TOOLS (16)

-€92.59

JIMS Wrist Pin Bushing Reaming Tool — Gray

Reams wrist pin bushings to the correct inner diameter. Use with rods in or out of the motor. Lead-in taper for easy alignment. Made in the U.S.A.

€360.09 €452.68

-€26.87

JIMS Fork Seal and Cap Installer — 39 mm fork tube, black

Seats seals and caps without scratching tubes. Lightly grease contact surfaces before use. Made in the U.S.A.

€104.50 €131.37

Exhaust Stud Drill Plate — Blue, anodized

-€40.00

JIMS Exhaust Stud Drill Plate — Blue, anodized

Positions exhaust port seals evenly and works with exhaust flange nuts. Made in the U.S.A.

€155.56 €195.56

-€27.36

JIMS Hardware Organizer M8 — Blue

Milwaukee Eight specific hardware organizer that indexes bolts, aids Loctite application, and includes a magnetic tray; made in the USA.

€106.40 €133.76

-€6.95

MOOSE OFFROAD HARD-PARTS Shock Spanner Tool — Shock

Tool for adjusting hard-to-reach rear shock lockout collars; brass-tipped, curved tip, heavy-duty handle.

€19.65 €26.60

-€50.24

JIMS Big Twin Cam Seal Tool — Camshaft, Black

Simple tool to install or remove cam seals without removing the cam cover. Presses new seal square and flat. Made in the U.S.A.

€195.38 €245.62

-€21.42

MOOSE OFFROAD HARD-PARTS Pinion Bearing Tool — Black

Removes and reinstalls the pinion bearing nut in Yamaha differentials for precise, damage-free service.

€60.53 €81.95

-€19.00

MOOSE OFFROAD HARD-PARTS Pinion Bearing Lock Nut Tool — black

Removes and reinstalls 4-prong pinion bearing lock nuts on Yamaha 4-wheelers.

€53.72 €72.72

-€63.32

JIMS Rocker Bushing and Roller Bearing Puller — Rocker box, Black

Removes rocker bushings and roller bearings in a single operation. Made in the U.S.A.

€246.20 €309.52

-€24.26
Out of Stock

JIMS Oil Pump Snap Ring Installer — Black

Tool for installing the outer snap ring on oil pump shafts; prevents over-stretching and speeds assembly. Made in the U.S.A.

€94.39 €118.65

-€32.79

JIMS Oil Pump Seal Installer — Oil System, Black

Installs oil pump seals below the gear surface for a leak-free fit. Fits Big Twin aluminum oil pumps (except Twin Cam/M8). Made in the U.S.A.

€127.51 €160.30

-€38.71

JIMS Clutch Spring Compressor Tool — Blue

Releases the clutch spring for easy retainer ring removal and installation. Made in the USA.

€150.53 €189.24

Ball Joint Removal Tool — A-Arm front suspension, Black

-€13.10

MOOSE OFFROAD HARD-PARTS Ball Joint Removal Tool — A-Arm front suspension, Black

Removes and installs ball joints using a standard shop press without damaging control arms or the joint. Fits 2008 and newer ATVs and UTVs with arm-style front suspension.

€37.07 €50.17

-€25.92
Out of Stock

JIMS Clutch Spring Tool — Black

Releases clutch spring tension for easy disassembly. Made in the U.S.A.

€100.81 €126.73

Universal Bearing Driver Tool Set — 8–47 mm adaptors, 8–30 mm ID / 32–47 mm OD, Black

-€36.96

MOOSE OFFROAD HARD-PARTS Universal Bearing Driver Tool Set — 8–47 mm adaptors, 8–30 mm...

Compact set with one durable handle and 12 anodized aluminum adaptors (8–47 mm); blow-molded case; use with hammer or press.

€104.44 €141.40

-€53.82

JIMS Pulley Locker — Transmission, Blue

Locks the pulley for removal or installation of the pulley nut. Made in the U.S.A.

€209.31 €263.13

Spanner Wrench for WP Forks — KTM 48 mm WP forks, Blue

-€4.53

MOOSE OFFROAD HARD-PARTS Spanner Wrench for WP Forks — KTM 48 mm WP forks, Blue

4-pin spanner wrench for KTM 48 mm WP forks. Slim design for cap removal without removing handlebars. Comfort handle.

€12.84 €17.37

-€7.21

MOOSE OFFROAD HARD-PARTS Dual-Chamber Closed Cartridge Fork Cap Tool — Red

12.5 mm slot holds the damper rod to remove the rebound bolt; for removing fork caps on dual-chamber cartridge forks; fits most Honda (except '10 CRF250R) and Yamaha motorcycles.

€20.41 €27.62

-€12.61

JIMS Crankshaft Guide — Crankcase, Gray

Spreads the pinion bearing rollers for right-side case reassembly. Made in the U.S.A.

€49.03 €61.64

Dual-Chamber Closed Cartridge Fork Cap Tool — WP 4860 MXMA, Red, Silver

-€7.21

MOOSE OFFROAD HARD-PARTS Dual-Chamber Closed Cartridge Fork Cap Tool — WP 4860 MXMA,...

Secures the damper rod with a 12 mm slot; fits WP 4860 MXMA dual‑chamber closed cartridges; removes the fork cap.

€20.41 €27.62

-€38.00
Out of Stock

JIMS Sprocket Shaft Seal Installer — Sprocket shaft, Black

Installs sprocket seals to the correct depth and holds them square for reliable sealing. Use with a driver handle. Made in the U.S.A.

€147.76 €185.76

-€8.56

MOOSE OFFROAD HARD-PARTS Shock Seal Head Tool Set — Black

Precision tool set for removing and installing seal head assemblies, with a knurled grip and universal fit.

€24.19 €32.75

-€32.60
Out of Stock

JIMS Optional Seal Driver — Main shaft, 5-Speed transmission

Optional drivers for use with the main shaft seal tool to install seals accurately.

€126.75 €159.35

Shock Seal Head Tool for 50 mm WP Shock — Black

-€8.56

MOOSE OFFROAD HARD-PARTS Shock Seal Head Tool for 50 mm WP Shock — Black

Helps remove and install seal head assemblies on 50 mm WP shocks; knurled grip for precise control; durable, heat-treated construction.

€24.19 €32.75

-€8.56

MOOSE OFFROAD HARD-PARTS Shock Seal Head Tool for 33-36 mm Shock — Black

Tool for easy removal and installation of seal head assemblies on 33-36 mm shocks; knurled grip for precise control.

€24.19 €32.75

Timken® Bearing Race Installer — Crankcase, Left Side, Black, Silver

-€92.01

JIMS Timken® Bearing Race Installer — Crankcase, Left Side, Black,...

Installs bearing race straight into the left crankcase. A must for late-model cases. Made in the U.S.A.

€357.82 €449.83

-€18.62

JIMS Piston Pin Keeper Tool — Black

Installs round circlip rings in one step without distorting the ring for secure wrist pin retention. Use to install piston retaining rings. Made in the U.S.A.

€72.41 €91.03

-€7.75

MOOSE OFFROAD HARD-PARTS Body Rivet Pliers — Black, Blue

Universal pliers that quickly pull plastic rivet heads using narrow hooked teeth for a secure grip and easy removal.

€21.92 €29.67

-€7.30
Out of Stock

MOOSE OFFROAD HARD-PARTS Oil Drain Pan — 8 L (2.11 US gal.), Black

Drain used oil and antifreeze cleanly and safely. Heavy-wall construction and a large handle make carrying and pouring simple.

€15.65 €22.95

Tappet Adjustment Tool — Hydraulic adjuster, Pushrod application, Blue, Silver

-€10.29

JIMS Tappet Adjustment Tool — Hydraulic adjuster, Pushrod...

Hand tool for verifying tappet adjustment. Confirms tip fit and endplay; not compatible with solid or limited-travel tappets. Made in the United States.

€40.05 €50.34

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS