TOOLS (16)

-€47.49
Out of Stock

JIMS Sprocket Shaft Bearing Nut Wrench — JIMS, 97235-55B

Tool for installing and removing bearing nuts; compact, durable construction. Made in the U.S.A.

€184.68 €232.17

-€27.20

MOOSE OFFROAD FOUR WHEEL Honda Pinion Bearing Nut Tool — Pinion bearing, Yellow

Tool for removing and reinstalling the pinion bearing nut on Honda ATVs; straightforward to use and service-focused.

€65.00 €92.20

-€80.88

JIMS Pinion Gear Puller — Pinion gear, Black

Installs and removes pressed-on splined pinion gears on Harley-Davidson Big Twin and Sportsters; made in the U.S.A.

€377.51 €458.39

-€30.45

MOOSE OFFROAD FOUR WHEEL Kawasaki ATV Pinion Nut Tool — Yellow, Pinion Bearing

Pinion tool for Kawasaki ATVs. Only compatible with front applications. Durable construction for field use.

€72.00 €102.45

Connecting Rod Wrist Pin Bushing Tool — Wrist pin, Black

-€40.59

JIMS Connecting Rod Wrist Pin Bushing Tool — Wrist pin, Black

Removes and installs wrist pin bushings without removing connecting rods from crankcases.
Includes instructions for easy use.
Made in the U.S.A.

€189.45 €230.04

Polaris Ball Joint Replacement Tool — kit, black/silver, fits pressed-in lower ball joints on Polaris ATV/UTV

-€43.57

MOOSE OFFROAD FOUR WHEEL Polaris Ball Joint Replacement Tool — kit, black/silver, fits...

Includes adapters and hardware to remove and install pressed-in lower ball joints on Polaris ATVs and side-by-sides.

€105.00 €148.57

-€59.45

MOOSE OFFROAD FOUR WHEEL Aluminum Ramp — 216 cm (85") length, 117 cm (46") width

Durable, lightweight, weather-resistant ramp with E-Z grip rubber truckrests and nylon straps.

€248.00 €307.45

-€72.35

JIMS Cam Bearing Puller — Camshaft, Black

Removes cam bearings cleanly and straight after camshafts are removed from the support plate.

€337.62 €409.97

-€41.95

MOOSE OFFROAD FOUR WHEEL Aluminum Ramp — 180 cm x 122 cm, Bi-Fold

Durable, lightweight ramp with a weather-resistant finish. Includes E-Z grip rubber truckrests and nylon straps. Folds for compact storage.

€158.00 €199.95

-€57.51

JIMS Crankshaft Bearing Tool — Crankcase, Right, Black

Removes and installs bearings without damaging the case. Ideal for shop use.

€268.33 €325.84

-€41.36

JIMS Wrist Pin Tool — Black, Blue, Silver, JIMS 1276

A handheld tool that simplifies wrist pin removal and installation for one-person operation. Made in the U.S.A.

€192.96 €234.32

-€48.90

JIMS Inner Cam Bearing Removal Tool — Cam, crankcase, black

Removes inner cam bearings without damaging the crankcase. Prevents rollers from falling into the crankcase. Includes instructions. Made in the United States.

€228.16 €277.06

-€21.65

JIMS Castlenut Socket — for inverted forks, black

Adapts a wrench to remove castle nuts and access the shock cylinder. Made in USA.

€101.04 €122.69

Rod Holder Tool — JIMS kit, Black, Blue, Silver, P/N 1284

-€72.03

JIMS Rod Holder Tool — JIMS kit, Black, Blue, Silver, P/N 1284

Secures rods during reaming or honing of wrist pin bushings. Made in the USA. Fits most V-Twin and Buell Blast applications.

€234.09 €306.12

-€8.67

JIMS Rod Alignment Tool — 114.3 mm (4-1/2"), Silver

Checks rod straightness without removing rods from the cases. Made in the U.S.A.

€40.47 €49.14

MOOSE OFFROAD HARD-PARTS Retractable Ratcheting Tie Down — 10', 1", 400 lb, Black

Quick push-button retracting ratchet stores excess webbing inside the housing for a clean, secure setup; zinc-plated metal components with a plastic-coated handle for comfortable use.

€49.15

MOOSE OFFROAD HARD-PARTS Retractable Ratcheting Tie Down — 10' (305 cm), 400 lb...

Quick, retracting ratchet straps that keep excess webbing contained. 400 lb working load limit; 1,200 lb breaking strength.

€49.15

-€36.05

JIMS Alternator Rotor Tool — 45A

Must-have puller for 45A charging systems; protects sprocket shaft threads and works with Harley-Davidson® alternators.

€168.27 €204.32

MOOSE OFFROAD HARD-PARTS Retractable Ratcheting Tie Down — 10' (305 cm), 181 kg (400...

Retracting ratchets set up in seconds and keep excess webbing neatly housed; zinc-plated metal components and plastic-coated handle.

€49.15

-€21.65
Out of Stock

JIMS Optional Seal Driver — Main shaft, Transmission, 4-Speed, Black

Optional drivers for use with the primary seal installation tool to help install seals.

€101.04 €122.69

Brake Caliper Piston Remover — Front and rear 4-piston calipers, gray, red

-€24.90
Out of Stock

JIMS Brake Caliper Piston Remover — Front and rear 4-piston...

Removes and holds caliper pistons square for safe seal and wiper installation on 4-piston front and rear calipers.

€116.24 €141.14

-€69.37

JIMS Wrist Pin Bushing Reaming Tool — wrist pin, Gray

Reams wrist pin bushings to the proper inner diameter. Use with rods in or out of the motor; lead-in taper for easy entry.

€323.69 €393.06

-€79.88

JIMS Wrist Pin Bushing Reaming Tool — Gray

Reams wrist pin bushings to the correct inner diameter. Use with rods in or out of the motor. Lead-in taper for easy alignment. Made in the U.S.A.

€372.80 €452.68

-€23.18

JIMS Fork Seal and Cap Installer — 39 mm fork tube, black

Seats seals and caps without scratching tubes. Lightly grease contact surfaces before use. Made in the U.S.A.

€108.19 €131.37

Exhaust Stud Drill Plate — Blue, anodized

-€34.51

JIMS Exhaust Stud Drill Plate — Blue, anodized

Positions exhaust port seals evenly and works with exhaust flange nuts. Made in the U.S.A.

€161.05 €195.56

-€23.61
Out of Stock

JIMS Hardware Organizer M8 — Blue

Milwaukee Eight specific hardware organizer that indexes bolts, aids Loctite application, and includes a magnetic tray; made in the USA.

€110.15 €133.76

MOOSE OFFROAD HARD-PARTS Shock Spanner Tool — Shock

Tool for adjusting hard-to-reach rear shock lockout collars; brass-tipped, curved tip, heavy-duty handle.

€26.60

-€43.35

JIMS Big Twin Cam Seal Tool — Camshaft, Black

Simple tool to install or remove cam seals without removing the cam cover. Presses new seal square and flat. Made in the U.S.A.

€202.27 €245.62

-€25.95

MOOSE OFFROAD HARD-PARTS Pinion Bearing Tool — Black

Removes and reinstalls the pinion bearing nut in Yamaha differentials for precise, damage-free service.

€56.00 €81.95

-€22.72

MOOSE OFFROAD HARD-PARTS Pinion Bearing Lock Nut Tool — black

Removes and reinstalls 4-prong pinion bearing lock nuts on Yamaha 4-wheelers.

€50.00 €72.72

shop by category

TOOLS

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

Contact us

Products

Our company

shop by category

TOOLS  

Subcategories

General Tools

VTwin & Specific Tools

Workshop Equipment

TOOLS