TOOLS (2)

Inner Primary Bearing and Seal Remover/Installer Tool — 967-4, Black

-€25.05

JIMS Inner Primary Bearing and Seal Remover/Installer Tool — 967-4,...

Removes and installs the inner primary bearing and seal that the transmission mainshaft passes through by pushing on the bearing's outer perimeter to protect new bearings. Made in the USA.

€97.41 €122.46

Inner Primary Bearing and Seal Remover/Installer Tool — 967-5, Black

-€8.91

JIMS Inner Primary Bearing and Seal Remover/Installer Tool — 967-5,...

Removes and installs inner primary bearings and seals by pushing on the bearing's outer perimeter to prevent damage to new bearings. Made in the USA.

€34.64 €43.55

5-Speed Main Case Seal Installer Tool — Blue

-€23.44

JIMS 5-Speed Main Case Seal Installer Tool — Blue

Ensures correct alignment and seal protection during installation.

Made in the USA.

€91.16 €114.60

Ultimate Clutch Adjusting Tool — Blue, Chrome, '85-'20 Big Twins

-€20.57

JIMS Ultimate Clutch Adjusting Tool — Blue, Chrome, '85-'20 Big Twins

Quickly and accurately tighten the clutch adjusting screw jam nut without moving the screw. Includes Allen wrench that stores in the handle. Made in the USA. Fits all '85-'20 Big Twins with mechanical clutch.

€79.99 €100.56

Shifter Mechanism Sleeve Remover/Installation Tool — Cruise Drive Big Twin fit, Black

-€30.54
Out of Stock

JIMS Shifter Mechanism Sleeve Remover/Installation Tool — Cruise...

Removes and installs the shifter mechanism sleeve in cruise drive Big Twin transmissions without disassembling the transmission.

€118.80 €149.34

-€31.61

JIMS Shifter Shaft Bushing Tool — Black, touring models, 5- or 6-speed

Removes and installs shifter shaft bushings in Big Twin primaries without removing the inner primary. For touring models with 5- or 6-speed transmission. Made in the USA.

€122.97 €154.58

-€16.38

JIMS Countershaft 1st Scissor Gear Alignment Tool — Cruise Drive, Blue

Essential tool for correct installation and tooth mesh of the first scissor gear on the countershaft. Maintains alignment under spring pressure. Made in the USA.

€63.70 €80.08

Balancer Shaft Sprocket Alignment Tool — Balancer Shaft, Drive Chain, Black

-€96.68
Out of Stock

JIMS Balancer Shaft Sprocket Alignment Tool — Balancer Shaft, Drive...

Removes guesswork when aligning the balancer shaft sprocket and chain. Made in the U.S.A.

€375.99 €472.67

-€23.10

JIMS Valve Guide Remover — Black

Removes and installs shoulderless valve guides and valve seals. Made in the U.S.A.

€89.84 €112.94

-€15.43
Out of Stock

JIMS Shoulderless Valve Guide Tool — Valve guide, black

Removes and installs shoulderless valve guides and seals. Made in the U.S.A.

€60.02 €75.45

Thread Chaser Tap Set — coarse sizes 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13, 9/16-12, silver

-€20.26

JIMS Thread Chaser Tap Set — coarse sizes 1/4-20, 5/16-18, 3/8-16,...

Economical set for cleaning painted or powder-coated threads; includes coarse sizes 1/4-20 through 9/16-12; not for cutting new threads; made in the U.S.A.

€78.76 €99.02

-€50.49
Out of Stock

JIMS Oil Filter Cutter — Black

Secures and cuts filter bases for inspection; fits filters up to 5-1/2" diameter.

€196.32 €246.81

Harley Davidson Cruise Drive 6-Speed Main Drive Gear and Bearing Remover/Installer Kit — 6-Speed

-€121.68

JIMS Harley Davidson Cruise Drive 6-Speed Main Drive Gear and...

Complete kit to remove and install the main drive gear or main bearing on Harley-Davidson Cruise Drive transmissions (2006–present). No case damage when used as directed.

€473.22 €594.90

Balancer Inner Bearing Installer — Left side, engine case, kit, black

-€81.42

JIMS Balancer Inner Bearing Installer — Left side, engine case,...

Installs inner balancer bearing in left engine case without an arbor press.
Performs installation on a work bench; fits early and late Beta® cases.
Made in the U.S.A.

€316.65 €398.07

Twin Cam "B" Motor Case Support Blocks — Left side, Engine case, Black

-€32.56

JIMS Twin Cam "B" Motor Case Support Blocks — Left side, Engine...

Aluminum support blocks with Delrin® pads protect and level the Twin Cam "B" engine case during balancer bearing service.

€126.66 €159.22

Cam Bearing Installation Tool — JIMS, Cam, Black

-€64.12
Out of Stock

JIMS Cam Bearing Installation Tool — JIMS, Cam, Black

Installs the two inner cam bearings and sets them .023"-.028" below the case surface.

€249.39 €313.51

-€23.23
Out of Stock

JIMS Replacement Drive — Cam, Black

Replacement drive for JIMS® cam bearing installation tool — durable, precision-fit component.

€90.38 €113.61

-€8.93

JIMS Valve Guide Adapter — 7 mm, black

Stand-supported tool for pressing valve guides in and out. For 7 mm valve guides. Made in the U.S.A.

€34.75 €43.68

-€49.09
Out of Stock

JIMS Feeler Gauge Set — .002–.011 in, Blue/Silver

Precision thickness insert kit with two holders and nine sizes (.002"–.011") for tight-access adjustments. Made in the U.S.A.

€190.93 €240.02

Cruise Drive Main Case Seal Installer — 6-Speed, Main Drive Gear, Black, Blue

-€55.81
Out of Stock

JIMS Cruise Drive Main Case Seal Installer — 6-Speed, Main Drive...

Driver-style installer for main case seals that sets the seal to the correct depth without stressing bearings or seals. Made in the U.S.A.

€217.06 €272.87

Interconnect Seal Leak Testing Tool — Balancer tensioner plate, right, blue

-€16.68

JIMS Interconnect Seal Leak Testing Tool — Balancer tensioner...

Tool to test and verify interconnect seal integrity, preventing over‑oiling and associated horsepower loss.

€64.84 €81.52

-€61.52

JIMS 7mm Valve Guide Reamer — Valve guide, silver

Reamer for 7 mm valve guides, including Harley-Davidson® No. 16461-02. Quality pilot lead-in for precise reaming. Made in the U.S.A.

€239.20 €300.72

Motor Stand — For Twin Cam B Motor, blue powder-coated

-€34.19
Out of Stock

JIMS Motor Stand — For Twin Cam B Motor, blue powder-coated

Improves access for engine work and provides stable support. Made in the USA.

€132.92 €167.11

-€96.10

JIMS Tappet Pump and Test Stand — For '99-'20 Big Twins, Blue

Tool for diagnosing and filling hydraulic tappets; designed for '99-'20 Big Twins. Made in the USA.

€373.72 €469.82

-€11.26

JIMS Slim Oil Filter Wrench — 14-flute, Silver

Exclusive slim design for easier access near the oil cooler and crankcase position sensor. More room to work around exhaust pipes, frame, hoses and brackets. Made in the U.S.A.

€43.80 €55.06

-€24.26
Out of Stock

JIMS Rocker Box Alignment Screws — Rocker Box Cover, Black, Pair

Prevents cover misalignment that can compromise the seal and cause rocker interference. Made in the U.S.A.

€94.40 €118.66

Piston Ring Compressor Set — 73 mm–111.1 mm, Black

-€45.45

JIMS Piston Ring Compressor Set — 73 mm–111.1 mm, Black

Fine-tooth ratcheting compressor for precise ring compression. Won't break or damage rings. Made in the U.S.A.

€176.75 €222.20

-€26.09
Out of Stock

JIMS Vacuum Tappet "Pump Up" Tool — Hydraulic pump, Black, Clear

Bleeds and pumps up hydraulic lifters, holds up to four lifters in a vacuum jar, and prepares them for installation.

€101.45 €127.54

-€26.17

JIMS Flywheel Puller Tool — Black

Safe, reliable flywheel removal with solid engagement and minimal risk to surrounding parts. Made in the U.S.A.

€101.76 €127.93

-€18.99

JIMS Clutch Spring Compressor Adapter — Victory, blue anodized

Securely seats clutch springs for safe removal and installation. Made in the USA. Use with compressor Part# DS-197060.

€73.83 €92.82

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company