TOOLS (2)

-€7.71

MOTION PRO Spinner II T-Handle Tool with Swivel Drive — 12" (30.5 cm),...

Bearing-mounted spinner for faster bolt and nut removal. Two-step drive head for swivel or fixed drive. Chrome-vanadium handle with padded grip.

€25.08 €32.79

Flywheel Puller Right Hand Internal Thread — M30 x 1.0, Black oxide

-€7.98

MOTION PRO Flywheel Puller Right Hand Internal Thread — M30 x 1.0, Black...

Durable, heat-treated puller for safe flywheel or rotor removal. Right hand thread. Lifetime limited warranty.

€25.94 €33.92

Flywheel Puller Right Hand Internal Thread — M33 x 1.5, black oxide

-€12.40

MOTION PRO Flywheel Puller Right Hand Internal Thread — M33 x 1.5, black...

Reliable right-hand flywheel puller for safe removal of flywheels and rotors. Heat treated, durable finish, lifetime limited warranty.

€40.29 €52.69

-€7.73

MOTION PRO Spinner II T-Handle Tool with Swivel Drive — 12", 1/4", Blue

Bearing-mounted spinner for faster bolt and nut removal; two-step drive head for swivel or fixed drive; padded grip for comfort.

€25.12 €32.85

Flywheel Puller Right Hand Internal Thread — M24 x 1.5, right-hand thread, black oxide

-€7.83

MOTION PRO Flywheel Puller Right Hand Internal Thread — M24 x 1.5,...

Precision flywheel puller with right-hand internal thread. Heat treated, durable protective finish, lifetime limited warranty.

€25.47 €33.30

-€2.27

MOTION PRO Float Bowl Wrench — Silver anodized

Removes 17 mm float bowl drain plugs; doubles as a high-speed compression adjuster for most Showa, KYB, and WP rear shocks. 12-point, low-profile design.

€7.36 €9.63

Seal/Bearing Retainer Tool — 47 mm lock rings, 22 mm hex, silver

-€6.98

MOTION PRO Seal/Bearing Retainer Tool — 47 mm lock rings, 22 mm hex, silver

Precision tool to remove and replace rear wheel bearing/seal retainer rings for 47 mm lock rings; features a 22 mm hex.

€22.68 €29.66

Heavy Duty Straight-Folding Ramp — 80" x 11" (203 x 28 cm), 362 kg (800 lb), Powder Coated

-€20.95

MOOSE OFFROAD HARD-PARTS Heavy Duty Straight-Folding Ramp — 80" x 11" (203 x 28 cm),...

Center-folding mesh ramp with welded carrying handle, rubber-coated fingers, and included tie down straps. Warning: do not ride motorcycles or ATVs on the ramp.

€78.00 €98.95

Recovery/Traction Boards — 104 cm (41"), 30 cm (11.75"), 10,000 lb capacity, red

-€21.95

MOOSE OFFROAD HARD-PARTS Recovery/Traction Boards — 104 cm (41"), 30 cm (11.75"),...

Reinforced nylon recovery boards that flex under load and assist in freeing vehicles from mud, snow, and sand. Mounting hardware included.

€50.00 €71.95

$Recovery/Traction Boards — 104 cm (41\"), 30 cm (11-3/4\"), 10,000 lb capacity$

-€21.95

MOOSE OFFROAD HARD-PARTS Recovery/Traction Boards — 104 cm (41\"), 30 cm (11-3/4\"),...

Durable reinforced nylon recovery boards offering flexibility and support for recoveries in mud, snow, and sand; mounting hardware included.

€50.00 €71.95

MOOSE OFFROAD HARD-PARTS Wheel Chock — 88.9 mm (3-1/2"), front mount, Black

Secures the leading wheel in the bed of a truck, van or trailer. Includes mounting hardware; installs with common tools.

€34.95

MOOSE OFFROAD HARD-PARTS Wheel Chock — 13 cm (5") width, front mount, Black

Mounts to the bed of trucks, vans, and trailers; permanent hardware included; designed to hold the front wheel.

€35.95

-€34.95

MOOSE OFFROAD HARD-PARTS Metric Flywheel Puller Set — 10-piece, M14–M28 thread sizes

Metric 10-piece puller set includes common M14–M28 thread pitches and a storage case for organized transport.

€77.00 €111.95

Compression Bolt Removal Tool — WP 4860 MXMA CC fit, 17 mm hex, Blue anodized

-€4.40

MOTION PRO Compression Bolt Removal Tool — WP 4860 MXMA CC fit, 17 mm...

Removes and installs the compression valve assembly from the fork cap. 17 mm hex head; enables correct torquing during installation. Use caution — fork cap assembly under pressure.

€14.28 €18.68

Gear Jammer™ — Primary gear, Blue anodized

-€3.98

MOTION PRO Gear Jammer™ — Primary gear, Blue anodized

Removes and installs primary gear on Honda CRF450R/X. Locks gears for easy service, allows correct torque on lock nuts, not for impact guns.

€12.98 €16.96

Wall Bracket for T-Handle Rack — Chrome, Silver

-€5.32

MOTION PRO Wall Bracket for T-Handle Rack — Chrome, Silver

Mounts a T-handle rack to a toolbox, wall or post; quick-release pin and built-in bottle opener; fits one-piece T-handle racks.

€17.29 €22.61

ForkTru™ Fork Alignment Tool — 27–62 mm legs, 140–220 mm on center, Blue anodized

-€9.22

MOTION PRO ForkTru™ Fork Alignment Tool — 27–62 mm legs, 140–220 mm on...

Tool for aligning front forks to ensure parallelism from top to bottom. Works with 27–62 mm fork legs and 140–220 mm on-center spacing. Knurled adjustment screws for easy setup and reduced seal/bushing wear.

€29.95 €39.17

Flywheel Puller Right Hand Internal Thread with M12 Cap — M28 x 1.0, black oxide

-€6.93

MOTION PRO Flywheel Puller Right Hand Internal Thread with M12 Cap — M28...

Heat-treated, high-carbon steel puller with right-hand internal thread and M12 cap. Laser-etched, hot black oxide finish and lifetime limited warranty.

€22.49 €29.42

-€19.98

MOTION PRO Flywheel Puller Internal Thread — M50 x 1.5, Black oxide

Removes flywheel or rotor. Heat-treated for strength. Laser-etched identification. Includes crank protector. Right-hand thread. Durable corrosion-resistant finish. Lifetime limited warranty.

€64.89 €84.87

Flywheel Puller/Primary Gear Extractor — Black oxide, Carbon steel

-€6.86

MOTION PRO Flywheel Puller/Primary Gear Extractor — Black oxide, Carbon...

Removes flywheels and rotors; includes 4 mm, 5 mm, and 6 mm hardware. Heat-treated, laser-etched, and backed by a lifetime limited warranty.

€22.32 €29.18

-€7.19

MOTION PRO Flywheel Puller — Internal thread, M28 x 1.0, Black oxide

Right hand internal-thread puller for removing flywheels or rotors; includes M14 cap and lifetime limited warranty.

€23.36 €30.55

Flywheel Puller Right Hand Internal Thread — M26 x 1.0, Black oxide

-€7.38

MOTION PRO Flywheel Puller Right Hand Internal Thread — M26 x 1.0, Black...

Precision right-hand internal-thread flywheel puller. Heat treated, laser etched, durable finish and lifetime limited warranty.

€24.00 €31.38

-€3.24

MOTION PRO Oil Filter Removal Tool — Black, Silver

Conical point screw pierces and grabs the sheet metal end cap for easy removal of recessed KTM oil filters. Not for use on reusable filters.

€10.52 €13.76

MOOSE OFFROAD FOUR WHEEL Transmission Locking Nut Tool — Silver, fits Polaris Phoenix

Removes locking nut on the transmission output. Fits Polaris Phoenix models.

€44.95

Flywheel Puller Right Hand Internal Thread — M38 x 1.5, black oxide

-€13.04

MOTION PRO Flywheel Puller Right Hand Internal Thread — M38 x 1.5, black...

Right hand internal thread flywheel puller; laser etched, heat treated, high carbon steel, durable finish, lifetime limited warranty.

€42.39 €55.43

-€13.72

MOTION PRO Deluxe Piston Pin Puller — Blue anodized

Removes piston pins from full skirt and short skirt (slipper) pistons. Fits pins 12 mm (1/2") to 24 mm (1"). Non-marring aluminum pin adapters and interchangeable piston adapters.

€44.56 €58.28

MOOSE OFFROAD FOUR WHEEL Heavy-Duty Tie-Downs — 183 cm (72"), 612 kg (1350 lb), Black

Durable, heavy-duty tie-downs with rubber-coated hooks and Moose Utility Division branding; made in the U.S.A.

€30.95

MOOSE OFFROAD FOUR WHEEL Heavy-Duty Tie-Downs — 183 cm (72") , 612 kg (1350 lb), Red

Durable pair of tie-down straps with oversized rubber-coated hooks and printed logo; made in the U.S.A.

€30.95

$Heavy-Duty Tie-Downs — 183 cm (72\"), 612 kg (1,350 lb), Blue$

MOOSE OFFROAD FOUR WHEEL Heavy-Duty Tie-Downs — 183 cm (72\"), 612 kg (1,350 lb), Blue

Durable, heavy-duty tie-downs with oversized rubber-coated hooks and printed straps. Made in the U.S.A.

€30.95

$Heavy-Duty Tie-Downs — 183 cm (72\"), 612 kg (1,350 lb), 25.4 mm (1\"), Black$

MOOSE OFFROAD FOUR WHEEL Heavy-Duty Tie-Downs — 183 cm (72\"), 612 kg (1,350 lb), 25.4...

Durable ratchet tie-downs with oversized rubber-coated hooks and 6' straps printed with the Moose Utility Division logo. Made in the U.S.A.

€45.95

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS