TOOLS (19)

-€10.88

JIMS Crankshaft Guide — Crankcase, Gray

Spreads the pinion bearing rollers for right-side case reassembly. Made in the U.S.A.

€50.76 €61.64

-€32.78

JIMS Sprocket Shaft Seal Installer — Sprocket shaft, Black

Installs sprocket seals to the correct depth and holds them square for reliable sealing. Use with a driver handle. Made in the U.S.A.

€152.98 €185.76

-€28.13

JIMS Optional Seal Driver — Main shaft, 5-Speed transmission

Optional drivers for use with the main shaft seal tool to install seals accurately.

€131.22 €159.35

Timken® Bearing Race Installer — Crankcase, Left Side, Black, Silver

-€79.38

JIMS Timken® Bearing Race Installer — Crankcase, Left Side, Black,...

Installs bearing race straight into the left crankcase. A must for late-model cases. Made in the U.S.A.

€370.45 €449.83

-€16.07
Out of Stock

JIMS Piston Pin Keeper Tool — Black

Installs round circlip rings in one step without distorting the ring for secure wrist pin retention. Use to install piston retaining rings. Made in the U.S.A.

€74.96 €91.03

-€9.86
Out of Stock

MOTION PRO Tappet Feeler Gauge — 0.10–0.13 mm, 6 pack, gray

Allows accurate tappet adjustments with an angled blade for easy access. Made in the U.S.A.

€32.01 €41.87

Tappet Feeler Gauge — 0.05–0.08 mm, 0.10–0.13 mm, 0.15–0.20 mm, Gray

-€9.86
Out of Stock

MOTION PRO Tappet Feeler Gauge — 0.05–0.08 mm, 0.10–0.13 mm, 0.15–0.20...

Precision tool for tappet adjustments with an angled blade for easy access. Made in the U.S.A.

€32.01 €41.87

Tappet Adjustment Tool — Hydraulic adjuster, Pushrod application, Blue, Silver

-€8.88

JIMS Tappet Adjustment Tool — Hydraulic adjuster, Pushrod...

Hand tool for verifying tappet adjustment. Confirms tip fit and endplay; not compatible with solid or limited-travel tappets. Made in the United States.

€41.46 €50.34

-€72.15

JIMS Rocker Bushing Reaming Tool — Rocker Box, Silver

Precision line reamer for rocker bushings; reams to .0007"–.0012" for factory fit. Made in the U.S.A.

€336.73 €408.88

Cam and Pinion Gear Gauge Pins — 0.108" gauge, gray

-€9.17

JIMS Cam and Pinion Gear Gauge Pins — 0.108" gauge, gray

Check pinion gear pitch diameters. Refer to the service manual for sizing. Made in the U.S.A.

€42.84 €52.01

-€75.90

JIMS Clutch Gear Puller — Main shaft, kick starter, 4-speed, bronze

Removes kick starter clutch gear without damage; made in the United States.

€354.18 €430.08

-€6.21

MOTION PRO Side Case Puller — Silver Anodized, Right

Removes the right side-case cover on compatible Harley-Davidson models; kit includes bracket, puller bolt and set screws. Made in USA.

€17.53 €23.74

-€9.51
Out of Stock

MOTION PRO Springer Fork Compression Tool — Springer front fork, Silver

Assists in disassembly and assembly of springer-type front forks on Harley-Davidson motorcycles. Made in the USA.

€26.88 €36.39

On sale!
-€7.09

MOTION PRO Cable Luber V3 — 4–8 mm, Blue

Seals and lubricates 4–8 mm cable housings for clean, low-waste maintenance. Compatible with free-spinning end fittings.

€20.06 €27.15

-€25.71

JIMS Ignition Switch Housing Alignment Tool — Blue

Aligns ignition switch housing while tightening screws and positions the switch for proper fork lock engagement.

€120.00 €145.71

-€9.90

JIMS Spark Plug and O² Sensor Thread Chaser — M12 x 1.25, Black

Restores damaged spark plug and O² sensor I.D. threads. Three-flute design with generous lead-in pilot for smooth thread repair. Made in the USA.

€46.16 €56.06

Onboard Diagnostic Voltmeter — Black, Red

-€24.09
Out of Stock

JIMS Onboard Diagnostic Voltmeter — Black, Red

Attaches to the battery for quick diagnosis of charging system and battery issues; works with 6 V and 12 V systems. Made in the USA.

€112.40 €136.49

-€22.95

JIMS Tire Air Pressure Gauge — 0–60 psi, Black

Records pressure until release button is engaged
Shock-resistant rubber-coated exterior
Made in the U.S.A.

€107.08 €130.03

Valve Stem Seal Install Tool Set — 4 mm, 4.5 mm, 5 mm, 5.5 mm, Blue anodized

-€13.04
Out of Stock

MOTION PRO Valve Stem Seal Install Tool Set — 4 mm, 4.5 mm, 5 mm, 5.5 mm,...

Contoured handle cradles and protects the seal lip while directing force to the outer rim.

Set of four pilot sizes: 4 mm, 4.5 mm, 5 mm, 5.5 mm for most modern off-road motorcycles and ATVs.

Slim profile for easy access to valve guides in compact heads; rounded tip prevents damage during installation.

€42.39 €55.43

-€3.72
Out of Stock

MOTION PRO Ergo Spoke Wrench — 6.8 mm, Silver, Polished

Combination spoke wrench with open and semi-closed ends and an ergonomic handle for increased turning radius, torque and grip. Limited lifetime warranty.

€12.11 €15.83

Master Cylinder Hydraulic Brake Bleeding Solution — Silver, Front/Rear/Clutch kit

-€69.58

JIMS Master Cylinder Hydraulic Brake Bleeding Solution — Silver,...

Vacuum-bleed kit with a transparent cap; includes five caps and gaskets. Vacuum pump not included. Made in the U.S.A.

€324.68 €394.26

-€15.04

JIMS Master Cylinder Brake Bleeding Solution — Front brake, Silver

Transparent sealing cap that attaches to the master cylinder for a cleaner, low-fluid brake bleeding process. Vacuum pump not included.

€70.14 €85.18

-€76.32
Out of Stock

JIMS 5-Speed Transmission Main Drive Gear Tool — 5-Speed, Black

Installs and removes the main drive gear without removing the transmission. Made in the USA.

€356.14 €432.46

Primary Locking Bar — Primary Belt Drive, Primary Chain Drive, Black

-€8.26
Out of Stock

JIMS Primary Locking Bar — Primary Belt Drive, Primary Chain Drive,...

Immobilizes the primary drive for safe tightening and loosening during maintenance. Prevents rotor and magnet damage.

€38.54 €46.80

-€9.04
Out of Stock

JIMS Primary Locking Bar — Primary Belt Drive, Primary Chain Drive,...

Immobilizes the primary drive for secure maintenance. Enables torque-wrench tightening and breaker-bar loosening. Protects rotor and magnets. Made in the U.S.A.

€42.14 €51.18

Jumbo Chain Tool — fits 420–630 chains, rivets up to 530

-€36.17

MOTION PRO Jumbo Chain Tool — fits 420–630 chains, rivets up to 530

Heavy-duty jumbo chain tool for breaking and riveting roller chains; includes master link side plate press kit and a boltable base for use with power wrenches.

€117.59 €153.76

-€13.08

MOTION PRO Clutch Holding Tool — Silver, Steel

Holds clutch hubs, flywheels, gears and sprockets. Recommended for square tooth-style clutch hubs. Features 8 mm spanner pins; jaws open up to 5" wide. Will not work on clutch baskets with reversed inner clutch hubs. Not recommended for V-groove or half-round-style clutch hubs. Replaces HD tool# HD-91042; used on '84 and later 1340 cc models and '84 and earlier sportster models.

€42.52 €55.60

-€60.30
Out of Stock

MOTION PRO Nitrogen Shock Gauge & Filler — Black, Blue

Portable nitrogen shock gauge and filler with bleeder valve, T-handle swivel chuck and 12" flexible hose. 300 psi capacity; includes instructions and carrying case.

€195.99 €256.29

-€17.48

JIMS O² Sensor Wrench — Black

Removes and installs O² sensors without removing exhaust pipes. 12 mm. Made in the USA.

€81.54 €99.02

Fuel Injector Cleaner Kit For EV1/EV6 — For EV6 fuel injector, Blue anodized

-€54.62

MOTION PRO Fuel Injector Cleaner Kit For EV1/EV6 — For EV6 fuel injector,...

Kit to flush and back-flush EV1/EV6 injectors; push-button operation with LED, pigtail and 9V battery included. No compressed air required.

€154.34 €208.96

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company