TOOLS (2)

-€22.28

JIMS XL Sprocket Nut Socket Tool — Black

Short socket designed to remove, install and properly tighten the front final drive sprocket/pulley on Harley-Davidson® Sportster models; provides full contact to the nut.

€86.61 €108.89

1" Heavy-Duty Cam Buckle Tie-Downs with Built-In Assist — 66" length, 400 lb capacity, Red

-€6.83

PARTS UNLIMITED 1" Heavy-Duty Cam Buckle Tie-Downs with Built-In Assist — 66"...

Built-in assist for easier tightening.

Cam buckle with 3/8" hooks for secure, simple tie-downs.

€19.31 €26.14

1" Heavy-Duty Cam Buckle Tie-Downs with Built-In Assist — 66" length, 400 lb capacity, Blue

-€6.83

PARTS UNLIMITED 1" Heavy-Duty Cam Buckle Tie-Downs with Built-In Assist — 66"...

Heavy-duty tie-downs with built-in assist, 3/8" hooks and easy operation for maximum holding power.

€19.31 €26.14

-€11.49

JIMS Primary Locking Bar — Primary (Drive), Black

Immobilizes the primary drive for safe maintenance; allows torque-wrench tightening or breaker-bar loosening. Made in the U.S.A.

€44.67 €56.16

Compensator Bolt Torx® Socket — Compensator Bolt Driver, JIMS 5534, Chrome

-€4.45

JIMS Compensator Bolt Torx® Socket — Compensator Bolt Driver, JIMS...

Correct-style Torx driver/socket for the compensating sprocket retaining fastener. Made in the USA.

€17.32 €21.77

Cylinder Torque Plate Kit — 3.75"–3.875" bore, black

-€158.86

JIMS Cylinder Torque Plate Kit — 3.75"–3.875" bore, black

Use these plates when boring or honing late-model aluminum cylinders to simulate running stress conditions. Includes instructions. Made in the U.S.A.

€617.77 €776.63

Heavy-Duty 6' Cam Buckle Tie-Downs — 38.1 mm x 183 cm, 272 kg (600 lb), Blue

-€7.14

PARTS UNLIMITED Heavy-Duty 6' Cam Buckle Tie-Downs — 38.1 mm x 183 cm, 272 kg...

Heavy-duty 1-1/2" x 6' cam buckle straps with S-hooks, 600-lb. working load limit, and full vinyl coating.

€20.17 €27.31

1-1/2" Heavy-Duty Ratcheting Tie-Downs — 1-1/2" × 72", 1,000 lb, Red

-€8.30

PARTS UNLIMITED 1-1/2" Heavy-Duty Ratcheting Tie-Downs — 1-1/2" × 72", 1,000...

1-1/2" x 6' webbing, 5,000-lb. rated
Ratcheting mechanism for easy cinching
Two vinyl-coated hooks, 1,200-lb. straight pull
1,000-lb. working load limit

€23.45 €31.75

1-1/2" Heavy-Duty Ratcheting Tie-Downs — 1-1/2" x 6', 1,000 lb WLL, Blue

-€8.30

PARTS UNLIMITED 1-1/2" Heavy-Duty Ratcheting Tie-Downs — 1-1/2" x 6', 1,000 lb...

Heavy-duty ratcheting tie-down with 1,000 lb working load limit and two vinyl-coated hooks. Sold each.

€23.45 €31.75

1-1/2" W Tie-Down Extensions — 18" long, 3,000 lb

-€2.48

PARTS UNLIMITED 1-1/2" W Tie-Down Extensions — 18" long, 3,000 lb

Looped nylon straps extend tie-down reach and protect finish; adjustable, heavy-duty construction.

€7.01 €9.49

1-1/2" W Tie-Down Extensions — 1-1/2" × 18", 3000 lb assembly strength, Red

-€2.48

PARTS UNLIMITED 1-1/2" W Tie-Down Extensions — 1-1/2" × 18", 3000 lb assembly...

Looped nylon straps for extending tie-down reach
Helps protect handlebars and seat rails
Durable construction for reliable transport

€7.01 €9.49

-€23.23

JIMS Replacement Drive — Cam, Black

Replacement drive for JIMS® cam bearing installation tool — durable, precision-fit component.

€90.38 €113.61

-€21.59

JIMS Pushrod Cover Clip — Pushrod, Black

Quick one-hand tool for installing and removing cover clips. Won't mar or slip. Made in the U.S.A.

€83.97 €105.56

Piston Ring Compressor Set — 47.6 mm–73 mm (1-7/8"–2-7/8"), Set of 4, Black

-€34.82

JIMS Piston Ring Compressor Set — 47.6 mm–73 mm (1-7/8"–2-7/8"),...

Precise ratcheting compressor that compresses piston rings in small increments without damaging them. Made in the U.S.A.

€135.41 €170.23

-€44.20

JIMS Dual Gauge Leakdown Tester — JIMS, Cylinder, 4-Stroke, Black

Dual-gauge design for quick leakdown diagnosis; detects valve-seat leaks, bad rings and head gasket failures.

€171.90 €216.10

-€10.56

JIMS Hydraulic Balancer Retainer Tool — Engine balancer, Silver

Holds hydraulic tensioners to maintain constant chain tension on counter balancer systems. Made in the U.S.A.

€41.03 €51.59

-€48.97

JIMS Mini Valve Spring Tester — Black, Blue

Compact tester for dual-rate and conical valve springs; fits up to 1.6" O.D.; 0–1000 P.S.I. gauge. Made in the U.S.A.

€190.44 €239.41

-€9.19

JIMS Dipstick Removal Tool — Engine oil system, Gray

Safely removes engine oil dipsticks near hot exhausts; fits 3/8" ratchet and 7/8" wrench. Made in the U.S.A.

€35.75 €44.94

-€11.26

JIMS Slim Oil Filter Wrench — 14-flute, Silver

Exclusive slim design for easier access near the oil cooler and crankcase position sensor. More room to work around exhaust pipes, frame, hoses and brackets. Made in the U.S.A.

€43.80 €55.06

-€13.08

JIMS Mighty Bite Flywheel Lock and Tag — Blue

Secures the flywheel for service on Twin Cam motors; installs in place of the crank position sensor and includes a visible decommissioned tag.

€50.85 €63.93

$Piston Ring End Gap Tool — Fits H-D 95\", 103\", 110\" motors, 3.875\" or 4\" bore, blue anodized$

-€22.66

JIMS Piston Ring End Gap Tool — Fits H-D 95\", 103\", 110\" motors,...

Measures piston ring end gap quickly and accurately. Flanged design ensures a square fit in the bore. Fits H-D 95\", 103\", 110\" motors with 3.875\" or 4\" bore.