anodized

-€10.24

MOTION PRO ForkTru™ Fork Alignment Tool — 27–62 mm legs, 140–220 mm on...

Tool for aligning front forks to ensure parallelism from top to bottom. Works with 27–62 mm fork legs and 140–220 mm on-center spacing. Knurled adjustment screws for easy setup and reduced seal/bushing wear.

€28.93 €39.17

Flywheel Puller Right Hand Internal Thread with M12 Cap — M28 x 1.0, black oxide

-€7.69

MOTION PRO Flywheel Puller Right Hand Internal Thread with M12 Cap — M28...

Heat-treated, high-carbon steel puller with right-hand internal thread and M12 cap. Laser-etched, hot black oxide finish and lifetime limited warranty.

€21.73 €29.42

-€22.19

MOTION PRO Flywheel Puller Internal Thread — M50 x 1.5, Black oxide

Removes flywheel or rotor. Heat-treated for strength. Laser-etched identification. Includes crank protector. Right-hand thread. Durable corrosion-resistant finish. Lifetime limited warranty.

€62.68 €84.87

-€2.55

STAHLWILLE Wrench — 17 mm, 16 mm, chrome

Offset metric wrench with chrome alloy construction and precise measurements for confined spaces. Length 180 mm.

€6.22 €8.77

Flywheel Puller/Primary Gear Extractor — Black oxide, Carbon steel

-€7.62

MOTION PRO Flywheel Puller/Primary Gear Extractor — Black oxide, Carbon...

Removes flywheels and rotors; includes 4 mm, 5 mm, and 6 mm hardware. Heat-treated, laser-etched, and backed by a lifetime limited warranty.

€21.56 €29.18

-€4.06

STAHLWILLE Wrench — 18 mm, 21 mm, Chrome

Offset wrench with StahlwilleSTABIL® offset, chrome plated, 8 x 10 mm openings, 180 mm length.

€9.89 €13.95

-€7.98

MOTION PRO Flywheel Puller — Internal thread, M28 x 1.0, Black oxide

Right hand internal-thread puller for removing flywheels or rotors; includes M14 cap and lifetime limited warranty.

€22.57 €30.55

-€2.55

STAHLWILLE Wrench — Chrome, Metric

Combination wrench, metric 8 x 10 mm openings, 180 mm length, chrome plated.

€6.22 €8.77

Flywheel Puller Right Hand Internal Thread — M26 x 1.0, Black oxide

-€8.20

MOTION PRO Flywheel Puller Right Hand Internal Thread — M26 x 1.0, Black...

Precision right-hand internal-thread flywheel puller. Heat treated, laser etched, durable finish and lifetime limited warranty.

€23.18 €31.38

-€2.72

STAHLWILLE Wrench — 8 x 10 mm, 180 mm, Chrome

Combination wrench, 8 x 10 mm opening, 180 mm length, chrome finish.

€6.63 €9.35

-€3.60

MOTION PRO Oil Filter Removal Tool — Black, Silver

Conical point screw pierces and grabs the sheet metal end cap for easy removal of recessed KTM oil filters. Not for use on reusable filters.

€10.16 €13.76

-€0.88

STAHLWILLE Socket — 4 mm drive, chrome finish

T27 tamper-resistant TORX® socket with hollow point; 5.0 mm TORX® size, L1 28 mm, L2 16 mm, d 11.6 mm, 10 g.

€2.17 €3.05

-€0.92

STAHLWILLE Socket — Chrome

Hollow-point TORX® T27 socket, TORX® 5.0 mm, chrome plated, compact 28/16 mm dimensions.

€2.25 €3.17

-€0.88

STAHLWILLE Socket — T27, 5.0 mm, L1 28 mm, Chrome

T27 TORX® socket, 5.0 mm, chrome-plated, L1 28 mm.

€2.17 €3.05

Socket — T27, 5.0 mm, 5.5 mm drive, Chrome

-€0.88

STAHLWILLE Socket — T27, 5.0 mm, 5.5 mm drive, Chrome

Hollow-point socket for inside Torx® tamper-resistant screws. Chrome plated alloy steel. T27, 5.0 mm, L1 28 mm.

€2.17 €3.05

-€0.92

STAHLWILLE Socket — 9 mm, Chrome

Hollow-point socket for tamper-resistant TORX® T27 screws. Chrome plated alloy steel. L1 28 mm, L2 16 mm, d 11.6 mm.

€2.25 €3.17

Socket — T27, 5.0 mm, L1 28 mm, L2 16 mm, d 11.6 mm, chrome

-€0.92

STAHLWILLE Socket — T27, 5.0 mm, L1 28 mm, L2 16 mm, d 11.6 mm, chrome

TORX® T27 socket with hollow point for tamper-resistant TORX® screws. Chrome alloy steel, chrome plated. 5.0 mm.

€2.25 €3.17

-€1.00

STAHLWILLE Socket — T27, 5.0 mm, 28 mm

TORX® T27 — 5.0 mm
Chrome plated chrome alloy steel
Hollow point for tamper-resistant inside TORX® screws
L1 28 mm, L2 16 mm, d 11.6 mm, 10 g

€2.45 €3.45

Flywheel Puller Right Hand Internal Thread — M38 x 1.5, black oxide

-€14.49

MOTION PRO Flywheel Puller Right Hand Internal Thread — M38 x 1.5, black...

Right hand internal thread flywheel puller; laser etched, heat treated, high carbon steel, durable finish, lifetime limited warranty.

€40.94 €55.43

-€0.74

STAHLWILLE Socket — 1/4" drive, Chrome

TORX® T27 socket with hollow point for tamper-resistant inside TORX® screws. Chrome alloy steel, chrome plated. Measurements: TORX® 5.0 mm; L1 28 mm; L2 16 mm; d 11.6 mm; weight 10 g.

€2.58 €3.32

-€0.97

STAHLWILLE Socket — T27, 5.0 mm, L1 28 mm, Chrome

Hollow-point TORX® T27 socket for tamper-resistant screws. TORX® 5.0 mm, L1 28 mm.

€2.38 €3.35

-€2.80

STAHLWILLE Socket — T27, 9 mm, Chrome

Hollow-point T27 Torx socket for tamper-resistant inside TORX® screws. Chrome alloy steel, chrome plated.

€6.83 €9.63

-€2.94

STAHLWILLE Socket — Chrome

TORX® T27 socket with hollow point; chrome alloy steel, chrome plated; TORX® size 5.0 mm; L1 28 mm, L2 16 mm, d 11.6 mm; 10 g.

€7.18 €10.12

-€15.23

MOTION PRO Deluxe Piston Pin Puller — Blue anodized

Removes piston pins from full skirt and short skirt (slipper) pistons. Fits pins 12 mm (1/2") to 24 mm (1"). Non-marring aluminum pin adapters and interchangeable piston adapters.

€43.05 €58.28

-€1.25

STAHLWILLE Socket — STAHLWILLE, Chrome, Flex

TORX® socket T27 (5.0 mm). Hollow point, chrome alloy steel; L1 28 mm, L2 16 mm, weight 10 g.

€3.07 €4.32

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS